LEGRAND Adorne LC7001 User manual

Whole House Lighting Controller
LC7001
radiant®RF Lighting Control
adorne®Wi-Fi Ready Lighting Control
1308243 REV. C
User Guide

Whole House Lighting Controller - LC7001 1308243 REV. C
2
Compliance
FCC Notice – FCC ID
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) These devices may not cause harmful interference; and (2) these devices must
accept any interference received, including interference that may cause undesired operation.
Canadian Department of Communications – IC
These devices comply with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) these devices may not cause interference; and (2)
these devices must accept any interference, including interference that may cause undesired
operation of the devices.
These Class B digital apparatus comply with Canadian ICES-003.
301 Fulling Mill Road, Suite G
Middletown, PA 17057
[phone]
© Copyright 2017 by Legrand, Inc. All Rights Reserved.
www.legrand.us

Whole House Lighting Controller - LC7001 1308243 REV. C
3
Table of Contents
Overview............................................................... 4
Prerequisites........................................................ 5
LC7001 Operation................................................ 6
Samsung ARTIK™ Cloud Functionality................. 6
Setting up Remote Access ............................. 7
Amazon Alexa Voice Control Integration*.............. 8
Prerequisites.................................................... 8
Connecting Alexa to the Legrand Lighting
Control System ................................................ 8
Grouping Discovered Devices ....................... 10
Create a Group ......................................... 10
Supported Commands .................................. 11
Google Home Voice Control Integration*............. 12
Prerequisites.................................................. 12
Connecting Google Home to the Legrand
Lighting Control System ................................ 12
Assigning Devices ......................................... 14
Supported Commands................................... 14
Legrand Lighting Control App Functionality .. 15
System Discovery................................................ 15
Add a lighting device ..................................... 15
Using the Legrand Lighting Control App.............. 16
Turn All Lights ON or OFF ............................. 16
View Recent and Upcoming Scenes ............. 16
Go to the Lights page .................................... 16
Go to the Scenes page.................................. 18
Add a Scene.............................................. 18
Edit a Scene.............................................. 21
Go to Settings................................................ 22
Setting a Location ..................................... 22
Set Time Zone........................................... 22
Set Daylight Savings Time ........................ 22
In-Wall Scene Controllers.......................... 23
Perform a rmware update........................ 27
Check the current version of the app ........ 27
Apple Watch Operation..................................... 28
Accessing the App ......................................... 28
Lights Screen ............................................ 28
Scenes Screen.......................................... 29
Quick Links
What is the benet of using Samsung ARTIK™
Cloud and how does it work with my system?
How do I sign up to use Samsung ARTIK™ Cloud?
How many RF Lighting Control devices can I
control with the LC7001?
Which legacy RF Lighting Control devices (DRDx
part numbers) are compatible with the LC7001?
What is the maximum distance that I can have
between RF Lighting Control devices?
How do I add a lighting device to my system?
How do I remove a light so it no longer appears in
my App?
How do I rename a light?
How do I create a scene?
How do I edit a scene?
How do I automate a scene?
How do I perform a rmware update?
How do I set my location?
How many Legrand Scene Controllers can I add to
the LC7001 and how do I add them?
How do I use my Apple Watch to control the
LC7001?
How do I use Amazon Alexa to control the
LC7001?
How do I use Google Home to control the LC7001?

Whole House Lighting Controller - LC7001 1308243 REV. C
4
Overview
This user guide (P/N 1308243) provides operating information for the Legrand Whole House
Lighting Controller (LC7001) and the Lighting Control iOS/Android mobile app.
The LC7001 is compatible with all dimmer, switch, and scene controller products in both the
radiant®(RF Lighting Control) and adorne®(Wi-Fi Ready) collections. The compatible legacy
RF Lighting Control devices include the DRD2x dimmer, DRD3x switch, and DRD4x dimmer.
The DRD9x fan speed controller is discoverable as a dimmer and offers only adjustable speed
control in that capacity.
The LC7001 works in conjunction with the Legrand Lighting Control iOS/Android app and
the Samsung ARTIK™ Cloud platform to provide uninterrupted control and automation of RF
Lighting Control System devices. Connecting the LC7001 to a home network with an Ethernet
cable and then using the app through a mobile device enables you to:
• manage your home lighting system.
• set up to 100 manual and automated scenes.
• perform RF Lighting Control device discovery for up to 100 devices.
RF Lighting Control devices offer a default range of 100 ft. between devices. Using a MRR2-G
repeater extends this range by 100 ft. The system supports up to two repeaters for a maximum
range of 300 ft. between devices.
When logged into the Samsung ARTIK™ Cloud, you can control the system when you are
outside of the home network, such as when you are at work or on vacation.

Whole House Lighting Controller - LC7001 1308243 REV. C
5
Prerequisites
The proper function and control of the LC7001 Whole House Lighting Controller depends on the
following requirements:
• proper installation, conguration, and house/group binding of all system components, per
Legrand instructions, prior to the installation of the LC7001.
• a wired connection to the home network router or switch.
• connection of mobile devices running the Legrand Lighting Control app to the same home
network as the LC7001 for setup and conguration of the system.
NOTES:
• Refer to the installation instructions included with your lighting device for detailed information
on binding and conguration.
• The Legrand Lighting Control app is available through the Apple and Google Play stores.
• Legrand’s rmware and app (version 1.3 or later) support the Apple Watch. Learn about
pairing an Apple Watch to an Apple iPhone.

Whole House Lighting Controller - LC7001 1308243 REV. C
6
LC7001 Operation
The LC7001 Whole House Lighting Controller operates through the Legrand Lighting Control
app for iOS and Android smartphone and tablet mobile devices. The app displays a single-pane
view on a smartphone and a double-pane view on a tablet.
The LC7001 is compatible with Samsung ARTIK™ Cloud to support remote access to the
controller through the Legrand Lighting Control app. Using Samsung ARTIK Cloud also allows
voice control of the LC7001 through Amazon Alexa and Google Home devices. This section
details how to set up remote access using the Samsung ARTIK Cloud functionality and
describes how to establish voice control through Amazon Alexa and Google Home devices.
Samsung ARTIKTM Cloud Functionality
The Samsung ARTIK Cloud provides a pathway for the LC7001 to communicate with system
lighting devices when accessing the app from outside of the home network. This optional
functionality is compatible with Android devices (iOS coming soon) and is not required for the
operation of the lighting system.
NOTE: The mobile app and the LC7001 rmware must be version 2.0 or later to enable the
Samsung ARTIK Cloud functionality.

Whole House Lighting Controller - LC7001 1308243 REV. C
7
Setting up Remote Access
Create a remote access account.
1. Log into the Legrand
Lighting Control app.
A prompt appears for
remote access setup with
three options:
• No Thanks.
• Later (the prompt
appears the next time
the app is opened).
• YES.
NOTE: Initiate the Remote Access Setup
prompt at <Settings <Remote Access Info
<Remote Access Setup.
2. Choose YES to set up
remote access.
A screen appears to
introduce the Samsung
ARTIK Cloud.
3. Tap .
4. Sign in using one of the
following options:
• Samsung
• Google
• NAVER
• Existing email
(If signing into an
existing account,
enter a new password
to link the existing
account to your app.)
If an account does not exist, choose
.
5. Enter the prole
information requested.
6. Tap .
7. Grant permission for
ARTIK Cloud to integrate
with your system
8. Look for the activation
email sent to conrm the
account email address.
9. Follow the instructions in
the email to activate the
account.
10. Return to the app.
• If prompted, sign
into your Samsung
ARTIK™ Cloud
account.
• If not prompted,
use the cellular
service on your
mobile device or
an alternate Wi-Fi
network to gain
remote access.

Whole House Lighting Controller - LC7001 1308243 REV. C
8
Amazon Alexa Voice Control Integration*
*Amazon, Echo, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its afliates.
Prerequisites
Users enabling voice control of the Legrand Lighting Control System through devices with
Amazon Alexa require the following:
• a device with Amazon Alexa (i.e. Amazon Echo) connected to the home network
• the Legrand Whole House Lighting Control System (LC7001)
• the Amazon Alexa app installed on a mobile device
• an Internet connection
• the Legrand Lighting Control app, version 2.0 or newer, installed on a mobile device
• an active Samsung ARTIK™ Cloud account integrated with the user’s Legrand Whole
House Lighting Controller (LC7001).
NOTE: For instruction on creating and integrating a Samsung ARTIK Cloud account with the
LC7001, refer to “Setting up Remote Access” in the Legrand Whole House Lighting Controller
User Guide or navigate to <Settings <Remote Access Info <Remote Access Setup in the
Legrand Lighting Control app.
Connecting Alexa to the Legrand Lighting Control System
1. Open the Alexa App and select Skills.
2. Search for ARTIK.
3. Select the Samsung ARTIK Cloud
Optimized for Smart Home option.

Whole House Lighting Controller - LC7001 1308243 REV. C
9
4. Select Enable.
5. Sign in to your Samsung ARTIK™
Cloud Account.
6. After receiving a successful link message,
tap Xto close the window and return to the
Skills page.
7. Choose Discover Devices to import
the Legrand Lighting Control System
devices into Alexa.
NOTES:
• Device discovery can take up to 20 seconds.
• Device discovery must be performed when devices are added to the system. In the Alexa
app, navigate to Smart Home. Under Your Devices, select Discover Devices.

Whole House Lighting Controller - LC7001 1308243 REV. C
10
Grouping Discovered Devices
Use the Alexa app to designate groups of Legrand Lighting Control System devices. Groups
allow control of multiple devices using a single Alexa command.
Example: A group named “basement” can have multiple devices located in the basement
assigned to the group for control at one time.
Create a Group
1. Open the Alexa app and select Smart Home.
1. Select Create group.
2. Name the group.
3. Select the devices for control in the group.
4. Save the group.

Whole House Lighting Controller - LC7001 1308243 REV. C
11
Supported Commands
Alexa supports both switching and dimming commands. Switching commands simply activate
and deactivate devices. Dimming commands allow various levels of control to be applied to the
devices.
NOTE: Dimming commands only activate dimmable devices. While all dimmable and non-
dimmable devices in the same group respond to switching commands, only the dimmable
devices can respond to dimming commands.
Common Amazon Alexa commands to turn devices ON or OFF
(choose one word from each bracketed item in the statement):
• “Alexa, turn [my/the] [device/group name] [on/off]”
• “Alexa, turn [on/off] [my/the] [device/group name]”
• “Alexa, set [my/the] [device/group name] to [on/off]”
Common Amazon Alexa commands to brighten or dim devices
(choose one word from each bracketed item in the statement):
• Dimming or brightening to a specic level:
-“Alexa, brighten [my/the] [device/group name] to [1-100%]”
-“Alexa, dim [my/the] [dethatvice/group name] to [1-100%]”
-“Alexa, set [my/the] [device/group name] to [1-100%]”
• General dimming or brightening commands:
-Commanding “Alexa, [dim/brighten] my [device]” results in an adjustment level of 25%
for dimmable devices.
-Commanding “Alexa, [dim/brighten] my [group name]” results in an adjustment level of
25% for only the dimmable devices in the group.

Whole House Lighting Controller - LC7001 1308243 REV. C
12
Google Home Voice Control Integration*
*Google, Google Home, and all related logos are trademarks of Google, Inc. or its afliates.
Prerequisites
Users enabling voice control of the Legrand Lighting Control System through Google Home
require the following:
• a Google Home device
• the Legrand Whole House Lighting Controller (LC7001)
• the latest version of the Google Home app
• the latest version of the Google app (Android only)
• a Google account
• an Internet connection
• the Legrand Lighting Control app, version 2.0 or newer
• an active Samsung ARTIK™ Cloud account integrated with the user’s Legrand Whole
House Lighting Controller (LC7001).
NOTE: For instruction on creating and integrating a Samsung ARTIK Cloud account with the
LC7001, refer to “Setting up Remote Access” in the Legrand Whole House Lighting Controller
User Guide or navigate to <Settings <Remote Access Info <Remote Access Setup in the
Legrand Lighting Control app.
Connecting Google Home to the Legrand Lighting Control
System
1. Select to open the Google Home app.
2. Choose Menu at the top left corner of the
Home screen.
3. Verify that the Google Account shown is linked to
Google Home.
NOTE: To switch accounts, select to the right of
the incorrect account name. Options appear for a
different account selection.
4. Select Home control.
5. Select the Devices tab.
6. Choose Add at the bottom right of the screen.

Whole House Lighting Controller - LC7001 1308243 REV. C
13
7. Choose Samsung ARTIK Cloud.
8. Follow the steps to grant permission to the user’s
Samsung ARTIK Cloud account to integrate with
Google Home.
9. After receiving a successful integration message,
tap Got It.

Whole House Lighting Controller - LC7001 1308243 REV. C
14
Assigning Devices
Google Home supports the control of Legrand Lighting
Control System devices, and other enabled devices,
with a single voice command using the ROOMS tab.
For details on setting up rooms, follow Step 4 of the
instructions on the Google support site at: https://support.
google.com/googlehome/answer/7072090?hl=en.
Supported Commands
Use the following supported control commands to change the light level for your controlled devices.
To turn a light ON/OFF
Ok Google, turn on < light/room name >
Dim a light
(Results in an adjustment level of 45% for dimmable devices)
Ok Google, dim the < light/room name >
Dim/Brighten lights to a certain percentage
Ok Google, dim/brighten < light/room name > to 50%
Set a light brightness to a certain percentage
Ok Google, set < light/room name > to 50%
Brighten a light
(Results in an adjustment level of 45% for dimmable devices)
Ok Google, brighten the < light/room name >
Turn ON/OFF all the lights
Ok Google, turn < on/off > everything

Whole House Lighting Controller - LC7001 1308243 REV. C
15
Legrand Lighting Control App Functionality
This section details how to add and control system components and explains how to create,
delete, and automate lighting scenes.
System Discovery
The system discovery process initiates when opening the Legrand
Lighting Control app for the rst time. System discovery adds
devices to the LC7001 by wirelessly discovering a lighting device
in the home after it is touched. A prompt appears to begin adding
devices.
NOTE: All RF lighting devices must be properly house and group
bounded prior to the installation of the LC7001. Reference the
individual device instructions for information on this process.
Add a lighting device
1. Tap a device to discover it on the system.
2. Name the device.
3. Repeat for each Legrand lighting device being added to the
LC7001.
NOTE: Learn about adding devices after the initial discovery
phase.

Whole House Lighting Controller - LC7001 1308243 REV. C
16
Using the Legrand Lighting Control App
After system discovery is complete, a dashboard
screen appears. The dashboard provides access to
various functions within the app.
• Turn All Lights ON or OFF
• View Recent and Upcoming Scenes
• Go to the Lights page
• Go to the Scenes page
• Go to Settings
Turn All Lights ON or OFF
Tap Turn All Lights On to collectively turn all of your lighting devices ON at the same time
when they are OFF. The button reads Turn All Lights Off to turn your lighting devices OFF
when they are ON.
• Press and hold Turn All Lights On to gradually increase the brightness of all of your
lighting devices to full brightness.
• With the lighting devices ON, swipe left and right to increase and lower the brightness of all
of your devices at once.
View Recent and Upcoming Scenes
• Recent Scenes : Choose to view recent scenes triggered on the system.
• Upcoming Scenes : Choose to view upcoming scenes set to occur within two days.
Go to the Lights page
Select at the bottom of the dashboard screen.
The Lights page appears, displaying the names of all
controllable lighting devices within the system. This screen
shows the following options:
• : status of each lighting device (blue indicates ON).
• : current brightness level.

Whole House Lighting Controller - LC7001 1308243 REV. C
17
Besides providing an overall view of the lighting devices
connected to the system, the Lights page allows you to edit,
add, remove, and control individual settings for each device.
• Edit : Tap edit to:
-change the name of a device.
-select to remove a device from the system.
• + : Tap [+] to add a new device to the LC7001.
Similar to the system discovery process, when selecting
+ , a prompt appears requesting that you tap the lighting
device to be added. Once tapped, the device becomes
part of the system and a prompt appears to name the
device.
• Name of Device : Tap the name of a specic lighting
device to display the individual lighting page for that device.
From the individual lighting page, the following options are available:
-Toggle the device ON and OFF.
-Turn the device ON and OFF by double-tapping.
-Edit Change the name of a device or remove it from the system.
-Adjust the brightness level.
NOTES:
• The LC7001 supports up to 100 devices.
• Sliders are visible for dimmer switches only.
• Dimmers are adjustable when the device is OFF in the app.
Making changes to the slider level does not change the device
status; it changes the brightness level for the next time the
device is turned ON. For immediate changes, use to turn
the device ON before making any slider adjustments.

Whole House Lighting Controller - LC7001 1308243 REV. C
18
Go to the Scenes page
Select at the bottom of the dashboard
screen. The Scenes page appears. This screen
allows you to program individual or multiple
lighting devices to turn ON, OFF, and/or dim on a
customized schedule.
Add a Scene
1. Tap + .
2. Name the scene.
3. Press Save .
4. Select Repeat .
On the Repeat pop-up box, select how often
the scene runs:
• Never : scene is triggered manually.
• Once : scene automatically runs one time.
• Weekly : scene repeats weekly based on the
day(s) and time dened.

Whole House Lighting Controller - LC7001 1308243 REV. C
19
5. Select Date .
On the Date pop-up box, scroll through the
months, days, and years to set the date for the
scene to trigger.
If choosing the Weekly Repeat option,
the Date eld reads Days so you can
choose the days of the week that
the scene triggers.
6. Press <Repeat to return to the Repeat
pop-up box.
7. Select Time .
On the Time pop-up box, choose an option
to set the time the scene triggers:
Time
option:
Specic Relative
Scroll to
choose:
Hour Number of minutes
Minute Before/At/After
AM or PM Sunrise or Sunset
8. Press <Repeat to return to the Repeat pop-up box and see your updated
selections.
9. Press <Add A Scene to return to the scene creation screen.

Whole House Lighting Controller - LC7001 1308243 REV. C
20
10.Place a check mark next to the devices
participating in the scene by tapping next
to each name of the lighting device
on the Include menu.
To adjust the individual state (ON/OFF)
and the brightness level of a device in the
scene, tap the name of the device.
NOTES:
• Sliders are visible for dimmer switches only.
• When using a dimmer, the slider level can be adjusted when the lighting device is OFF in
the app. Making changes to the slider level does not change the device status; it
changes the brightness level for the next time the device is turned ON. For immediate
changes, use to turn the device ON before making any slider adjustments.
11. Tap Fade Rate .
The higher the number selected, the longer the scene takes to rise or fall to the desired
brightness level when the scene executes.
NOTE: When using a Legrand Scene Controller with a “Toggle Scene ON/OFF” button
assigned, the fade rate applies only when the scene is ON. A second button press turns the
lighting devices ON or OFF at the system default rate. This setting is not adjustable. Learn
about the operation of lighting controllers.
12.Tap Save .
The new scene displays in the “Upcoming Scenes” category on the left side of the
dashboard page.
NOTE: The scene appears in the “Upcoming Scenes” area only if it is scheduled to trigger in
the next two days.