
User manual
6
USE OF THE APPLIANCE
Before first use, remove all ackaging and wi e the cooking late with a dam cloth, then dry it.
1. Insert the lug into a ower outlet; ress the on/off button on the unit. The ower indication light
will illuminate.
2. Choose the late you want to use and lace it on the base.
3. Wait few minutes for cooking late to reheat.
4. Then you can ut a small amount of butter onto the cooking late and s read it.
5. Put cre e batter on cooking late (measure according to the desired thickness) and using circular
motion, lace the s reader on the surface of the batter so that it covers the baking late.
Note: Di the batter s reader in water between every cre e to make, this makes easier to s read
the batter.
6. Cook it 2 minutes on each face lift. To turn over the cre e, use a s atula.
7. Cook cre e until just golden.
8. Remove the cre e from the cooking late using a s atula. If the last cre e cooked was too dark,
shorten the cooking hours before making your next cre e.
9. Place the cre e on a late and add the to ing of your choice. Never add to ings to the cre e
when it is still on baking late.
10. At the end of cooking, switch off the unit by ressing the on/off button. Remove the lug from the
socket. Allow the a liance to cool then clean before storing.
CLEANING AND MAINTENANCE
Caution:
Do not use wire brush or any abrasive items or liquids to clean the a liance (baking late, base and
accessories).
1. Never immerse the a liance base in water.
2. Always remove the lug from the socket before cleaning the a liance and Ensure that the
a liance has com letely cooled down.
3. Clean the accessories and the baking late with soa y water. If you want, you can ut the cooking
lates on the dishwasher
4. Use dam cloth to clean the a liance base.