LEGRAND LG-41492 User manual

PEP ecopassport No LGRP-00376-V01.01-EN 20E0290A-EN Page 1 / 5
Product Environmental Profile
CX3Energy Management System
Measurament module
128 av. du Maréchal-de-Lattre-de-Tassigny
87045 Limoges Cedex France
Tel. [phone]
Fax. + 33 (0) 5 5506 8888
Your usual Sales office
www.legrand.com
Legrand’s environmentaL commitments
• Incorporate environmental management into our industrial sites
Of all Legrand sites worldwide, over 85% are ISO 14001-certified (sites belonging to the Group for more than five years).
• Offer our customers environmentally friendly solutions
Develop innovative solutions to help our customers design more energy efficient, better managed and more environmentally friendly
installations.
• Involve the environment in product design and provide informations in compliance with ISO 14025
Reduce the environmental impact of products over their whole life cycle.
Provide our customers with all relevant information (composition, consumption, end of life, etc.).
Products concerned
The environmental data is representative of the following products:
reference Product
Function Measure, during 10 years, current, voltage, active/reactive power and other values, in conformity to IEC/EN
61131-2 standard.
Reference Product
LG-414923
EMS CX3- Measurament module - 1 mod DIN
The company reserves the right to change specifications and designs without notice. All illustrations, descriptions, dimensions and weights in the document are for guidance and
cannot be held binding on the company.
LG-414923
LG-414919 - LG-414920

PEP ecopassport No LGRP-00376-V01.01-EN 20E0290A-EN Page 2 / 5
Product Environmental Profile
CX3Energy Management System
Measurament module
128 av. du Maréchal-de-Lattre-de-Tassigny
87045 Limoges Cedex France
Tel. [phone]
Fax. + 33 (0) 5 5506 8888
Your usual Sales office
www.legrand.com
Total weight of
Reference Product 145 g (with unit packaging)
Plastics as % of weight Metals as % of weight Other as % of weight
Polycarbonate 26,3 % Steel 4,2 % Electronic cards 13,7 %
Polyamide 1,0 % Copper alloys 2,7 % Other electronic components 0,7 %
Aluminium 0,1 % Cables / Electric wires 0,2 %
Packaging as % of weight
Paper / Cardboard 32,8 %
Wood 17,4 %
PET 0,5 %
Polyethylene 0,4 %
Total plastics 27,3 % Total metals 7,0 % Total other and packaging 65,7 %
Estimated recycled material content: 24 % by mass.
constituent materiaLs
This Reference Product contains no substances prohibited by the regulations applicable at the time of its introduction to the market.
It respects the restrictions on use of hazardous substances as defined in the RoHS directive 2011/65/EU.
Plastics as % of weight Metals as % of weight Other as % of weight
Polycarbonate 23,8 % Copper alloys 0,9 % Electronic cards 10,6 %
Polyamide 3,4 % Steel < 0,1 % Cables / Electric wires 4,0 %
Thermoset 2,7 % Other electronic components 0,7 %
Other plastics 0,8 % Packaging as % of weight
Paper / Cardboard 33,9 %
Wood 18,1 %
PET 0,6 %
Polyethylene 0,5 %
Total plastics 30,7 % Total metals 0,9 % Total other and packaging 68,4 %
Estimated recycled material content: 23 % by mass.
Total weight of product
LG-414919 145 g (with unit packaging)
Plastics as % of weight Metals as % of weight Other as % of weight
Polycarbonate 19,7 % Copper alloys 2,1 % Cables / Electric wires 10,1 %
Thermoset 6,7 % Steel < 0,1 % Electronic cardboards 8,7 %
Polyamide 6,3 % Other electronic components 0,6 %
Other plastics 1,9 % Packaging as % of weight
Paper / Cardboard 28,1 %
Wood 14,9 %
PET 0,5 %
Polyethylene 0,4 %
Total plastics 34,6 % Total metals 2,1 % Total other and packaging 63,3 %
Estimated recycled material content: 20 % by mass.
Total weight of product
LG-414920 175 g (with unit packaging)

PEP ecopassport No LGRP-00376-V01.01-EN 20E0290A-EN Page 3 / 5
Product Environmental Profile
CX3Energy Management System
Measurament module
128 av. du Maréchal-de-Lattre-de-Tassigny
87045 Limoges Cedex France
Tel. [phone]
Fax. + 33 (0) 5 5506 8888
Your usual Sales office
www.legrand.com
end of Life
The product end-of-life factors are taken into account during the design phase. Dismantling and sorting of components or materials is
made as easy as possible with a view to recycling or failing that, another form of reuse.
• Recyclability rate of the Reference Product:
Calculated using the method described in technical report IEC/TR 62635, the recyclability rate of the product is estimated at 90 %. This
value is based on data collected from a technological channel operating on an industrial basis. It does not pre-validate the effective use
of this channel for the end of life of this product.
Separated into:
- plastic materials (excluding packaging) : 26 %
- metal materials (excluding packaging) : 7 %
- others (excluding packaging) : : 8 %
- packaging (all types of materials) : 49 %
• Recyclability rate of the product LG-414919:
Calculated using the method described in technical report IEC/TR 62635, the recyclability rate of the product is estimated at 86 %. This
value is based on data collected from a technological channel operating on an industrial basis. It does not pre-validate the effective use
of this channel for the end of life of this product.
Separated into:
- plastic materials (excluding packaging) : 26 %
- metal materials (excluding packaging) : 1 %
- others (excluding packaging) : : 8 %
- packaging (all types of materials) : 51 %
manufacture
This Reference Product comes from sites that have received ISO14001 certification.
distribution
Products are distributed from logistics centres located with a view to optimize transport efficiency. The Reference Product is therefore
transported over an average distance of 780 km by road from our warehouse to the local point of distribution into the European market.
Packaging is compliant with european directive 2004/12/EU concerning packaging and packaging waste. At their end of life, its recyclability
rate is 96 % (in % of packaging weight).
instaLLation
For the installation of the product, only standard tools are needed.
use
Under normal conditions of use, this product requires no servicing, no maintenance or additional products.

PEP ecopassport No LGRP-00376-V01.01-EN 20E0290A-EN Page 4 / 5
Product Environmental Profile
CX3Energy Management System
Measurament module
128 av. du Maréchal-de-Lattre-de-Tassigny
87045 Limoges Cedex France
Tel. [phone]
Fax. + 33 (0) 5 5506 8888
Your usual Sales office
www.legrand.com
Manufacture Materials and components of the product, all transport for the manufacturing, the packaging and the waste generated
by the manufacturing.
Distribution Transport between the last Group distribution centre and an average delivery point in the sales area.
Installation The end of life of the packaging.
Use • Product category: active product.
• Use scenario: ten-year working life. Active mode power: 0,4 W for 100 % of the time.
This modelling duration does not constitute a minimum durability requirement.
• Energy model: Electricity mix, Europe 27 - 2002.
End of life The default end of life scenario maximizing the impacts.
Software and
database used EIME V5 and its database «CODDE-2015-04»
environmentaL imPacts
The evaluation of environmental impacts examines the stages of the Reference Product life cycle: manufacturing, distribution,
installation, use and end-of-life. It is representative from products marketed and used in Europe, in compliance with the local current
standards.
For each phase, the following modelling elements were taken in account:
• Recyclability rate of the product LG-414920:
Calculated using the method described in technical report IEC/TR 62635, the recyclability rate of the product is estimated at 78 %. This
value is based on data collected from a technological channel operating on an industrial basis. It does not pre-validate the effective use
of this channel for the end of life of this product.
Separated into:
- plastic materials (excluding packaging) : 25 %
- metal materials (excluding packaging) : 2 %
- others (excluding packaging) : : 9 %
- packaging (all types of materials) : 42 %

PEP ecopassport No LGRP-00376-V01.01-EN 20E0290A-EN Page 5 / 5
Product Environmental Profile
CX3Energy Management System
Measurament module
128 av. du Maréchal-de-Lattre-de-Tassigny
87045 Limoges Cedex France
Tel. [phone]
Fax. + 33 (0) 5 5506 8888
Your usual Sales office
www.legrand.com
Registration N°: LGRP-00376-V01.01-EN Drafting rules: «PEP-PCR-ed3-EN-2015 04 02»
Supplemented by «PSR-0005-ed2-2016 03 29»
Verifier accreditation N°: VH02 Information and reference documents : www.pep-ecopassport.org
Date of issue: 02-2017 Validity period: 5 years
Independent verification of the declaration and data, in compliance with ISO 14025:2010
Internal External
The PCR review was conducted by a panel of experts chaired by Philippe Osset (SOLINNEN)
The elements of the present PEP cannot be compared with elements from another program
Document in compliance with ISO 14025 : 2010: «Environmental labels and declarations. Type III environmental
declarations»
Environmental data in alignment with EN 15804 : 2012 + A1 : 2013
seLection of environmentaL imPacts
The values of the 27 impacts defined in the PCR-ed3-EN-2015 04 02 are available in the digital database of pep-ecopassport.org website.
Total for Life cycle
Raw
material and
manufacture Distribution Installation Use End of life
Global warming 2.26E+01 kgCO2 eq. 2.36E+00 10% 5.63E-03 < 1% 4.44E-03 < 1% 2.02E+01 89% 8.03E-03 < 1%
Ozone depletion 5.57E-06 kgCFC-11 eq. 6.51E-07 12% 1.14E-11 < 1% 2.74E-11 < 1% 4.92E-06 88% 1.92E-10 < 1%
Acidication of soils
and water 1.56E-01 kgSO2 eq. 3.07E-03 2% 2.53E-05 < 1% 2.11E-05 < 1% 1.53E-01 98% 3.09E-05 < 1%
Water eutrophication 6.65E-03 kg(PO4)3- eq. 8.53E-04 13% 5.81E-06 < 1% 1.79E-05 < 1% 5.74E-03 86% 3.67E-05 < 1%
Photochemical ozone
formation 7.60E-03 kgC2H4 eq. 3.63E-04 5% 1.80E-06 < 1% 1.49E-06 < 1% 7.23E-03 95% 2.40E-06 < 1%
Depletion of abiotic
resources - elements 6.00E-04 kgSb eq. 5.99E-04 100% 2.25E-10 < 1% 1.92E-10 < 1% 9.22E-07 < 1% 5.02E-10 < 1%
Total use
of primary energy 3.86E+02 mJ 3.67E+01 10% 7.55E-02 < 1% 5.83E-02 < 1% 3.49E+02 90% 8.60E-02 < 1%
Net use
of fresh water 7.46E-02 m32.18E-02 29% 5.04E-07 < 1% 1.20E-06 < 1% 5.28E-02 71% 6.66E-06 < 1%
Depletion of abiotic
resources - fossil
fuels
2.30E+02 mJ 2.13E+01 9% 7.91E-02 < 1% 6.20E-02 < 1% 2.08E+02 91% 1.14E-01 < 1%
Water pollution 1.27E+03 m34.16E+02 33% 9.26E-01 < 1% 6.92E-01 < 1% 8.49E+02 67% 9.27E-01 < 1%
Air pollution 1.06E+03 m31.88E+02 18% 2.31E-01 < 1% 4.51E-01 < 1% 8.68E+02 82% 9.11E-01 < 1%
For products covered by the PEP other than the Reference Product, the environmental impacts of each phase of the lifecycle are calculated by
multiplying those of Reference Product for these coefficients:
Product Total Manufacturing Distribution Installation Use End of Life
LG-414919 1,0 0,9 1,2 1,0 1,1 0,9
LG-414920 1,1 1,0 1,2 1,0 1,1 1,3
LG-414923 1,0 1,0 1,0 1,0 1,0 1,0