Life Fitness Club Series User manual

CLUBSERIESADJUSTABLEBENCH
Part # 7147801
Rev C. Revision:9/18/011
ASSEMBLY INSTRUCTIONS
End of Life

PARTS LIST
PART #
71447
71446
71443
71444
71445
71315
69131xx
69132xx
69307xx
3102941
3102922
3102904
3102905
3102906
KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
QTY
1
1
2
1
1
2
1
1
1
2
4
4
3
1
KEY
15
16
17
18
19
20
21
22
23
24
25
26
27
28
OR
PART #
3223320
3202406
3102807
3102514
3228501
3104901
7131002
7131001
7145501
6866701
3116001
6866601
6535501
6866602
6866603
DESCRIPTION
3/8 X 6-1/2” BOLT
3/8 X 1-1/4” BUTTON HEAD BOLT
3/8” LOW HEIGHT LOCK NUT
3/8” SAE WASHER
3/8” BLACK SAE WASHER
3/4” FLANGE BEARING
3/4 X 3” PIVOT SHAFT
3/4 X 5-5/16” PIVOT SHAFT
3/4 X 5-5/16” CHROME PIVOT SHAFT
3/8” RH WASHER
1-1/4” SQ. RUBBER BUMPER
BLACK RH CAP
3” WHEEL
WHITE RH CAP
PLATINUM RH CAP
QTY
2
2
12
10
2
4
1
1
1
28
2
6
2
22
22
DESCRIPTION
BENCH FRAME
BACK PAD SUPPORT
BACKPADADJUST
3 X 2 X 18” TUBE
REAR UPRIGHT
BACK PADADJUST PLATE
SEATPAD
LUMBAR PAD
BACK PAD
3/8 X 1-1/2” BOLT
3/8 X 2-3/4” BOLT
3/8 X 3” BOLT
3/8 X 3-3/4” BOLT
3/8 X 4” BOLT
BOLT LENGTH
Tools Required forAssembly
2
NOTE:BOLTLENGTH ISMEASUREDFROMTHE UNDERSIDEOFTHEHEAD OFTHE BOLT.
Bolt Length Ruler
0123456
1/2 1/2 1/2 1/2 1/2 1/2
* Rubber mallet or hammer
* 9/16” wrench
* Ratchet with 9/16” socket
* 7/32”Allen wrench
*For all 5 digit part numbers you need to add the color at the end.
For shrouds and weldments please use the following codes:
xxxxx07 Denotes Platinum
xxxxx08 Denotes White
**Language placard kit comes with Dutch, French,
German, Poruguese, Spanish, Japaneese, and
Italian.
*For upholstery, please use
the following codes:
#02 ROYAL BLUE
#03 SLATE
#04 CRANBERRY
#05 NORTHWOODS
#06 SPACE BLUE
#07 AMERICAN BEAUTY RED
#08 SUEDE
#12 BLACK
#13 HUNTER GREEN
#14 REGIMENTAL BLUE
#15 GINGERSNAP
#16 CONCORD
#17 TURQUOISE
#18 RASPBERRY
#19 CROCUS

3
10 3/8 X 1-1/2” BOLT
12 3/8 X 3” BOLT
13 3/8 X 3-3/4” BOLT
14 3/8 X 4” BOLT
15 3/8 X 6-1/2” BOLT
17
3/8” LOW
HEIGHT LOCK
NUT
18
3/8” SAE
WASHER
28
RH CAP
(BLACK/WHITE/PLATINUM)
24
RH
WASHER
16 3/8 X 1-1/4” BUTTON HEAD BOLT
11 3/8 X 2-3/4” BOLT
19
3/8” BLACK SAE
WASHER
26

STEP 1:
FIGURE 1
4
• SECURELY assemble the 3 X 2 X 18” TUBE (4) and the REAR UPRIGHT (5) to the BENCH FRAME (1) using eight RH CAPS
(28), four 3/8 X 2-3/4” BOLTS (11), eight 3/8” SAE WASHERS (18), eight 3/8” RH WASHERS (24) and four 3/8” LOW
HEIGHT LOCK NUTS (17) as shown in FIGURE 1.
STEP2:
FIGURE 2
• SECURELY assemble the BACK PAD SUPPORT (2) to the BENCH FRAME (1) using two RH CAPS (28), one 3/8 X 4” BOLT
(14), one 3/4” X 3” PIVOT SHAFT (21), two 3/4” FLANGE BEARINGS (20), two 3/8” SAE WASHERS (18), two 3/8” RH
WASHERS (24) and one 3/8” LOW HEIGHT LOCK NUT (17) as shown in FIGURE 2.
14 3/8 X 4”
17
• Assemble two 1-1/4” RUBBER BUMPERS (25) to where the BACK PAD SUPPORT (2) contacts the BENCH FRAME (1).
28
1
21
20
2418
25
2
11 3/8 X 2-3/4”
5
1
4 17
18
24
28
3" x 2" End Cap
LEA6692601
3" x 2" End Cap
LEA6692601

STEP 3:
FIGURE 3
5
• SECURELY assemble the BACK PADADJUSTPLATES (6) to the BENCH FRAME (1) using six BLACK RH CAPS (26), three 3/
8 X 3-3/4” BOLTS (13), six 3/8” RH WASHERS (24) and three 3/8” LOW HEIGHT LOCK NUTS (17) as shown in FIGURE 3.
STEP 4:
FIGURE 4
• SECURELY assemble two BACK PAD ADJUSTS (3) to the BACK PAD SUPPORT (2) using two RH CAPS (28), one 3/8 X 6-
1/2” BOLT (15), one 3/4” X 5-5/16” PIVOT SHAFT (22), two 3/4” FLANGE BEARINGS (20), two 3/8” RH WASHERS (24)
and one 3/8” LOW HEIGHT LOCK NUT (17) as shown in FIGURE 4.
• SECURELY assemble one 3/4” X 5-5/16” CHROME PIVOT SHAFT (23) between the two BACK PAD ADJUSTS (3) using
two RH CAPS (28), one 3/8 X 6-1/2” BOLT (15), two 3/8” RH WASHERS (24) and one 3/8” LOW HEIGHT LOCK NUT (17)
as shown in FIGURE 4.
0123456
1/2 1/2 1/2 1/2 1/2 1/2
23 CHROME
3/8 X 6-1/2” 15
20
22
2
17
3
3
28
24
13 3/8 X 3-3/4”
17
1
24
26
6

STEP 5:
FIGURE 5
6
• SECURELY assemble the SEAT PAD (7) to the BENCH FRAME (1) using two RH CAPS (28), two 3/8 X 3” BOLTS (12) and
two 3/8” RH WASHERS (24) as shown in FIGURE 5.
STEP 6:
FIGURE 6
• SECURELY assemble the LUMBAR PAD (8) to the BACK PAD SUPPORT (2) using two 3/8 X 1-1/4” BUTTON HEAD BOLTS
(16) and two 3/8” BLACK SAE WASHERS (19) as shown in FIGURE 6. (Note direction of PAD.)
16 3/8 X 1-1/4” BUTTON
HEADBOLT
19 BLACK
2
8
24
28
1
7
3/8 X 3” 12
3”

Clean:
• Upholstery with mild soap and water.
• Guide rods with a cotton cloth.
• Hand grips with mild soap and water.
• Frame damage can be repaired with touch-up paint can be purchased from your LifeFitness customer service representative at
[phone].
Inspect:
• Cables for wear or damage and proper tension (should not exceed 3/4” deflection.) Pay close attention at bends and attachment
points.
• Hardware should be checked for looseness. Tighten as required.
• Frames should be inspected for wear or damage.
• Hand Grips should be checked for wear or damage
Lubricate:
• Lube the Guide Rods. Apply the lubricant to a cotton cloth, then run the cotton cloth up and down the guide rods as needed. Do not
spray lubricant directly on the Guide Rods.
PREVENTATIVE MAINTENANCE TIPS
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please
follow these rules:
2. Do not allow minors or children to play on or around this equipment.
1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.
Failure to do so may result in serious injury.
3. Exercise with care to avoid injury.
4. Consult your physician before beginning any exercise program.
8
Thankyouforpurchasing theLifeFitness CLUBSERIESADJUSTABLEBENCH.Ifunsureof properuse
ofequipment,call yourlocalLifeFitness distributor orcallthe LifeFitnesscustomer service departmentat
[phone].
CAUTION-PLEASE READ
Action DAILY WEEKLY QUARTERLY BI-ANNUALLY AS NEEDED
CLEAN
Upholstery X
Guide Rods X
Hand Grips X
INSPECT
Visual Overall X
Cables X
Hardware X
Frame X
Hand Grips X
LUBRICATE
Guide Rods X
WARRANTY INFORMATION
10YEARS STRUCTURUALFRAME
3 YEARS PILLOWBLOCKS,PULLEYS,WEIGHTPLATESANDGUIDE RODS
1YEAR CABLES
90 DAYS UPHOLSTERY