Linkskey LKS-SH5P User manual

1
LKS
-
SH5P / SH8P
Rev.B
Introduction
The LKS-SH5P/LKS-SH8P 10BASE-T/100BASE-TX Switches which are
high-performance Fast Ethernet switches designed for the network core. It
provides 5/8 10BASE-T/100BASE-TX ports that can significantly improve the
performance of your network’s backbone, and deliver the throughput needed
to support a broad range of advanced network applications. With
LKS-SH5P/LKS-SH8P high performance bandwidth, it provides the quickest
solution to meeting the growing demands on your network’s limited
resources.
Features
Compact size.
5/8-port 10/100 Mbps auto-MDI/MDI-X.
Secure store and forward switching scheme.
Auto correction of reverse twisted pair polarity.
All ports support half/full duplex, Nway auto negotiation.
All ports support 802.3x flow control for protectionagainst data loss.
B
A

2
LKS
-
SH5P / SH8P
Rev.B
Package Contents
User guide.
Power adapter.
LKS-SH5P / LKS-SH8P 10/100Mbps Ethernet Switch.
Hardware Introduction
4.1 Front Panel
POWER LED
This LED light is on when power is present.
5 Port LED (LKS-SH5P)
Indicates the status of each of the 5 ports.
8 Port LED (LKS-SH8P)
Indicates the status of each of the 8 ports.
Speed 100 Mbps LED
A green LED indicates the speed is 100 Mbps.
Link/Activity LED
There is a link when the LED light is lit, there is an activity when the
LED blinks.
D

3
LKS
-
SH5P / SH8P
Rev.B
4.2 LED Displays
DC-input
connect power adapter
5 Port Switch (LKS-SH5P)
connect computers, hub’s, switches or other devices.
8 Port Switch (LKS-SH8P)
connect computers, hub’s, switches or other devices.

4
LKS
-
SH5P / SH8P
Rev.B
Specifications
Standards
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3x Flow Control
Data Transfer Rate
- Ethernet : 10Mbps (half-duplex)
20Mbps (full-duplex)
- Fast Ethernet : 100Mbps (half-duplex)
200Mbps (full-duplex)
Interface 10/100Mbps Auto-MDI/MDI-X Ports
Diagnostic LED Power, Link / ACT, 100Mbps
Power Input DC 5V / 800mA
Dimension LKS-SH5P 78 x 98 x 28mm
LKS-SH8P 109 x 155 x 33mm
Operating Temperature 0°C ~ 40° C
Operating Humidity 10% ~90% RH,Non-condensing
EMI Certification FCC Class B / CE Class B

5
LKS
-
SH5P / SH8P
Rev.B
FCC Warning
This equipment has been tested and found to comply with the regulations
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with this
user’s guide, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the
interference at his own expense.
Reorient the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit in a different room
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.

1