LEGRAND Adorne LC7001 User manual

Whole House Lighting Controller
LC7001
radiant®RF Lighting Control
adorne®Wi-Fi Ready Lighting Control
1308243 REV. F
User Guide

Whole House Lighting Controller - LC7001 1308243 REV. F
2
Compliance
FCC Notice – FCC ID
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) These devices may not cause harmful interference; and (2) these devices must
accept any interference received, including interference that may cause undesired operation.
Canadian Department of Communications – IC
These devices comply with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) these devices may not cause interference; and (2)
these devices must accept any interference, including interference that may cause undesired
operation of the devices.
These Class B digital apparatus comply with Canadian ICES-003.
301 Fulling Mill Road, Suite G
Middletown, PA 17057
[phone]
© Copyright 2019 by Legrand, Inc. All Rights Reserved.
www.legrand.us

Whole House Lighting Controller - LC7001 1308243 REV. F
3
Table of Contents
Quick Links .......................................................... 4
Overview............................................................... 5
Prerequisites........................................................ 6
LC7001 Operation................................................ 7
Setting up Remote Access .............................. 8
Amazon Alexa Voice Control Integration .......... 9
Prerequisites.................................................... 9
Connecting Alexa to the Legrand Lighting
Control System ................................................ 9
Grouping Discovered Devices ....................... 13
Create a Group ......................................... 13
Supported Commands .................................. 14
Google Home Voice Control Integration ......... 15
Prerequisites.................................................. 15
Connecting Google Home to the Legrand
Lighting Control System ................................ 15
Assigning Devices to a Room........................ 18
Supported Commands................................... 18
Legrand Lighting Control App Functionality .. 19
System Discovery................................................ 19
Add a Lighting Device.................................... 19
Using the Legrand Lighting Control App.............. 20
Turn All Lights ON or OFF ............................. 20
View Recent and Upcoming Scenes ............. 20
Go to the Lights Page.................................... 20
Go to the Scenes Page ................................. 22
Add a Scene.............................................. 22
Edit a Scene.............................................. 25
Go to Settings................................................ 26
Setting a Location ..................................... 26
Set Time Zone........................................... 26
Set Daylight Savings Time ........................ 26
In-Wall Scene Controllers.......................... 27
Perform a Firmware Update...................... 31
Check the Current Version of the App....... 31
QMotion®Advanced Shading System
Integration.......................................................... 32
Prerequisites.................................................. 32
Integrating QMotion Shades.......................... 33
Connecting QMotion to the Legrand Lighting
Control System.......................................... 33
Lighting Control App Functionality with Shades
from QMotion................................................. 34
Display Changes ....................................... 34
Shade Device Functionality....................... 35
Apple Watch Operation..................................... 36
Accessing the App ......................................... 36
Lights Screen ............................................ 36
Scenes Screen.......................................... 37

Whole House Lighting Controller - LC7001 1308243 REV. F
4
Quick Links
LC7001 Operation
How many RF Lighting Control devices can I control
with the LC7001?
Which legacy RF Lighting Control devices (DRDx
part numbers) are compatible with the LC7001?
What is the maximum distance that I can have
between RF Lighting Control devices?
How do I add a lighting device to my system?
How do I remove a light so it no longer appears in my
App?
How do I rename a light?
How do I create a scene?
How do I edit a scene?
How do I automate a scene?
How do I perform a rmware update?
How do I set my location?
How many Legrand Scene Controllers can I add to
the LC7001 and how do I add them?
Legrand cloud
How do I sign up to use Legrand cloud?
Voice Integration
How do I use Amazon Alexa to control the LC7001?
How do I use Google Home to control the LC7001?
QMotion®Shades Integration
What is QMotion?
Are there any prerequisites for adding QMotion to my
Lighting Control System?
How many QMotion shades can I control with the
LC7001?
How do I add QMotion to my Lighting Control
System?
Where is my Lights page?
What is the Devices page?
How can I use my Lighting Control App to control my
QMotion shades?
Apple Watch Integration
How do I use my Apple Watch to control the
LC7001?
Note: Amazon, Echo, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its afliates.
Google, Google Home, and all related logos are trademarks of Google, Inc. or its afliates.

Whole House Lighting Controller - LC7001 1308243 REV. F
5
Overview
This user guide (P/N 1308243) provides operating information for the Legrand Whole House
Lighting Controller (LC7001) and the Lighting Control iOS/Android mobile app.
The LC7001 is compatible with all dimmer, switch, and scene controller products in both the
radiant®(RF Lighting Control) and adorne®(Wi-Fi Ready) collections. The compatible legacy
RF Lighting Control devices include the DRD2x dimmer, DRD3x switch, and DRD4x dimmer.
The DRD9x fan speed controller is discoverable as a dimmer and offers only adjustable speed
control in that capacity.
The LC7001 works in conjunction with the Legrand Lighting Control iOS/Android app to provide
uninterrupted control and automation of RF Lighting Control System devices. Connecting the
LC7001 to a home network with an Ethernet cable and then using the app through a mobile
device enables you to:
• manage your home lighting system.
• set up to 100 manual and automated scenes.
• perform RF Lighting Control device discovery for up to 100 devices.
RF Lighting Control devices offer a default range of 100 ft. between devices. Using a MRR2-G
repeater extends this range by 100 ft. The system supports up to two repeaters for a maximum
range of 300 ft. between devices.
Once you have set up remote access via Legrand cloud, you can control the system when you
are outside of the home network, such as when you are at work or on vacation.

Whole House Lighting Controller - LC7001 1308243 REV. F
6
Prerequisites
The proper function and control of the LC7001 Whole House Lighting Controller depends on the
following requirements:
• proper installation, conguration, and house/group binding of all system components, per
Legrand instructions, prior to the installation of the LC7001.
• a wired connection to the home network router or switch.
• connection of mobile devices running the Legrand Lighting Control app to the same home
network as the LC7001 for setup and conguration of the system.
NOTES:
• Refer to the installation instructions included with your lighting device for detailed information
on binding and conguration.
• The Legrand Lighting Control app is available through the App Store and Google Play Store.
• Legrand’s rmware and app (version 3.0 or later) support the QMotion Advanced Shading
System. Learn about integrating with the QMotion Advanced Shading System.
• Legrand’s rmware and app (version 1.3 or later) support the Apple Watch. Learn about
pairing an Apple Watch to an Apple iPhone.

Whole House Lighting Controller - LC7001 1308243 REV. F
7
LC7001 Operation
The LC7001 Whole House Lighting Controller operates through the Legrand Lighting Control
app for iOS and Android smartphone and tablet mobile devices. The app displays a single-pane
view on a smartphone and a double-pane view on a tablet.
The LC7001 allows for remote access to the system via Legrand cloud. Setting up a Legrand
cloud account provides voice control capability for the LC7001 through Amazon Alexa and the
Google Assistant.

Whole House Lighting Controller - LC7001 1308243 REV. F
8
Setting up Remote Access for
RF Lighting Control
NOTE: Set up remote access ONLY when you are
home and your phone is connected to the same
wireless network as your hub.
Create a remote access account.
1. Sign in to the Legrand
Lighting Control app.
A prompt appears for
remote access setup with
three options:
»No Thanks (exits the
account setup)
»Yes (sets up a remote
account)
»Later (sets the prompt
appearance for the
next time the app is
open)
Select Yes.
NOTE: To open the Remote Access Setup
prompt, go to Settings > Remote Access
Info > Remote Access Setup in the Legrand
Lighting Control app.
2. Tap .
3. Sign in to an existing
account or select Sign
up now to create a new
account.
4. Request a verication
code, then verify the code
before moving forward.
The verication code
will be sent to the email
address you provide.
5. Once the code is veried,
create a password and
ll in the remainder of the
prole.
6. Tap .
Your setup is complete.
You will be redirected
back to the app.

Whole House Lighting Controller - LC7001 1308243 REV. F
9
Amazon Alexa Voice Control Integration
Prerequisites
Enabling voice control of the Legrand Lighting Control System through devices with Amazon
Alexa requires the following:
• a device with Amazon Alexa (i.e. Amazon Echo) connected to the home network
• the Legrand Whole House Lighting Control System (LC7001)
• the Amazon Alexa app installed on a mobile device
• an Internet connection
• the Legrand Lighting Control app, version 4.0 or later, installed on a mobile device
• an active Legrand cloud account
NOTES:
• For instruction on creating and integrating a Legrand cloud account with the LC7001, refer
to “Setting up Remote Access” in the Legrand Whole House Lighting Controller User Guide
or go to Settings > Remote Access Info > Remote Access Setup in the Legrand Lighting
Control app.
• If you are transitioning your RF Lighting Control devices from Samsung ARTIK Cloud to
Legrand Cloud, please ensure you have disabled the previous Samsung skill and that you
have deleted all devices from the Alexa app.
Connecting Alexa to the Legrand Lighting Control System
1. Open the Alexa app.
2. Select to open the side menu.
3. Select Skills & Games from the menu.
4. Open the Search option.

Whole House Lighting Controller - LC7001 1308243 REV. F
10
5. Search for Legrand, then select the
Legrand Lighting Control option.
Legrand has multiple Amazon Skills.
Be sure to pick the appropriate skill.
6. Select ENABLE TO USE.
7. Sign in to your Eliot Account. If you don’t have an
Eliot Account, select the option to create one.
An activation link will be sent, so you can nish
creating your account.

Whole House Lighting Controller - LC7001 1308243 REV. F
11
8. Click Accept to grant Amazon Alexa permission
to access your Legrand data.
9. After receiving a successful link message,
close the window and return to the Skills page.

Whole House Lighting Controller - LC7001 1308243 REV. F
12
10.Select Discover Devices to import the
Legrand Lighting Control System devices into Alexa.
11. All done! Once your devices are discovered,
you can group them by room for convenient
operation.
NOTES:
• Device discovery can take up to 20 seconds.
• Device discovery must be performed after devices are added to the Legrand Lighting Control
app. In the Alexa app, go to Smart Home. Under Your Devices, select Discover Devices.

Whole House Lighting Controller - LC7001 1308243 REV. F
13
Grouping Discovered Devices
Use the Alexa app to designate groups of Legrand Lighting Control System devices. Groups
allow control of multiple devices using a single Alexa command.
Example: A group named “basement” can have multiple devices located in the basement
assigned to the group for control at one time.
Create a Group
1. Open the Alexa app and select Smart Home.
2. Select Create group.
3. Name the group.
4. Select the devices for control in the group.
5. Save the group.

Whole House Lighting Controller - LC7001 1308243 REV. F
14
Supported Commands
Alexa supports both switching and dimming commands. Switching commands simply turn
devices on and off. Dimming commands allow various levels of control to be applied to the
devices.
NOTE: Dimming commands only activate dimmable devices. While all dimmable and non-
dimmable devices in the same group respond to switching commands, only the dimmable
devices can respond to dimming commands.
Use the following supported control commands to change the light level for your controlled devices.
To turn a light ON/OFF
Alexa, turn <on/off> < light/room name >
Dim a light
(Results in an adjustment level of 45% for dimmable devices)
Alexa, dim the < light/room name >
Brighten a light
(Results in an adjustment level of 45% for dimmable devices)
Alexa, brighten the < light/room name >
Set a light brightness to a certain percentage
Alexa, set < light/room name > to <1-100%>
Dim/Brighten lights to a certain percentage
Alexa, dim/brighten < light/room name > to <1-100%>
Turn ON/OFF all the lights
Alexa, turn < on/off > everything

Whole House Lighting Controller - LC7001 1308243 REV. F
15
Google Home Voice Control Integration
Prerequisites
Enabling voice control of the Legrand Lighting Control System through Google Home requires
the following:
• a Google Home device
• the Legrand Whole House Lighting Controller (LC7001)
• the latest version of the Google Home app
• the latest version of the Google app (Android only)
• a Google account
• an Internet connection
• the Legrand Lighting Control app, version 4.0 or newer
• an active Legrand cloud account integrated with the user’s Legrand Whole House Lighting
Controller (LC7001).
NOTE: For instruction on creating and integrating a Legrand cloud account with the LC7001,
refer to “Setting up Remote Access” in the Legrand Whole House Lighting Controller User Guide
or go to Settings > Remote Access Info > Remote Access Setup in the Legrand Lighting
Control app.
Connecting Google Home to the Legrand Lighting Control
System
1. Open the Google Home app.
2. Select Add.
3. Select Set up device.

Whole House Lighting Controller - LC7001 1308243 REV. F
16
4. On the Set up page, select
Works with Google.
5. On the Manage accounts page, search
for Legrand.
6. Select Legrand Lighting Control.
Legrand has multiple Google Actions.
Be sure to pick the appropriate Action.
7. Sign in to your Eliot Account. If you don’t have
an Eliot Account, select the option to create one.
An activation link will be sent, so you can
nish creating your account.

Whole House Lighting Controller - LC7001 1308243 REV. F
17
8. Click Accept to grant Google permission to
access your Legrand data.
9. All done! Return to the home screen to see
your added devices. Now, you can link these
devices to your home and sort them into rooms.
To add or change devices in your RFLC
system in the future, simply say “Hey Google,
sync my devices.”

Whole House Lighting Controller - LC7001 1308243 REV. F
18
Assigning Devices to a Room
Google Home supports the control of Legrand Lighting
Control System devices, and other enabled devices,
with a single voice command using the ROOMS tab.
For details on setting up rooms, follow Step 4 of the
instructions on the Google support site at: https://support.
google.com/googlenest/answer/9159862?hl=en.
Supported Commands
Use the following supported control commands to change the light level for your controlled devices.
To turn a light ON/OFF
Ok Google, turn <on/off> < light/room name >
Dim a light
(Results in an adjustment level of 45% for dimmable devices)
Ok Google, dim the < light/room name >
Brighten a light
(Results in an adjustment level of 45% for dimmable devices)
Ok Google, brighten the < light/room name >
Set a light brightness to a certain percentage
Ok Google, set < light/room name > to <1-100%>
Dim/Brighten lights to a certain percentage
Ok Google, dim/brighten < light/room name > to <1-100%>
Turn ON/OFF all the lights
Ok Google, turn < on/off > everything

Whole House Lighting Controller - LC7001 1308243 REV. F
19
Legrand Lighting Control App Functionality
This section details how to add and control system components and explains how to create,
delete, and automate lighting scenes.
System Discovery
The system discovery process initiates when opening the Legrand
Lighting Control app for the rst time. System discovery adds
devices to the LC7001 by wirelessly discovering a lighting device
in the home after it is touched. A prompt appears to begin adding
devices.
NOTE: All RF lighting devices must be properly house and group
bounded prior to the installation of the LC7001. Reference the
individual device instructions for information on this process.
Add a Lighting Device
1. Tap a device to discover it on the system.
2. Name the device.
3. Repeat for each Legrand lighting device being added to the
LC7001.

Whole House Lighting Controller - LC7001 1308243 REV. F
20
Using the Legrand Lighting Control App
After system discovery is complete, a dashboard
screen appears. The dashboard provides access to
various functions within the app.
• Turn All Lights ON or OFF
• View Recent and Upcoming Scenes
• Go to the Lights Page
• Go to the Scenes Page
• Go to Settings
Turn All Lights ON or OFF
Tap Turn All Lights On to collectively turn all of your lighting devices ON at the same time
when they are OFF. The button reads Turn All Lights Off to turn your lighting devices OFF
when they are ON.
• Press and hold Turn All Lights On to gradually increase the brightness of all of your
lighting devices to full brightness.
• With the lighting devices ON, swipe left and right to increase and lower the brightness of all
of your devices at once.
View Recent and Upcoming Scenes
• Recent Scenes : Select to view recent scenes triggered on the system.
• Upcoming Scenes : Select to view upcoming scenes set to occur within two days.
Go to the Lights Page
Select at the bottom of the dashboard screen.
The Lights page appears, displaying the names of all
controllable lighting devices within the system. This screen
shows the following options:
• : status of each lighting device (blue indicates ON).
• : current brightness level.
NOTE: If integrating with the QMotion Advanced Shading
System, refer to “Display Changes” on page 34.