
‑ 9 ‑ EN
5. Connect le and right arm to the frame (g. 5).
6. To disconnect arms from the frame, use a thin 4-mm tool (e.g. screwdriver),
press the interlock and pull the arms out (g. 6).
7. To x the tray, insert it in the guide unl locked in the handle (g. 7).
8. To x the toy bar, insert the ps of the bar in the guides unl locked in the
handle (g. 8).
9. LO-Niles allows adjusng leg rest in four posions. To change the backrest
inclinaon angle, press buons on the sides (le and right side) of the seat
and set a suitable posion (g. 9, 10).
10. Before changing the backrest inclinaon angle, please take the child out of
the chair and lock arms. Next, press the backrest adjustment buon (the
buon is in the back of the rest in the upper area) and change backrest
inclinaon angle. Two adjustment levels are available (g. 11).
11. 6 chair heights are available. To change the chair height, press chair height
adjustment buons located on side backrests and adjust the height (g. 12).
12.
3 tray levels are available. To adjust the tray locaon, press buons located at the
boom of the tray and set a suitable distance between the tray and seat (g. 13).
13.
To acvate a rocking feature, the lowest posion of the seat must be adjusted.
Next release the protecon by pressing the buon in the center and lower
part of the rocking chair interlock (g. 14).
Note: when the chair is rocking, you cannot change the seat height.
14.
When the chair is rocking, you can choose two available posions of the
backrest (g. 15).
15. When you have placed your child in the chair, please secure it with safety
belts. The length of belts can be adjusted by means of buckles (g. 16).
16. To fold the base, press buons on front connectors of the base and fold the
lower part by moving it to the center (g. 17).
17.
To unfold the base, press buons on front connectors of the base and unfold
the lower part by moving it to the outside (g. 18).
18. LO-Niles rocking chair can be provided with power supply in two ways.
a. Supply through a supplied feeder cable (fig. 19).
b. Supply through baeries AA (4 pieces) (g. 20).
WARNING:
•
To replace the baeries in the product, remove the baery compartment cover
and replace the baeries. Replace the cover.