Lenovo ThinkPad Hard Disk Drive User manual

ThinkPad Hard Disk Drive
User’s Guide

ThinkPad Hard Disk Drive
User’s Guide

Note: Before using this information and the product it supports, read the information
in Appendix A, “Service and Support,” Appendix B, “IBM Statement of Limited
Warranty Z125-4753-08 04/2004,” Appendix C, “Guarantee supplement for Mexico,”
and Appendix D, “Notices.”
Third Edition (March 2005)
©Copyright International Business Machines Corporation 2005. All rights reserved.
US Government Users Restricted Rights –Use, duplication or disclosure restricted by
GSA ADP Schedule Contract with IBM Corp.

Contents
Safety information ....................v
General safety guidelines ................. vii
Service ........................ vii
Power cords and power adapters ............... vii
Extension cords and related devices .............. viii
Plugs and outlets .................... viii
Batteries .......................ix
Heat and product ventilation ................ix
CD and DVD drive safety ..................x
Preface........................xi
Registering your option ..................xi
About your ThinkPad Hard Disk Drive ............ 1-1
Handling the hard disk drive ................ 1-1
Replacing the hard disk drive ................ 1-1
Appendix A. Service and Support .............. A-1
Online technical support ................. A-1
Telephone technical support ................ A-1
Appendix B. IBM Statement of Limited Warranty Z125-4753-08 04/2004 B-1
Part 1-General Terms .................. B-1
Part 2-Country-unique Terms ............... B-5
Part 3-Warranty Information ............... B-18
Warranty Period ................... B-18
Types of Warranty Service ................ B-19
Worldwide telephone list ................ B-20
Appendix C. Guarantee supplement for Mexico ......... C-1
Appendix D. Notices .................. D-1
Trademarks ...................... D-2
Electronic emission notices ................. D-2
Federal Communications Commission (FCC) statement ...... D-2
©Copyright IBM Corp. 2005 iii

iv ThinkPad Hard Disk Drive: User’s Guide

Safety information
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety
Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Lees voordat udit product installeert eerst de veiligheidsvoorschriften.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette
produktet.
©Copyright IBM Corp. 2005 v

Antes de instalar este produto, leia as Informações sobre Segurança.
Antes de instalar este producto lea la información de seguridad.
Läs säkerhetsinformationen innan du installerar den här produkten.
vi ThinkPad Hard Disk Drive: User’s Guide

General safety guidelines
Always observe the following precautions to reduce the risk of injury and
property damage.
Service
Do not attempt to service aproduct yourself unless instructed to do so by the
IBM
® Support Center. Use only an IBM authorized service provider who is
approved to repair your particular product.
Note: Some parts can be upgraded or replaced by the customer. These parts
are referred to as Customer Replaceable Units, or CRUs. IBM expressly
identifies CRUs as such, and provides documentation with instructions when it
is appropriate for customers to replace those parts. You must closely follow all
instructions when performing such replacements. Always make sure that the
power is turned off and that the product is unplugged from any power source
before you attempt the replacement. If you have any questions or concerns,
contact the IBM Support Center.
Power cords and power adapters
Use only the power cords and power adapters supplied by the product
manufacturer.
Never wrap apower cord around the power adapter or other object. Doing so
can stress the cord in ways that can cause the cord to fray, crack or crimp. This
can present asafety hazard.
Always route power cords so that they will not be walked on, tripped over, or
pinched by objects.
Protect the cord and power adapters from liquids. For instance, do not leave
your cord or power adapter near sinks, tubs, toilets, or on floors that are
cleaned with liquid cleansers. Liquids can cause ashort circuit, particularly if
the cord or power adapter has been stressed by misuse. Liquids can also cause
gradual corrosion of the power cord terminals and/or the connector terminals
on the adapter which can eventually result in overheating.
Always connect power cords and signal cables in the correct order and ensure
that all power cord connectors are securely and completely plugged into
receptacles.
©Copyright IBM Corp. 2005 vii

Do not use any power adapter that shows corrosion at the ac input pins
and/or shows signs of overheating (such as deformed plastic) at the ac input
or anywhere on the power adapter.
Do not use any power cords where the electrical contacts on either end show
signs of corrosion or overheating or where the power cord appears to have
been damaged in any way.
Extension cords and related devices
Ensure that extension cords, surge protectors, uninterruptible power supplies,
and power strips that you use are rated to handle the electrical requirements of
the product. Never overload these devices. If power strips are used, the load
should not exceed the power strip input rating. Consult an electrician for more
information if you have questions about power loads, power requirements, and
input ratings.
Plugs and outlets
If areceptacle (power outlet) that you intend to use with your computer
equipment appears to be damaged or corroded, do not use the outlet until it is
replaced by aqualified electrician.
Do not bend or modify the plug. If the plug is damaged, contact the
manufacturer to obtain areplacement.
Some products are equipped with athree-pronged plug. This plug fits only
into agrounded electrical outlet. This is asafety feature. Do not defeat this
safety feature by trying to insert it into anon-grounded outlet. If you cannot
insert the plug into the outlet, contact an electrician for an approved outlet
adapter or to replace the outlet with one that enables this safety feature. Never
overload an electrical outlet. The overall system load should not exceed 80
percent of the branch circuit rating. Consult an electrician for more information
if you have questions about power loads and branch circuit ratings.
Be sure that the power outlet you are using is properly wired, easily accessible,
and located close to the equipment. Do not fully extend power cords in away
that will stress the cords.
Connect and disconnect the equipment from the electrical outlet carefully
viii ThinkPad Hard Disk Drive: User’s Guide

Batteries
All IBM personal computers contain anon-rechargeable coin cell battery to
provide power to the system clock. In addition many mobile products such as
Thinkpad notebook PCs utilize arechargeable battery pack to provide system
power when in portable mode. Batteries supplied by IBM for use with your
product have been tested for compatibility and should only be replaced with
IBM approved parts.
Never attempt to open or service any battery. Do not crush, puncture, or
incinerate batteries or short circuit the metal contacts. Do not expose the
battery to water or other liquids. Only recharge the battery pack strictly
according to instructions included in the product documentation.
Battery abuse or mishandling can cause the battery to overheat, which can
cause gasses or flame to “vent” from the battery pack or coin cell. If your
battery is damaged, or if you notice any discharge from your battery or the
buildup of foreign materials on the battery leads, stop using the battery and
obtain areplacement from the battery manufacturer.
Batteries can degrade when they are left unused for long periods of time. For
some rechargeable batteries (particularly Lithium Ion batteries), leaving a
battery unused in adischarged state could increase the risk of abattery short
circuit, which could shorten the life of the battery and can also pose asafety
hazard. Do not let rechargeable Lithium-Ion batteries completely discharge or
store these batteries in adischarged state.
Heat and product ventilation
Computers generate heat when turned on and when batteries are charging.
Notebook PCs can generate asignificant amount of heat due to their compact
size. Always follow these basic precautions:
vDo not leave the base of your computer in contact with your lap or any part
of your body for an extended period when the computer is functioning or
when the battery is charging. Your computer produces some heat during
normal operation. Extended contact with the body could cause discomfort
or, potentially, askin burn.
vDo not operate your computer or charge the battery near flammable
materials or in explosive environments.
vVentilation slots, fans and/or heat sinks are provided with the product for
safety, comfort, and reliable operation. These features might inadvertently
become blocked by placing the product on abed, sofa, carpet, or other
flexible surface. Never block, cover or disable these features.
General safety guidelines ix

CD and DVD drive safety
CD and DVD drives spin discs at ahigh speed. If aCD or DVD is cracked or
otherwise physically damaged, it is possible for the disc to break apart or even
shatter when the CD drive is in use. To protect against possible injury due to
this situation, and to reduce the risk of damage to your machine, do the
following:
vAlways store CD/DVD discs in their original packaging
vAlways store CD/DVD discs out of direct sunlight and away from direct
heat sources
vRemove CD/DVD discs from the computer when not in use
vDo not bend or flex CD/DVD discs, or force them into the computer or their
packaging
vCheck CD/DVD discs for cracks before each use. Do not use cracked or
damaged discs
xThinkPad Hard Disk Drive: User’s Guide

Preface
You can increase the storage capacity of your ThinkPad
® computer by
replacing the ThinkPad Hard Disk Drive with one of greater capacity.
Your option package contains the following:
vThinkPad Hard Disk Drive
vThinkPad Hard Disk Drive User’s Guide
If any of the items listed above are missing or damaged, contact your place of
purchase. Be sure to retain your proof of purchase; it might be required to
receive warranty service.
Registering your option
Thank you for purchasing this IBM
® product. Please take afew moments to
register your product and provide us with information that will help IBM to
better serve you in the future. Your feedback is valuable to us in developing
products and services that are important to you, as well as in developing better
ways to communicate with you. Register your option on the IBM Web site at
http://www.ibm.com/pc/register/
IBM will send you information and updates on your registered product unless
you indicate on the Web site questionnaire that you do not want to receive
further information.
©Copyright IBM Corp. 2005 xi

xii ThinkPad Hard Disk Drive: User’s Guide

About your ThinkPad Hard Disk Drive
This section provides information on handling and replacing your ThinkPad
Hard Disk Drive.
Handling the hard disk drive
To protect your hard disk drive, observe the following precautions:
vKeep the drive in its static-protective bag until you are ready to install the
drive in your ThinkPad computer. If you must put the drive down, place the
static-protective bag on aflat, padded surface, and place the drive on the
bag with the component side facing up.
vHandle the drive with care. Dropping or jarring the drive can damage the
components inside the drive housing.
vLimit your movement. Movement can cause static electricity buildup.
vDo not subject the drive to physical shocks.
vHandle the drive by the edges.
vDo not touch any exposed components on the drive.
vDo not apply pressure to the cover of the drive.
Attention:
The drive is very sensitive. Incorrect handling can cause damage and
permanent loss of data on the hard disk. Before removing the hard disk
drive, make abackup copy of all the information on the hard disk, and
then turn the computer off. Never remove the drive while the system is
operating, in standby mode, or in hibernation mode.
Replacing the hard disk drive
Replace the hard disk drive only if you upgrade it or have it repaired. The
connectors and bay of the hard disk drive were not designed for frequent
changes or drive swapping.
Note: The following procedure may vary depending on the model of your
ThinkPad computer. For more detailed instructions, refer to your system
documentation.
To replace the hard disk drive, complete the following procedure:
1. Turn off your ThinkPad computer.
2. Disconnect the ac adapter and all cables from the computer.
©Copyright IBM Corp. 2005 1-1

3. Close the display and turn the computer over.
4. Remove the battery.
5. Remove the screw that secures the hard disk drive.
6. Remove the hard disk drive by pulling the cover away from the computer.
7. Remove the cover of the hard disk drive.
8. Unpack the new hard disk drive.
Attention
Before you unpack the hard disk drive, be sure to read “Handling
the hard disk drive” on page 1-1.
9. Attach the cover to the new hard disk drive.
10. Insert the hard disk drive and its cover into the hard disk drive bay; then
firmly install them. Make sure the label on the hard disk drive is facing
the top of the computer.
11. Reinstall the screw.
Note: You can replace the screw with asecurity screw to prevent the hard
disk drive from being easily removed. The security screw may not
be included in your ship group. However, you can purchase screws
directly from NABS at www.nabsnet.com.
12. Reinstall the battery.
13. Connect the ac adapter and cables to the computer.
1-2 ThinkPad Hard Disk Drive: User’s Guide

Sobre a Unidade de Disco Rígido do ThinkPad
Esta seção fornece informações sobre o manuseioeasubstituição da Unidade
de Disco Rígido do ThinkPad.
Manuseando a Unidade de Disco Rígido
Para proteger a unidade de disco rígido, observe as seguintes precauções:
vMantenha a unidade em sua embalagem protetora antiestática até o
momento da instalação da unidade no computador ThinkPad. Se você
precisar abaixar a unidade, coloque a embalagem protetora antiestática sobre
uma superfície plana e revestida e coloque a unidade sobre a embalagem
com o lado do componente voltado para cima.
vManuseie a unidade com cuidado. Derrubar ou sacudir a unidade pode
danificar os componentes dentro de seu compartimento.
vLimite seus movimentos. Eles podem causar acúmulo de eletricidade
estática.
vNão submeta a unidade a choques físicos.
vManuseie a unidade pelas bordas.
vNão encoste em nenhum componente exposto da unidade.
vNão faça pressão na tampa da unidade.
Atenção:
A unidade é muito sensível. O manuseio incorreto pode causar danos e
perda permanente de dados no disco rígido. Antes de remover a unidade
de disco rígido, faça backup de todas as informações do disco rígido e,
em seguida, desligue o computador. Nunca remova a unidade enquanto
o sistema estiver operando, em modo de espera ou modo de hibernação.
Substituindo a Unidade de Disco Rígido
Somente substitua a unidade de disco rígido para fazer o upgrade ou para
consertá-la. Os conectores e o compartimento da unidade de disco rígido não
foram projetados para alterações freqüentes ou troca de unidade.
Nota: O procedimento a seguir pode variar, dependendo do modelo do seu
computador ThinkPad. Para obter instruções mais detalhadas, consulte a
documentação do sistema.
Para substituir a unidade de disco rígido, conclua o seguinte procedimento:
©Copyright IBM Corp. 2003 1-3

1. Desligue o computador ThinkPad.
2. Desconecte o adaptador ac e todos os cabos do computador.
3. Feche a tampa (visor) do computador e vire-o.
4. Remova a bateria.
5. Remova o parafuso que prende a unidade de disco rígido.
6. Remova a unidade de disco rígico, puxando a tampa para fora do
computador.
7. Remova a tampa da unidade de disco rígido.
8. Retire a nova unidade de disco rígido da embalagem.
Atenção
Antes de retirar a unidade de disco rígido da embalagem,
certifique-se de ter lido “Manuseando aUnidade de Disco Rígido”
na página 1-3.
9. Anexe a tampa à nova unidade de disco rígido.
10. Insira a unidade de disco rígido e a tampa no compartimento da unidade
de disco rígido e instale-os com firmeza. Certifique-se de que a etiqueta na
unidade de disco rígido está virada para cima no computador.
11. Reinstale o parafuso.
Nota: Você pode substituir o parafuso com um parafuso de segurança
para evitar que a unidade de disco rígido seja facilmente removida.
O parafuso de segurança pode não estar incluído no seu grupo de
envio. No entanto, você pode comprar parafusos diretamente da
NABS no endereço www.nabsnet.com.
12. Instale novamente a bateria.
13. Conecte o adaptador ac e os cabos ao computador.
1-4ThinkPad HardDisk Drive: User’s Guide

JednotkapevnéhodiskuThinkPad
Tatočástobsahujeinformaceozacházenísjednotkoupevnéhodiskuajejívýměně.
Zach zenísjednotkoupevnéhodisku
Abystejednotkupevnéhodiskunepoškodili,dodržujtenásledujícípokyny:
vPonechejtejednotkuvantistatickémobalu,dokudjinebudeteinstalovatdopočítače
ThinkPad.Potřebujete-lijednotkuodložit,položteantistatickýobalnaplochý
polstrovanýpovrchajednotkupoložtenaobalstranousesoučástkaminahoru.
vZacházejtesjednotkouopatrně.Pádjednotkyneboprudkýnárazmůžepoškodit
součástkyuvnitřjednotky.
vOmeztesvůjpohyb.Pohybmůževytvářetelektrostatickýnáboj.
vNevystavujtejednotkufyzickýmšokům.
vJednotkubertezaokraje.
vNedotýkejtesenezakrytýchsoučástekjednotky.
vNetlačtenapovrchjednotky.
Upozornění:
Jednotkajevelmicitlivá.Nesprávnézacházenímůžezpůsobitpoškozeníatrvalou
ztrátudatnapevnémdisku.Předvyjmutímjednotkypevnéhodiskuzálohujte
všechnadatanapevnémdiskuapakpočítačvypněte.Jednotkupevnéhodisku
nikdynevyjímejte,pokudjepočítačvprovozu,vpohotovostnímrežimunebo
režimuspánku.
Výměnajednotkypevnéhodisku
Jednotkupevnéhodiskuvyměňtepouzetehdy,pokudprovádíteupgrade,nebopřiopravě
jednotky.Konektoryapozicejednotkypevnéhodiskunebylynavrženypročasté
výměnydisku.
Poznámka:UvedenýpostupsemůželišitpodlemodeluvašehopočítačeThinkPad.
Podrobnéinstrukcenaleznetevdokumentacikvašemusystému.
Jednotkupevnéhodiskuvyměnítenásledujícímpostupem:
1. VypnětepočítačThinkPad.
2. Odpojteodpočítačeadaptérnapájeníavšechnykabely.
3. Zavřetedisplejpočítačeapočítačotočte.
4. Vyjmětebaterii.
©CopyrightIBMCorp.20031-5

5. Vyšroubujte šroub, který zajišťuje jednotku pevného disku.
6. Vytáhněte jednotku pevného disku tahem za kryt směrem od počítače.
7. Oddělte kryt od jednotky pevného disku.
8. Vybalte novou jednotku pevného disku.
Upozornění
Předvybalenímjednotkysipřečtětečást“Zacházenísjednotkoupevného
disku”nastránce1-5.
9. Kryt přidělejte k nové jednotce pevného disku.
10. Vložte jednotku pevného disku a její kryt do pozice jednotky pevného disku, pak je
pevně namontujte. Ověřte, že je štítek na jednotce pevného disku otočen směrem
k horní části počítače.
11. Šroub našroubujte zpět.
Poznámka: Šroub lze nahradit bezpečnostním šroubem, který znemožňuje snadné
vyjmutí jednotky pevného disku. Bezpečnostní šroub nemusí být
obsažen ve vaší dodávce. Tento šroub lze však objednat u firmy
NABS na webové stránce www.nabsnet.com.
12. Vložte zpět baterii.
13. Připojte k počítači adaptér napájení a kabely.
1-6 JednotkapevnéhodiskuThinkPad:Uživatelskápříručka