LG Urbane -W150 User manual

ENGLISH
ESPAÑOL
FRANÇAIS
LG-W150
QUICK START GUIDE
www.lg.comPrinted in Korea
MBM65201301 (1.0)

Visit www.lg.com to view the user guide and more information.
• Some contents and illustrations may differ from your device depending
on the region, service provider, software version, or OS version, and are
subject to change without prior notice.
• Always use genuine LG accessories. The supplied items are designed
only for this device and may not be compatible with other devices.
• Available accessories may vary depending on your region, country or
service provider.
ENGLISH

2
Watch layout
Power Key
Warning Do not close or push
the hole located at the bottom of
the device with a sharp object.
Doing so may cause your device to
work improperly.
Cha
r
Befor
e

3
push
m of
c
t.
v
ice to
Charging the watch
• Use the charging cradle provided
with the your watch to charge its
battery.
• Connect the charging cradle to
a power outlet and place the
watch on it. The watch will turn on
automatically.
• To maximize battery life, make sure
that the battery is fully charged
before you use it for the first time.
Before using your watch for the first time, you should charge the battery.
Charging
Terminals

4
Charging the watch
Cautions to be taken regarding the corrosion of charging terminals
Exposing to sweat or other foreign material during the use of the product
may cause corrosion at the terminals while charging it.
To prevent this, wipe the product with a cloth before charging.
Cautions before wearing the leather strap
• The LG Watch Urbane’s stitched leather strap is thick enough to meet
high quality standard. Before wearing the leather strap, please bend it
back and forth a few times. This will help you feel more comfortable when
wearing it.
• Depending on the user's skin condition, the watch may cause unintended
allergic reactions on the skin it's in contact with.
Turn
i
To tur
n
hold t
h
hand s
i
secon
d

5
m
inals
d
uct
e
et
d
it
e
when
e
nded
Turning on the watch Turning off the watch
Press and hold the Power Key
until the apps list appears.
Tap Settings > Power off.
When prompted with the
message Power off: Are you
sure?, tap .
To turn on the watch, press and
hold the Power Key (on the right
hand side of the watch) for a few
seconds.
Power
Key

6
Before pairing, please do the following on the phone or tablet.
Make sure that the Android version on your phone or tablet is Android
4.3 or higher and supports Bluetooth®.
• To find out whether your phone or tablet supports Android Wear,
visit http://g.co/WearCheck from your phone or tablet.
• If your phone or tablet is not Android 4.3, or later, please check with
your manufacturer for a possible software update.
Make sure your phone or tablet is next to your watch.
On your phone or tablet, download the Android Wear app from the
Play Store app and install it. Check that the Android Wear app
is installed and updated to the latest version on your phone or tablet.
Before Pairing
Ma
Yo
u
Ke
e
NOT
E
• De
p
aut
• De
p
ov
e
Bef
o

7
d
roid
e
ar,
k
with
m
the
app
b
let.
Make sure your phone or tablet is connected to mobile data or Wi-Fi.
You need a data connection to set up your watch for the first time.
Keep the watch connected to power during setup.
NOTES:
• Depending on the software installed on your watch, your watch may
automatically download and install an update.
• Depending on the network condition, the setup process might take
over 20 minutes.
Before Pairing

8
How to pair your watch
Turn on the watch and swipe the welcome screen left to begin.
Tap a language.
Connect your watch to a power source and swipe left to continue.
Tip: If the battery is less than 20%, your watch may not move to the
next step.
Swipe left following the onscreen instruction until the watch code is
displayed.
Op
e
Blu
On
wa
t
Yo
u
th
e
Ta
p
Yo
u
ca
n
Fol
l
How

9
.
e
is
Open the Android Wear app on your phone or tablet. Turn
Bluetooth on during setup, if it isn’t already on.
On your phone or tablet, you’ll see a list of nearby devices. Tap your
watch’s code.
You’ll see a pairing code on your phone or tablet and watch. Check that
the codes match.
Tap Pair on your phone or tablet to start pairing.
You’ll see a confirmation message on your watch once it is paired. This
can take a few minutes, so please wait a while.
Follow the onscreen instructions to complete the initial setup.
How to pair your watch

10
Wear your watch on your wrist correctly
before measuring the heart rate.
Heart Rate Sensor
NOTES:
• Loose fitting or too much movement may cause inaccurate measurements.
• Never look directly at the heart rate sensor light as this may damage
your eyesight.
• When heart rate readings are inaccurate, retake your heart rate
measurements by putting your watch on the inside of one of your wrists.
Con
n
If you
w
watch.
Reset
This se
delete
s
Pr
e
Ta
p
Ta
p
• You
r
• Fact
o
com
p
Heart Rate Sensor

11
m
ents.
a
ge
w
rists.
Connecting to another mobile device
If you want to connect your watch to another device, you must reset your
watch.
Reset your watch
This setting resets your watch’s settings to their factory default values and
deletes all of your data.
Press and hold the Power Key until the apps list appears.
Tap Settings > Factory reset. You are prompted to confirm.
Tap .
• Your watch connects to one mobile device at a time.
• Factory reset erases all data from your watch's memory. After
completion, it is ready to connect to another mobile device.

12
Safety information
Before turning on your product, review the basic safety information
provided here.
General safety & handling
While using your product, be aware of the following common-sense
guidelines.
Your environment
• Safe operating temperatures. Use and store your product in
temperatures between 0°C/32°F and 40°C/104°F. Exposing your
product to extremely low or high temperatures may result in damage,
malfunction, or even explosion.
• While driving. When driving a car, driving is your first responsibility. Using
a mobile device or accessory for a call or other application while driving
may cause distraction. Keep your eyes on the road.
• Aro
u
mig
h
• On
a
devi
c
take
o
devi
c
mag
n
and
m
item
not
s
wan
d
• Alw
a
off i
n
dan
g
• Cha
n
con
n

13
g
e,
Using
v
ing
• Around explosives. Do not use in areas where sparks from the product
might cause a fire or explosion.
• On airplanes. Observe all rules and instructions for use of electronic
devices. Most airlines allow electronic use only between and not during
takeoffs and landings. There are three main types of airport security
devices: X-ray machines (used on items placed on conveyor belts),
magnetic detectors (used on people walking through security checks),
and magnetic wands (hand-held devices used on people or individual
items). You can pass your product through airport X-ray machines. But do
not send it through airport magnetic detectors or expose it to magnetic
wands.
• Always follow any special regulations in a given area. Turn your device
off in areas where use is forbidden or when it may cause interference or
danger.
• Changing the wrist straps to metal straps might cause Bluetooth/Wi-Fi
connectivity problem.

14
Safety tips
WARNING: The charging cradle contains strong magnets that may interfere
with pacemakers, credit cards, watches, and other magnet-sensitive objects.
To avoid damaging your product and reduce the risk of fire or electric shock,
explosion, or other hazards, observe these common-sense precautions:
• Use only with cables, chargers, and other accessories approved by LG.
• Do not drop, strike, or shake your product.
• Do not damage the power cord by bending, twisting, pulling, heating, or
placing heavy items on it.
• This product is equipped with a USB cable for connecting to a desktop or
notebook computer or to the charger. Be sure your computer is properly
grounded before connecting your product to the computer. The power
supply cord of a desktop or notebook computer has an equipment-
grounding conductor and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and grounded in
acco
• Do n
equi
p
only
• Do n
prod
• Do n
• Do n
• Do n
• Clea
n
ben
z
• Disp
o
and
i
• Like
ope
r

15
t
erfere
o
bjects.
shock,
s:
L
G.
g
, or
t
op or
perly
w
er
e
d
n
accordance with all local codes and ordinances.
• Do not attempt to repair or modify or remanufacture the product. It is
equipped with an internal rechargeable battery, which should be replaced
only by LG or an authorized LG repair center.
• Do not open, disassemble, crush, bend or deform, puncture, or shred the
product.
• Do not insert foreign objects into the product.
• Do not place the product in a microwave oven.
• Do not expose the product to fire, explosion, or other hazards.
• Clean with a soft, damp cloth. Don't use harsh chemicals (such as alcohol,
benzene, or thinners) or detergents to clean your product.
• Dispose of your product and battery separately from household waste
and in accordance with local regulations.
• Like many electronic devices, your product generates heat during normal
operation. Extremely prolonged, direct skin contact in the absence of

16
adequate ventilation may result in discomfort or minor burns. Therefore,
use care when handling your product during or immediately after
operation.
• If you have a problem with using the product, please stop using it and
consult with the authorised LG Electronics customer service center.
• Do not immerse or expose the product to water or other liquids.
• Pedometer, Sleep, Exercise, and Heart rate are not intended to treat or
diagnose any medical condition, and should be used for leisure, well-
being and fitness purposes only.
• Heart rate readings can be affected by measurement conditions and
your surroundings. Make sure you are seated and relaxed before
reading your heart rate.
• Thi
s
whi
mi
n
• He
a
co
n
• Ne
v
da
m
• If y
o
to
t
• Th
e
an
d
Batte
r
• Do n

17
e
fore,
n
d
r.
a
t or
ll-
n
d
• This product is water and dust-resistant according to the IP67 Rating,
which tests submersion in water at up to one metre for up to 30
minutes. Not shockproof. The case must be completely closed.
• Heart rate readings may be affected by skin condition, measurement
conditions and your surroundings.
• Never look directly at the light of the heart rate sensor as this may
damage your eyesight.
• If your device becomes hot, remove it until it cools down. Exposing skin
to the hot surface for a long period of time may cause skin burn.
• The Heart rate feature is only intended for measuring your heart rate
and must not be used for any other purposes.
Battery warnings
• Do not disassemble or open crush, bend or deform, puncture or shred.

18
• Do not modify or remanufacture, attempt to insert foreign objects into
the battery, immerse or expose to water or other liquids, expose to fire,
explosion or other hazard.
• Make sure that no sharp-edged items, such as animal’s teeth or nails,
come into contact with the battery. This could cause a fire.
• Only use the battery for the system for which it is specified
• Only use the battery with a charging system that has been qualified with
the system per CTIA Certification Requirements for Battery System
Compliance to IEEE1725. Use of an unqualified battery or charger may
present a risk of fire, explosion, leakage, or other hazard.
• Do not short circuit a battery or allow metallic conductive objects to
contact battery terminals.
• Replace the battery only with another battery that has been qualified
with the system per this standard, IEEE-Std-1725. Use of an unqualified
battery may present a risk of fire, explosion, leakage or other hazard.
Only
non
-
• Batt
e
• Avoi
d
esp
e
serv
i
• Imp
r
• Alw
a
char
g
• The
r
• To
d
vis
i