Sinoboom 1414E Plus User manual

1414E Plus/4655E Plus
Operation
Manual
Part No.501063100002
Rev: A
Apr 2021
GTJZ
0608E (2132E)
GTJZ
0808E (2732E)
GTJZ
0808E (2732E)
GTJZ
0808E (2732E)
长沙市宁乡高新技术产业园区金洲大道东
128 号
0731-87116111 hr@sinoboom . c om . cn ww w .sinoboom . c om . cn
Al w ays F or B e t t er A cc ess Solution s
我们一直在追求新的高 度
尺寸 ：
210×285mm
20mm
20mm
产品说明书
PRODU C T MAN U AL

Operating, servicing and maintaining this vehicle or
equipment can expose you to chemicals including engine
exhaust, carbon monoxide, phthalates, and lead, which
are known to the State of California to cause cancer and
birth defects or other reproductive harm. To minimize
exposure, avoid breathing exhaust, do not idle the engine
except as necessary, service your vehicle or equipment in
a well-ventilated area and wear gloves or wash your
hands frequently when servicing. For more information
go to: www.P65warnings.ca.gov.

Please contact us:
Website : www.sinoboom.com
E-mail : [email protected]
Sales Tel : [phone]
Service Tel : [phone]
Address : No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha,
Hunan, China
Zip Code : 410600
Copyright © Hunan Sinoboom Intelligent Equipment Co., Ltd. All Rights Reserved
The final interpretation right of this manual belongs to Hunan Sinoboom Intelligent Equipment Co., Ltd.
Manual revision history：
REV DATE DESCRIPTION REMARK
AApr. 2021 Original issue of the manual

APPLICATION
Use the following table to identify the specific serial number for
models included in this manual. Check the model of your machine before
consulting the manual, and then use the correct manual according to the
serial number of the model. See the nameplate on your machine to
identify the model and serial number.(See Decals/Nameplate Inspection
for details.)
Model
Trade identification
Serial No.
Metric Imperial
1414E Plus 1414E Plus 4655E Plus From 0106300100 to present
NOTE:
•Product model is applied in product nameplate for distinction of products of different main
parameters.
•Product trade identification is applied in marketing and machine decals for distinction of products of
different main parameters, and can be classified as metric type and imperial type: The metric type of
trade identification is applicable to machines for countries/regions using metric system or as
specially required by customers; The imperial type of trade identification is applicable to the
machines for countries/regions using imperial system or as specially required by customers.

This Page Intentionally Left Blank

STATEMENTS
Hunan Sinoboom Intelligent Equipment Co., Ltd. (Hereinafter referred to as Sinoboom) will upload the
latest product manual information to the website www. sinoboom. com as soon as possible. However,
due to continuous product improvement, the information in this manual is subject to change without prior
notice.
This manual covers the basic parts information of one or more products. Therefore, please use this
manual according to your needs. If you find problems in the manual or have suggestions for improve-
ment, feel free to share your feedback with Sinoboom, and we will address these issues as soon as
possible.
Feel free to consult and download the Operation Manual,Maintenance Manual and Parts Manual of the
products you need online at www.sinoboom.com.
Hunan Sinoboom Intelligent Equipment Co., Ltd. retains the right of final interpretation of the manual.

This Page Intentionally Left Blank

1414E Plus Operation Manual i© Apr 2021
TABLE OF CONTENTS
Introduction ............................. iii
1 Machine Specifications ........ 1-1
2 Machine Components .......... 2-1
3 Safety............................... 3-1
Safety Definitions . . . . . . . . .. . . . . . . . . . . . 3-1
Reporting Accidents. . . . . . . . . . . . . . . . . . . 3-1
Electrocution Hazards. . . . . . . . . . . . . . . . . 3-1
Tipping Hazards and Rated Load . . . . . 3-2
Work Environment Hazards . . . . . .. . . . . 3-4
Unsafe Operation Hazards. . . . . . . . . . . . 3-5
FallHazards...........................3-6
Collision Hazards . . . . . . . . .. . . . . . . . . . . . 3-7
Crush Hazards . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Explosion and Fire Hazards. . . . . . . . . . . 3-8
Damaged Machine Hazards . . . . . . . . . . 3-8
Bodily Injury Hazards . . . . . . . . . . . . . . . . . 3-8
Hydraulic Systems Hazard . . . . . . . . . . . . 3-9
Battery Hazards . . . . . . . . . . . . . . . . . .. . . . . 3-9
Charging the Battery. . . . . . . . . . . . . . . . 3-9
Handling the Battery . . . . . . . . . . . . . . .3-10
Welding and Polishing Requirements3-10
After Using the Machine. . . . . . . . . . . . . .3-10
4 Jobsite Inspection............... 4-1
5 Pre-operation Inspection ...... 5-1
Tips for Conducting a Pre-operation
Inspection.............................5-1
Conducting a Pre-operation
Inspection.............................5-1
Inspecting Parts . . . . . . . . . . . . . . . . . .. . . . . 5-2
Inspecting Entire Machine . . . . . . . . . . . . 5-2
Inspect Hydraulic Oil Level. . . . . . . . . . . . 5-2
Inspecting the Battery . . . . . . . . . . . . . . . . . 5-3
Verifying the Indoor/Outdoor Mode . . . 5-3
6 Pre-operation Function Test .. 6-1
Preparing for a Pre-operation Func-
tionTest...............................6-1
Testing the Ground Controller . . . . . . . . . 6-1
Testing the Platform Controller
（SINOBOOM）......................6-3
Testing the Platform Controller
（DTC）..............................6-5
Testing the Platform Controller
（CANPLUS）........................6-7
Testing the Drive Speed. . . . . . . . . . . . . . . 6-9
Testing the Emergency Lowering
Function..............................6-10
Testing the Tilt Protection Function . . 6-11
Testing the Pothole Guard . . . . . . . . . . .6-12
Testing the Weighing System . . . .. . . .6-12
7 Operating the machine ......... 7-1
Emergency Stop . . . . . . . . . . . . . . . . . . . . . . 7-1
Emergency Towing/Dragging . . . . . . . . . 7-2
Operation from Ground . . . . . . . . . . . . . . . 7-3
Operation from Platform . . . . . . . . . . . . . . 7-3
Operating with the Platform Control-
ler on the Ground . . . . . . . . . . . . . . . . . . . . . 7-4
Extending/Retracting the Platform . . . . 7-4
Folding/Unfolding the Rails . . . . . . . . . . . 7-5
Driving on a Slope. . . . . . . . . . . . . . . . . . . . . 7-7
Charging the Battery . . . . . . . . . . . . . . . . . . 7-8
Changing Charger Battery Curve . . . . . 7-9
Setting the Indoor/Outdoor Mode . . . . . 7-9
8 Transporting and Lifting the
Machine........................... 8-1
Lifting the Machine with a Forklift . . . . . 8-1
Lifting the Machine with a Crane . . . . . . 8-2
Transporting the Machine . . . . . . . . . . . . . 8-3

© Apr 2021 ii 1414E Plus Operation Manual
9 Maintenance ...................... 9-1
Conducting a Pre-delivery Inspection . 9-1
Following a Maintenance Schedule . . . 9-2
Completing a Repair & Inspection
Report.................................9-2
10 Decals/Nameplates
Inspection ....................... 10-1
1414E Plus Decals/Nameplates
（GB）............................10-2
1414E Plus Decals/Nameplates
（CE-Metric）.....................10-5
1414E Plus Decals/Nameplates
（CE-Imperial）...................10-8
1414E Plus Decals/Nameplates
（ANSI）.........................10-11
1414E Plus Decals/Nameplates
(CSA)............................ 10-14
1414E Plus Decals/Nameplates
（AS）........................... 10-17
1414E Plus Decals/Nameplates
（KCS）......................... 10-20
Appendix 1: Symbols and
Description.......................A-1
Appendix 2: Prepare the Work
Record Before Delivery ....... A-5
Appendix 3: Repair & Inspection
Report .............................A-7

1414E Plus Operation Manual iii © Apr 2021
INTRODUCTION
Thank you for choosing and using the machinery of
Hunan Sinoboom Intelligent Equipment Co., Ltd. Al-
ways read, understand and become familiar with the
operation requirements of the machine and its associ-
ated safety procedures before operating, maintaining
and repairing the machine. Operating the machine with-
out becoming familiar with its specific operation require-
ments and safety procedures poses serious risks.
Operators who follow safety rules and operate the ma-
chine carefully and effectively will prevent personal in-
jury, property loss and accidents.
Use this machine only to transport tools to work loca-
tions and for performing tasks on the work platform. Op-
erators must be competent and must obtain training to
carefully use the machine and follow safety procedures.
Only trained and authorized personnel may operate the
machine.
This manual guides the operator in operating and using
the machine. The operator is responsible for reading,
understanding and implementing the operation and
safety procedures in this manual and for following the
manufacturer’s instructions before beginning any work.
Read, understand and follow all safety rules and oper-
ating instructions. The operator must also consider the
machine’s uses and limitations and the conditions at
the jobsite before using this machine. Strictly following
all safety requirements in this manual is critical.
Consider this manual a part of the machine, along with
Maintenance Manual and Parts Manual, and always
keep the manuals with the machine. The owner or ad-
ministrator of the machine shall offer all manuals and
other necessary information provided by the machine
manufacturer regarding the daily inspection and main-
tenance to each of the renters. If the machine is sold,
the owner or administrator must pass along the man-
uals and other necessary information to the purchaser.
The owner or administrator of the machine shall also
provide the manufacturer’s maintenance information to
the person responsible for maintaining the machine.
If you have any questions, contact Hunan Sinoboom In-
telligent Equipment Co., Ltd..

© Apr 2021 iv 1414E Plus Operation Manual
This Page Intentionally Left Blank

1414E Plus Operation Manual 1-1 © Apr 2021
1MACHINE SPECIFICATIONS
Table 1-1 1414E Plus specifications
MEASURE 1414E Plus (METRIC) 4655E Plus (IMPERIAL)
DIMENSION
Max platform height, indoor 13.8m 45ft 3.3in
Max platform height, outdoor 8.5m 27ft 10.6in
Max working hegiht, indoor 15.8m 51ft 10in
Max working hegiht, outdoor 10.5m 34ft 5.4in
Max horizontal reach 0.9m 3ft
Overall length 2.78m 9ft
Overall width 1.41m 4ft 7in
Overall height（stowed with rails
folded）1.98 m 6ft 6in
Overall height（stowed with rails not
folded）2.6m 8ft 6in
Wheelbase 2.22m 7ft 3in
Wheelspan 1.26m 4ft 1.6in
Ground clearance（pothole guard
retracted）95mm 3.74in
Ground clearance（pothole guard
extended）25mm 0.98in
Tire size (diameter × width / type) Φ380x125mm/solid Φ15×5in/solid
Platform dimension (L × W × H) 2.64m×1.3m×1.1m 8ft 8in×4ft 3in×3ft 7in
PERFORMANCE
Rated platform capacity 350 kg 772 lb
Max capacity of extension platform 120kg 265lb
Max. platform occupancy(indoor/
outdoor) 2 persons（indoor）/1 person（outdoor）
Drive speed (stowed) 0～4km/h 0～2.5mph
Drive speed (raised) 0～0.8km/h 0～0.5mph
Up time（no-load）75s～85s
Down time（no-load）55s～63s
Gradeability 20%
Max. allowable inclination 3°（front-to-back）/1.5°（side-to-side）
Turning radius (inside) 0 0

© Apr 2021 1-2 1414E Plus Operation Manual
MACHINE SPECIFICATIONS
Table 1-1 1414E Plus specifications (continued)
MEASURE 1414E Plus (METRIC) 4655E Plus (IMPERIAL)
Turning radius (outside) 2.64m 8ft 8in
Max. allowable side force (indoor/
outdoor) 400N（indoor）/200N（outdoor）90lbf（indoor）/45lbf（outdoor）
Max operating noise 72dB
POWER
Hydraulic tank capacity 15L 3.3gal（UK）/4gal（US）
Hydraulic system capacity (including
tank)
41L 9gal（UK）/10.83gal（US）
Hydraulic system pressure 21MPa 3046Psi
Battery specification (quantity ×
voltage, capacity) 4×12 V,280 Ah
System voltage 24VDC
Control voltage 24VDC
GROUND BEARING DATA
Max wheel load 1300kg 2866lb
Pressure against ground 1330kPa 130Psi
ENVIRONMENT
Max. allowable wind speed (indoor/
outdoor)
0m/s（indoor）/12.5m/s
（outdoor）
0mph（indoor）/28mph（outdoor）
Max. allowable altitude 1000m 3280ft
Allowable ambient temperature
(lead-acid batteries)
-10℃～40℃14℉～104℉
Allowable ambient temperature (-
lithium batteries)
-20℃～40℃-4℉～104℉
Max allowable RH 90%
Storage condition
Stored at -20℃to 50℃(-4℉to 122℉) in a well-ventilated environment with
90% relative humidity (20℃[68℉]), and away from rain, sun, corrosive gas
and inflammable explosive.
WEIGHT
Gross weight（unladen）3660kg 8069lb
NOTE:
a) The working height adds 2m (6ft 7in) of human height to platform height.
b) In different areas, hydraulic oil, engine oil, coolant, fuel and lubrication should be added in accordance with the
environmental temperature.
c) In cold weather, auxiliary devices are needed to start the machines.
d) The ground bearing data is approximate values not considering different options and only used when it is safe
enough.
e) The loads of persons, accessories, tools and materials are factored into the rated platform capacity.

1414E Plus Operation Manual 2-1 © Apr 2021
2MACHINE COMPONENTS
Figure 2-1
21
22
23
24
2533
32
31
2930
28
27
26
18
6
7
5
4
1
3
2
9
11
12
12
10
20
19
17
16
15
14
13

© Apr 2021 2-2 1414E Plus Operation Manual
MACHINE COMPONENTS
Table 2-1
COMPONENTS CHINA* ROK JAPAN POLAND AS OTHER-
S** NA
1.Stationary platform ●
2.Footswitch ◆●◆
3.Extension platform ●
4.Manual storage container ●
5.Height limit device ◆●◆
6.Work light ◆
7.Platform controls ●
8.AC power outlet ◆ ● ●
9.Platform entry gate ●
10.Safety arm ●
11.Scissor assembly ●
12.Lift cylinder ●
13.Industrial elctrical plug ●
14.Emergency lowering
handle ●
15.Charge plug ●
16.Pothole guard plate ●
17.Battery ●
18.Power-off plug and handle ●
19.Charger ●
20.Chassis door, LH ●
21.Ladder ●
22.RCBO control box ◆ ● ◆
23.Level sensor ●
24.Chassis ●
25.Flash beacon ● ●
26.Drive motor & reducer ●
27.Steer cylinder ●
28.Steer wheel ●
29.Ground controls ●
30.Chassis door, RH ●
31.Hydraulic tank ●
32.Power unit ●

MACHINE COMPONENTS
1414E Plus Operation Manual 2-3 © Apr 2021
Table 2-1 (continued)
COMPONENTS CHINA* ROK JAPAN POLAND AS OTHER-
S** NA
33.Rear wheel ●
CHINA* Mainland China, excluding HK, Taiwan
OTHERS** Generally referring to the countries in Europe, Middle East and other
regions outside of countries and regions like China, South Korea, Japan,
Poland, Australia and North America that have special requirements.
●Standard feature equipped as a must as per the standards, laws,
regulations and customer demands
◆Optional feature tailored to customer demands

© Apr 2021 2-4 1414E Plus Operation Manual
This Page Intentionally Left Blank
MACHINE COMPONENTS

1414E Plus Operation Manual 3-1 © Apr 2021
3SAFETY
Read, understand and comply with the safety rules and
regulations of your workplace and your government.
Before using the machine, obtain proper training on
safe machine operation and make sure you can safely
control and operate the machine.
Understand that as the operator you have the responsi-
bility and right to shut down the machine in case of fail-
ure with the machine or other emergency at your
workplace.
NOTICE
People suffering from heart disease, hypertension,
epilepsy and other diseases and people who fear
heights must never operate or use this machine. Al-
so, people who have alcohol or drugs in their system,
or experience excessive fatigue or depression, are
prohibited from operating or using this machine.
SAFETY DEFINITIONS
This safety alert symbol appears with
most safety statements. It means atten-
tion, become alert, your safety is in-
volved! Please read and abide by the
message that follows the safety alert
symbol.
Indicates a hazardous situation that, if not
avoided, will result in death or serious injury.
Indicates a hazardous situation that, if not
avoided, could result in death or serious injury.
Indicates a hazardous situation that, if not
avoided, could result in minor or moderate injury.
NOTICE
Indicates a situation that can cause damage to the
engine, personal property and/or the environment, or
cause the equipment to operate improperly.
NOTE: Indicates a procedure, practice or condition that
should be followed in order for the engine or component
to function in the manner intended.
REPORTING ACCIDENTS
In case of any accident involving the machinery of
Hunan Sinoboom Intelligent Equipment Co., Ltd., notify
Hunan Sinoboom Intelligent Equipment Co., Ltd. Imme-
diately, even if no personal injury or property damage
occurs during the accident. Contact Hunan Sinoboom
Intelligent Equipment Co., Ltd. by telephone and pro-
vide all necessary details. Failure to notify the manufac-
turer within 48 hours of the incident involving the
machinery of Hunan Sinoboom Intelligent Equipment
Co., Ltd.may void the product's warranty.
NOTICE
Thoroughly inspect the machine and all its functions
after any accident, being sure to test first from the
ground controller and then from the platform control-
ler. Ensure the machine's lifting height does not ex-
ceed 3 m(9.8 ft) until all damage has been repaired
and all controllers operate properly.
ELECTROCUTION
HAZARDS
NOTE: This machine is not insulated and does not have
an electric shock protection function.
All operators and managers shall comply with national
or local regulations regarding the minimum safe dis-
tance of live conductors above the ground. In the ab-
sence of such requirements, operators and managers
should follow the minimum safety distance require-
ments in Table 3-1 , page 3-2.

© Apr 2021 3-2 1414E Plus Operation Manual
SAFETY
ELECTRICAL SHOCK HAZARDS
• Always maintain a safe distance
from power lines and electrical
equipment in accordance with ap-
plicable government regulations
and see Table 3-1 , page 3-2.
• Consider platform movement,
wire swinging or drooping, be-
ware of strong winds or gusts,
and do not operate the machine
when there is lightning or heavy
rain.
• If the machine comes into contact
with live wires, keep away from
the machine. Personnel on the
ground or on the platform must
not touch or operate the machine
until the power is switched off.
• Do not use the machine as a
ground wire during welding and
polishing operations.
Table 3-1
Voltage
(Phase to Phase, kV)
Minimum Safe Distance
(m/ft)
0-50 3.05 (10)
50-200 4.60 (15)
200-350 6.10 (20)
350 -500 7.62 (25)
500 -750 10.67 (35)
750 -1000 13.725 (45)
TIPPING HAZARDS AND
RATED LOAD
Maximum rated load bearing capacity of the platform:
Table 3-2
1414E Plus
Platform rectracted 350 kg（772 lb）
Platform extended-fixed
platform only 230kg（507lb）
Platform extended-extension
platform only 120kg（265lb）