Leica DVM6 User manual

ASSEMBLY INSTRUCTIONS FOR
LEICA DVM6 INTERFACE MODULE
This guide does not replace the complete manual provided on the CD.
INCLUDED COMPONENTS:
LEICA DVM6
1
2
3
4
5
6
10450707 interface module
to mount DVM6 to focus column
1
DVM6 focus column adapter
required to align DVM6 optical axis to Leica
TL5000 Ergo base
2
USB cable
to connect interface module to PC
3
4x M3x8 screws
to connect the zoom module with
the interface module
4
4x M5x20 screws
to mount the DVM6 focus
column adapter from underneath
to the standard adapter plate of
the TL5000 Ergo base
5
1x M5x25 screw
to x the interface module to the
focus column
6
10725700 / 04.2016

LEICA DVM6
1
2
LEICA DVM6
LEICA DVM6
LEICA DVM6
Remove
objective
Access the 4
screws from below
to open them
Put stage in lowest
position and turn off
the microscope
Slightly pull out the zoom
module and unplug the
USB and control cable
Mount zoom module on interface module
repeating the procedure backwards:
> Plug in the 2 cable connections
> Make sure the zoom module sits rmly in
place and x the 4 screws
> Connect the USB 3.0 cable between
interface module and PC
LEICA DVM6
1
2
LEICA DVM6
1
3
2
4
5