LEGRAND 430 557 User manual

Manuale di istruzioni
User manual
430 558 - 430 559
USER MANUAL
430 557
LE03714AA
• 4/8/16-camera 500 GB LAN recorder with centralized management on PC
430 557/558/559

Product Informations ............................................................................... 3
Features ................................................................................................................. 4
System design ................................................................................................................. 4
General specifications ....................................................................................................... 5
Front case button description - 391509 ............................................................................. 6
Rear panel I/O description - 391509.................................................................................. 6
Front case button description - 391510 - 391511 .............................................................. 7
Rear panel I/O description - 391510 - 391511 .................................................................. 7
Remote controller button description................................................................................. 8
Installation .............................................................................................. 9
System setup ................................................................................................................. 10
Power on/off ................................................................................................................. 10
Screen display ................................................................................................................. 11
Before setting up system................................................................................................... 12
System login ................................................................................................................. 15
Setting up screen display [M1.1] ....................................................................................... 16
Camera setup [M1.2]......................................................................................................... 20
Record setup [M1.3] .......................................................................................................... 24
Event setup [M1.4]............................................................................................................. 29
Storage [M1.5] ................................................................................................................. 33
Network [M1.6] ................................................................................................................. 34
System [M1.7] ................................................................................................................. 39
Basic product operation .......................................................................... 43
Mode (screen setup).......................................................................................................... 44
Sequence (function) [M6.2] [F5] [RC21]............................................................................ 48
PTZ (function) [M6.1]......................................................................................................... 49
SPOT (function) only 8/16CH [M6.2] ................................................................................. 50
Audio (function) [M6.3] ...................................................................................................... 51
Low view (function) [M6.4]................................................................................................. 51
Remote controller ID.......................................................................................................... 52
Search - Back-up - Record....................................................................... 53
Search ................................................................................................................. 54
Backup ................................................................................................................. 56
CMS Software ........................................................................................... 62
General specifications ............................................................................. 63
Web user .............................................................................................. 64
TABLE OF CONTENTS
2

PRODUCT INFORMATIONS
Glossary
PTZ : Pan / Tilt / Zoom
PIP : Picture in Picture
Water Mark : recording files with watermarking applied can be checked to verify they
would not have been altered or edited.
3

PRODUCT INFORMATION
Features•
Enable integrated video monitoring and system management by networking with maximum 256 DVRs•
systems through CMS (Central Monitoring System) interface.
HighqualityvideodisplayandsystemstabilitythroughembeddedoperatingsystemwithhardwareMPEG4video•
compression chip.
Support the max D1(720*480) quality resolution video display and 480FPS recording.•
Up to 4/8/16 CH video input and up to 16 CH audio input.•
500/1000 Go hard disk drive•
X-Triplex multitasking for video recording, playback, transmission and backup.•
Easy operation using remote-controller, full-page panel, GUI support.•
Network transmission of 30 different types of system error management information per system.•
High-speed network video monitoring by internet explorer through WEB CMS server within the system.•
System Design•
Watchdog function for hardware & software error.•
Robust design for physical impact and temperature.•
Application of low power and low heat features for industrial environment.•
Safety instructions
This product should be installed by a qualified electrician. Incorrect installation and use can entail risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account of the product’s specific mounting location.
Do not open up the device. All Legrand roducts must be opened and repaired only by personnel trained and approved by
Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarentees.
Only use genuine Lagrand accessories.
4

General specifications•
Advanced hardware MPEG 4•
Embedded O/S ROM•
Up to 16 Camera input 4/8/16•
Auto-sequence screen division and PIP/POP function•
Real time display•
Recording : PAL•
4 CH audio recording and two way audio communication•
CD, DVD RW, USB external saving devices•
Ethernet 10/100Mbps, RS-232C network support•
Maximum 16 ports sensor input and 4 port alarm output•
X-plex multitasking, recording, playback, backup and network•
STATIC, DHCP, PPPOE support•
Remote upgrade using CMS•
Free alarm (max 30 secs), port alarm (max 120 secs) recording•
Watermarking•
Private backup viewer•
E-Map’s layout mapping•
5

391511
division button
Play backward button
Stop button
Play forward button
Pause button
1ch,4ch division button
Search button
Searches saved data
Stops playback and converts to surveillance mode
Pause and playback the image
Menu button
Move button
Shows the menu, moves to upper menus and
complete setup
Moves to setup and menu. Operates PTZ camera
Setup Status, PTZ, Audio, Backup, Log view
Function button
Max. x 128 play forward.
Frame by frame play forward on playback
USB Port:2 PORT
USB port for use the
USB memory backup
and USB update
Max. x 128 play backward .
Frame by frame play backward on data playback
CD-ROM
PTZ. button
Operates Pan/Tilt camera
Rec . button
Records images
Numeric buttons
LED Indicator
Indicate present system status information
ETHERNET:
Port for Cross cable
( Possible to Remote
Surveillance.)
VIDEO IN
Input video by
BNC 4PORT
LOOP OUT
Output video :
BNC 4Port
(75ΩAUTO)
VIDEO OUT
Output video
through AV
Monitor
S-VIDEO
Output video
through S-VIDEO
comport
AUDIO IN
Input audio
by 4 Port
AUDIO OUT
Output audio
by 1 Port
POWER
System Power On/Off
VGA
Output Video to a Computer
Monitor by Connected
ALARM/SENSOR/RS-485
Connect Port for Sensor (4Port), Alarm (4Port)
COM(1Port), RS-485 (2Port), GND(1Port)
Enter Button
F1
F2
F2
F3
F13
F8
F9
F10
F11
F14
F12
F15
F6
F16
F17 F17
F7
R2
R11R4
R3
230 V 50 Hz
R5
R8
R10
R13
R1
R12
Front case button description•
391509
Rear Panel I/O description•
391509
6

division button
Search button
Rec
.
button
Menu button
Move button
USB Port:
2 PORT
Records images
Shows the menu, moves to upper menus and complete setup
Moves to setup and menu. Operates PTZ camera
Numeric buttons
Applies setup details and select ch
annel
Searches saved data
LED Indicator
SEQ. button
SPOT button
Setup SPOT monitor
PTZ. button
Play backward button
Stop button
Play forward button
Max. x 128 play forward.
Frame by frame play forward on playback
Stops playback and converts to surveillance mode
Max. x 128 play backward .
frame by frame play backward on data playback
Division rotating surveillance button
Operates Pan/Tilt camera
Setup Status, Audio, Backup, P/T/Z, SEQ, Log list
Function button
Indicate present system status information
Pause and playback the image
Pause button
1ch,4ch,9ch,16ch division button
POWER
Power switch On/Off
VIDEO IN : BNC 16PORT
LOOP OUT (75 ON/OFF)
AUDIO IN : 16 PORT
ALARM/SENSOR/RS-485
Connect Port for Sensor (16Port), Alarm (4Port)
COM(1Port), RS-485 (2Port), GND(1Port)
VIDEO OUT
Output video
through AV Monitor
S-VIDEO
Output video through
S-VIDEO comport
AUDIO OUT
Out put audio
by 1 port
VGA
Output Video to a Computer
Monitor by Connected
ETHERNET:
Port for Cross cable.
( Possible to Remote Surveillance.)
USB
USB port for use the USB memory backup
and USB update.
NTSC/PAL
Select switch.
F2
F3
F4
F5 F6
F7
F8
F9
F10
F13
F12
F14
F18
F15
F16
F1
F17
R1
R2 R3 R4
R5
R6
R8
R9
R10
R11
R12
R13
Enter button
SPOT OUT
Front case button description•
391511
Rear Panel I/O description•
391511
7

Remote controller button description•
391509 - 391510 - 391511
8

INSTALLATION
9

POWER ON/OFF•
SYSTEM SET UP
switch
[R5]
O (O) /1 (On)
Power on•
Connect the power cable then press the power switch [R5] to be “ON”.
Power off•
Select “SHUTDOWN” [M1.7.7].
Select “ENTER/OK” button after the message “ System will shutdown ! ”.
Press the power switch [R5] to be off.
10

SCREEN DISPLAY•
11

BEFORE SETTING UP SYSTEM•
Input password
Select the “LOGIN ID” and input the corresponding password using number buttons – [F18] or [RC3] or•
KeyPad - at the password box.
How to use Menu
Move menu cursor using arrow buttons [F8] or [RC10].•
Press “ENTER/OK” button –[F9] or [RC11]- or click to activate the selected menu or to go to sub menu.•
Press “MENU” button -[F7] or [RC5]- or use right click to close system setup or go to the previous menu.•
Saving/Canceling menu setup
Saving menu setup : click on “OK” or select “OK” button then press “ENTER/OK” button [F9] or [RC11].•
Canceling menu setup : click on “CANCEL” or select “CANCEL” then press “ENTER/OK” buttons -[F9] or•
[RC11]- or right click.
12

Text input box
Click on letters or select letters/symbols using arrow buttons -[F8] or [RC10]- then press “ENTER/OK” button•
-[F9] or [RC11]- ; the selected letters/symbols will appear on the top text box.
“CAP” is used to toggle keyboard upper/lower case.
Moving to the next menu page
Press or button to move to the next menu page when
part of the items are shown on one page.
1 ~ 8 9 ~ 16
13

Menu can be reached by pressing « MENU » button -[F7] or [RC5]- then using move buttons -[F8] or [RC10]-
and enter button [F9] or [RC11] .
It can also be reached by click if a mouse is plugged on USB port.
MENU
SETUP
RECORD [M2]
SEARCH [M3]
BACKUP [M4]
OSD [M5]
LOG VIEW [M6.4]
Log Out [M7]
DISPLAY CAMERA RECORD EVENT STORAGE NETWORK SYSTEM
OSD [M1.1.1]
LIVE-SEQ(FULL)
LIVE-SEQ(QUAD) *
SPOT-SEQ(FULL) *
SPOT-SEQ(QUAD) *
MISC [M1.1.6]
GENERAL
PTZ [M1.2.2]
PRESET
TOUR
COLOUR
POSITION
PROPERTY
SCHEDULE
MISC [M1.3.3]
MOTION
SENSOR
VLOSS
E-MAIL
MISC[M1.4.5]
SETUP
DDNS
CLIENT
ACCESSLIST
SERVER
CONFIG
TIME
SOFTWARE
MISC
USER
SHUTDOWN
HDD FORMAT
AUTO-BACKUP
by event
by calender
goto first
goto last
by time
FUNCTION [M6]
PTZ [M6.1]
SEQUENCE [M6.2]
AUDIO [M6.3]
[M1.1] [M1.2] [M1.3] [M1.4] [M1.5] [M1.6] [M1.7]
* Only for 8/16 CH
Menu Tree Structure
14

SYSTEM LOGIN•
Starting system menu
Press “MENU” button – [F7] or [RC5] - or click on “MENU”.
Input administrator’s password on the password box.
¢— The default “ADMIN” value is 0000.
(“SETUP” rights are required. They are granted to Administrator.
They can be granted to other users (cf. [M1.7.5]).
15

SETTING UP SCREEN DISPLAY [M1.1]•
Status name the name of each camera (cf M1.2.1) is displayed and recorded (ON/OFF)•
Camera number the number of each channel is displayed (ON/OFF)•
Camera boarder boarder-line of each channel appeared (ON/OFF)•
Language – select menu language.•
TV VGA
Left margin – adjust the left margin of OSD. 30 00•
Right margin – adjust the right margin of OSD 00 00•
Top margin – adjust the top margin of OSD 10 00•
Bottom margin - adjust the bottom margin of OSD 20 00•
Screen display setup – On Screen Display (OSD) [M1.1.1]
Left
margin
Bottom margin
Top margin
Right
margin
16

Screen display setup – live sequence scanning (full screen) [M1.1.2]
Setup duration time for live sequence scanning in full screen.
maximum input : 99 seconds
Screen display setup – live sequence scanning (quad screen) (only for 8/16 CH pro-
ducts) [M1.1.3]
Setup duration time for live sequence scanning in quad screen.
maximum input : 99 seconds
Quad screen number camera
1 Camera 1 ~ Camera 4
2 Camera 5 ~ Camera 8
3 Camera 6 ~ Camera 9
[NS-5009] <réf. BTicino>
Quad screen number camera
1 Camera 1 ~ Camera 4
2 Camera 5 ~ Camera 8
3 Camera 9 ~ Camera 12
4 Camera 13~ Camera 16
[NS-5016] <réf. BTicino>
RENVOI p19
17

Screen display setup – spot sequence scanning (full screen) _
(only for 8ch/16ch products)
Setup duration time for spot sequence scanning in full screen (maximum 99 s).
Screen display setup – spot sequence scanning (quad screen) [M1.1.5]
Setup duration time for spot sequence scanning in quad screen (maximum 99 s)
Quad screen number camera
1 Camera 1 ~ Camera 4
2 Camera 5 ~ Camera 8
3 Camera 6 ~ Camera 9
[NS-5009] <réf. BTicino>
Quad screen number camera
1 Camera 1 ~ Camera 4
2 Camera 5 ~ Camera 8
3 Camera 9 ~ Camera 12
4 Camera 13~ Camera 16
[NS-5016] <réf. BTicino>
18

Screen display setup – miscellaneous [M1.1.6]
Deinterlace (on/off)
prevent screen twittering during playback of image which is recorded in low frame
rate and 720X480 or 720X576 resolution.
VGA resolution
600 x 800 / 1024 x 768 / 1280 x 1024
Video type
Auto Detect / jumper / NTSC / PAL
Keep PAL video type
19

Camera setup – general [M1.2.1] [M1.1.4]
TITLE : input camera/channel (CH) names. It can be displayed (or not) on the monitor (cf M1.1.1).
COVERT : show or hide channels (ON/OFF)
AUDIO : select connected audio channels [R3].
Camera setup – PTZ (Pan/Tilt/Zoom) [M1.2.2]
ID : input ID of the camera connected
PROTOCOL : select the registered protocol (NONE / PELCO_D / PELCO_P / SCC641 / SK2141 / CNB102 /
ADTECH / 1S-CD51M / Chubb_ISD / COP1 / COP2 / DSC230 / LILIN / CYNIX / NITRO / PTC-400C / Tele Eve / …)
BAUD : select the registered baud (1200 / 2400 / 4800 / 9600 / 19200 / 38400 / 11520)
CAMERA SETUP [M1.2]•
20