LEGRAND 412015 User manual

83 mm
17.7 mm
Connected energy meter
4 120 15
LE12267AB
Composition
Imperative security precaution
Failure to strictly comply with the installation and use conditions
may result in risk of electric shock or fire.
Requires the installation of a :
Connected Starter Pack
"... with Netatmo"
Gateway module
OR
Connected energy meter
F
72A MAX
2,4 à
2,4835Ghz
<100 mW
+5°C
+45°C
100-240V~
50 / 60Hz
UI
measure
+/-1%
under 63A
kWh
Ø10.2 mm
Measure coil
Cable lenght: 800mm
Ø26.45 mm
+
Accuracy
kWh
Measure
T
Global
CE Directive
Compliant with the following European directive:
Low voltage directive
(LVD) 2014/35/UE
Electromagnetic compatibility
(CEM) n° 2014/30/UE
Imax=72A AC
Pay attention to the direction of the current

2
Wiring
8mm
Preparation, connexion
1
OFF
Turn off the power
at general
circuit breaker
3.5 mm
A circuit breaker for the Energy meter is necessary
MAX
2x 1.5mm²
1.5mm²
V1, N:
0.5Nm
N (neutral) = blue L (Line) = Everything but blue and green/yellow
Connection
of the power supply
Connection
of the power supply
Direction of the
current indicated
on the coil
V1
L
N
N
LN
NL
4 120 15
Measure coil
*: Do not use on a three Lines electrical installation.
*

Add the in a connected installation Energy meter
OU
Press and hold the Gateway module settings button ,or in the center of the
General Scenario Wireless Command until the LED turns green,
then release the button.
3
Complete the installation
2
3
4
OU
>30s
>3s >3s
<1s
<1s
OFF ON
Turn on the power at the
general circuit breaker
once the installation
completed and controlled
Turn off the power at
general circuit breaker
The configuration LEDs of " ... with Netatmo " devices must all light up in fixed green.
Briefly press the setting button on
the Gateway module (or in the center of the
General Scenario Wireless Command)
to finalize the installation.
All devices LED go OFF.
Legrand Home + Control
Finalize the installation in the Legrand Home + Control app
To add this connected product and peripheral items in your
connected installation, you must follow the instructions:
- with Legrand Home + Control app
(Parameters/Add new product)
- or consult the guides and instructions sheets on legrand.fr
5

4
EU SIMPLIFIED DECLARATION OF CONFORMITY
The undersigned,
Legrand
declares that the radio equipment listed on this instruction sheet
are compliant to the directive 2014/53/UE.
The full text of the EU declaration of conformity
is available at the following website:
www.legrandoc.com
LEGRAND - Pro and Consumer Service - BP 30076
87002 LIMOGES CEDEX FRANCE • www.legrand.com
www.legrand.fr/reference/412015
Press the button for more than 5 seconds
configuration of the Energy meter until
the configuration indicator lights up solid red.
It is no longer associated with the Gateway module
/ Control socket.
>5s
Reset an Energy meter
to remove it from a connected installation