LEGRAND Mallia 2810 91 User manual

Mallia™ 2810 91 2812 91 2814 91 2816 91
●Time Delay Switch
N 63174A
Utilization
Important: If the wiring diagrams are not strictly followed, or if the values shown in the table are
exceeded (voltage, power, temperature, frequency), or if the power is too low and causes
the light to blink, the switch would be severely damaged.
Min
Max
25W
1000W
25W
1000W
NO NO NO NO NO NO
➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇
1. Incandescent lamps
2. 230V Halogen lamps
3. Fluorescent lamps ø26mm or ø38mm (forbidden)
4. Halogen lamps with electronic ballast (forbidden)
5. Motors (forbidden)
6. Halogen lamps with ferromagnetic transformer (forbidden)
7. Ferromagnetic transformer (forbidden)
8. Additional radiators (forbidden)
N.B: These values to be reduced by 20% per
 temperaturebandof10℃above25℃.

N 63174A
Wiring
Pre-setting
Operation
· Delay time adjusting range: 5 min to 12 h
· Delay time setting (Removing plate and cover first)
For example:
*
Setting delay time: 5min to 1h, increase/decrease 5min by 5min
1h to 12h, increase/decrease 15min by 15min
<1sec, Switch ON/OFF >1sec, Increase delay-time
Save the Setting
result.
Increase
delay-time*
Decrease
delay-time*
DELAY OFF 10:00
15:00
5:00
5:00
OFF
5:00
OFF
12:00
1:00
5:00
12h
1h
5min
15min by 15min
5min by 5min
Important: If the wiring and installation do not comply with the above instructions, all damages to the
product or other devices will be excluded from warranty.