Lippert Components Flex Guard Installation instructions

1
lci1.com 574-537-8900 Rev: 12.24.19
Flex Guard
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002722
Table of Contents
Introduction ............................................ 2
Features ............................................... 2
Weight Ratings ........................................ 2
Safety ................................................... 2
Resources Required ................................... 3
Parts List ................................................ 3
Single Flex Guard Kit .................................. 3
Double Flex Guard Kit ................................. 4
Triple Flex Guard Kit ................................... 4
Installation .............................................. 5
Notes .................................................... 8
Flex Guard
Installation and
Owner’s Manual
(For Aftermarket Applications)
Flex Guard Aftermarket Kit Part NumbersFlex Guard Aftermarket Kit Part Numbers
Part #Part # DescriptionDescription
1346271 Single Flex Guard Kit
1346281 Double Flex Guard Kit
1346291 Triple Flex Guard Kit

2
lci1.com 574-537-8900 Rev: 12.24.19
Flex Guard
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002722
Introduction
The Flex Guard straightens during extension and bends in
an arc as it contracts. This unique design prevents sagging
during slide-out operation as well as unnatural bends that
can lead to breakage.
Additional information about this product can be obtained
from lci1.com/support or by using the myLCI app.
Replacement kits can be ordered from https://store.lci1.
com/ or by using the myLCI app.
The myLCI app is available for free on iTunes®for iPhone®
and iPad®and also on Google Play™for Android™users.
iTunes®, iPhone®, and iPad®are registered trademarks of
Apple Inc.
Google Play™and Android™are trademarks of Google Inc.
Features
• Can be installed on any slide-out system that uses
a ¼” steel rod or swing arm for the same application.
• Single, double and triple applications.
NOTE: All kits come with 8” mounting post with star
washer and five Flex Guard clips.
Weight Ratings
NOTE: The length of the Flex Guard, short or long
application, is determined by which mounting holes
are used. If needed, cut the Flex Guard to create
a short Flex Guard.
Short Flex Guard rating:
• Single - 2 pounds
• Double - 6 pounds
• Triple - 12 pounds
Long Flex Guard rating:
• Single - 1 pound
• Double - 3 pounds
• Triple - 6 pounds
Safety
Read and understand all instructions before installing
or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables
can change the circumstances of the instructions, i.e.,
the degree of difficulty, operation and ability of the
individual performing the instructions. This manual
cannot begin to plot out instructions for every possibility,
but provides the general instructions, as necessary, for
effectively interfacing with the device, product or system.
Failure to correctly follow the provided instructions may
result in death, serious personal injury, severe product
and/or property damage, including voiding of the
LCI limited warranty.
THE “WARNING” SYMBOL ABOVE IS A SIGN THAT
A SAFETY RISK IS INVOLVED AND MAY CAUSE
DEATH, SERIOUS PERSONAL INJURY AND/OR
SEVERE PRODUCT OR PROPERTY DAMAGE IF
NOT SAFELY ADHERED TO AND WITHIN THE
PARAMETERS SET FORTH IN THIS MANUAL.
FAILURE TO FOLLOW INSTRUCTIONS PROVIDED
IN THIS MANUAL MAY RESULT IN DEATH, SERIOUS
PERSONAL INJURY, SEVERE PRODUCT AND/
OR PROPERTY DAMAGE OR VOIDING OF THE
COMPONENT WARRANTY.
THE UNIT MUST BE SUPPORTED PER
MANUFACTURER’S RECOMMENDATIONS BEFORE
WORKING UNDERNEATH. FAILURE TO DO SO MAY
RESULT IN DEATH, SERIOUS PERSONAL INJURY,
SEVERE PRODUCT AND/OR PROPERTY DAMAGE.

3
lci1.com 574-537-8900 Rev: 12.24.19
Flex Guard
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002722
THE “CAUTION” SYMBOL ABOVE IS A SIGN THAT
A SAFETY RISK IS INVOLVED AND MAY CAUSE
PERSONAL INJURY AND/OR PRODUCT OR PROPERTY
DAMAGE IF NOT SAFELY ADHERED TO AND WITHIN
THE PARAMETERS SET FORTH IN THIS MANUAL.
Resources Required
• Cordless or electric drill or screw gun
• Appropriate drive bits
• #10 x 1” wood screws (Wood screws may be required
depending on floor structure.)
Parts List
NOTE: Part numbers are shown for identification purposes
only. Not all parts are available for individual sale. All parts
with a link to the Lippert Store can be purchased.
NOTE: Flex Guard and Flex Guard clips are available in
single, double and triple belt heights.
Single Flex Guard Kit
Single Flex Guard Kit - 1346271Single Flex Guard Kit - 1346271
LetterLetter PNPN DescriptionDescription QtyQty
A 114828 Single Flex Guard, 50 1/2” 1
B 115204 Aluminum Post Assembly, 8” 1
C 100801 Single Flex Guard Clip 5
D 100899 Star Washer 1
E 118102 Screw, 1/4” - 14 x 1”, Self-drilling
Hex Head Washer 6
A
B
CD E
ALWAYS WEAR EYE PROTECTION WHEN
PERFORMING SERVICE OR MAINTENANCE TO THE
UNIT. OTHER SAFETY EQUIPMENT TO CONSIDER
WOULD BE HEARING PROTECTION, GLOVES AND
POSSIBLY A FULL FACE SHIELD, DEPENDING ON
THE NATURE OF THE TASK.
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AND USE CAUTION.

4
lci1.com 574-537-8900 Rev: 12.24.19
Flex Guard
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002722
Double Flex Guard Kit Triple Flex Guard Kit
A
B
C D E
A
B
C D E
Double Flex Guard Kit - 1346281Double Flex Guard Kit - 1346281
LetterLetter PNPN DescriptionDescription QtyQty
A 114827 Double Flex Guard, 50 1/2” 1
B 115204 Aluminum Post Assembly, 8” 1
C 100799 Double Flex Guard Clip 5
D 100899 Star Washer 1
E 118102 Screw, 1/4” - 14 x 1”, Self-drilling
Hex Head Washer 8
Triple Flex Guard Kit - 1346291Triple Flex Guard Kit - 1346291
LetterLetter PNPN DescriptionDescription QtyQty
A 100780 Triple Flex Guard, 50 1/2” 1
B 115204 Aluminum Post Assembly, 8” 1
C 100778 Triple Flex Guard Clip 5
D 100899 Star Washer 1
E 118102 Screw, 1/4” - 14 x 1”, Self-drilling
Hex Head Washer 10

5
lci1.com 574-537-8900 Rev: 12.24.19
Flex Guard
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002722
4. Install Flex Guard aluminum post mounting assembly
(Fig.2A) to the bottom of the unit oor next to the room bar,
using four provided #10 x 1” self-drilling screws (Fig.2B)
or #10 x 1” wood screws if applicable.
A
5. Install two provided #10 x 1” self-tapping screws (Fig.3A)
per belt section through the Flex Guard at end (Fig.3B) and
into the web of the I-beam (Fig.3C or Fig.4A) or the outrigger
(Fig.5A) on the chassis.
Fig.2
Fig.3
Installation
1. Position Flex Guard under the slide-out room where
the wiring or hoses to be protected are located.
2. Insert the aluminum pin (Fig.1A) into the Flex Guard
(Fig.1B) with the mounting bracket (Fig.1C) facing up.
Slide the star washer (Fig.1D) over the end of the pin
at the bottom of the Flex Guard and push in place.
3. Slide the Flex Guard clips (Fig.1E) onto the end of the
Flex Guard with the holes in the clips facing the direction
of the hoses and wiring to hold them in place. Space all
clips evenly throughout the length of the Flex Guard.
A
B
E
D
C
Fig.1
A
C
NOTE: There are several ways that the Flex Guard can be
mounted to the unit. Evaluate the layout and construction
of the unit prior to installation of the Flex Guard. This
document will detail placing the aluminum post assembly
out by the room bar that moves with the room and the
opposite end at a fixed point on the chassis.
B
B

6
lci1.com 574-537-8900 Rev: 12.24.19
Flex Guard
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002722
Fig.5
6. Slide any hoses and wiring through the holes in the
Flex Guard clips when installing in order to protect hoses
and wiring with the Flex Guard.
NOTE: Flex Guard should be kept parallel to the slide
room floor.
7. Make sure the at end of the Flex Guard is mounted
several inches away from the direction of the bend of the
retracted Flex Guard (Fig.4A and Fig.5A).
slide-out retracted (I-beam web installation option)
Fig.4
A
slide-out retracted (outrigger installation option)
room bar
room bar
mounting
bracket
mounting
bracket
A

7
lci1.com 574-537-8900 Rev: 12.24.19
Flex Guard
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002722
Flex Guard
room bar
mounting
bracket
Fig.6
Fig.7
A
8. Figure 6 depicts the Flex Guard extended with the at
end installed onto the web of the I-beam.
slide-out extended
NOTE: Over extended Flex Guard may create a crease at
the flat mounting end attachment point (Fig.7A).

8
lci1.com 574-537-8900 Rev: 12.24.19
Flex Guard
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002722
Manual information may be distributed as a complete
document only, unless Lippert Components provides
explicit consent to distribute individual parts.
All manual information is subject to change without
notice. Revised editions will be available for free
download at lci1.com. Manual information is considered
factual until made obsolete by a revised version.
Please recycle all obsolete materials and contact
Lippert Components with concerns or questions.
Notes