Linkskey LKS-SR16 User manual

LKS
-
SR16
/
SR
24
Rev.B
1
Introduction
A
The LKS-SR16/LKS-SR24 10BASE-T/100BASE-TX Switches which are
high-performance Fast Ethernet switches designed for the network core. It
provides 16/24 10BASE-T/100BASE-TX ports that can significantly improve
the performance of your network’s backbone, and deliver the throughput
needed to support a broad range of advanced network applications. With
LKS-SR16/LKS-SR24 high performance bandwidth, it provides the quickest
solution to meeting the growing demands on your network’s limited
resources.
Features
B
zComplies with the IEEE 802.3 10Base-T Ethernet and IEEE 802.3u
100Base-TX Fast Ethernet standard.
z16/24-port 10/100Mbps Auto-Negotiation.
zHalf/Full duplex capability for each port.
zSupport TP interface Auto-MDI/MDI-X function for auto TX/RX swap.
zAutomatic Source MAC Address Learning and Aging.
zSupport up to total 4K unicast addresses entries.
zSupport up to 2Mbits data buffer.
zSupport Store & Forward architecture and performs forwarding and
filtering.

LKS
-
SR16
/
SR
24
Rev.B
2
zBroadcast Storming Filter.
zRunt and CRC Filtering eliminates erroneous packets to optimize the
network bandwidth.
zSupport to handle up to 1522 bytes packet.
zLED indicators for simple diagnostics and management.
zInternal switching power supply.
zPlug and Play.
Package Contents
C
zRackmount Kit.
zUser guide.
zPower cord.
zLKS-SR16/LKS-SR24 10/100Mbps Fast Ethernet Switch.
Hardware Introduction
D
4.1 Front Panel
The unit front panel provides a simple interface monitoring the
Switch. See the chart in section 4.2 for the status of each LED
denotes.

LKS
-
SR16
/
SR
24
Rev.B
3
4.2 LED Displays
4.3 Rear Panel
The rear panel of the 16/24-port Fast Ethernet Switch indicates an
AC inlet, which accepts 100-240VAC 50-60Hz power input.

LKS
-
SR16
/
SR
24
Rev.B
4

LKS
-
SR16
/
SR
24
Rev.B
5
FCC Warning
This ations
e
equipment has been tested and found to comply with the regul
for a Class B digital device, pursuant to Part 15 of the FCC Rules. Thes
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with this
user’s guide, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the
interference at his own expense.
zReorient the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit in a different room
that to which the receiver is connected.
zConsult the dealer or an experienced radio/TV technician for help.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.

1