Lorell LLR60536 User manual

LLR60535,60536,60537,60538
Assembly Instructions
Carefully unpack all parts and identify them with parts list before attempting
to assemble the chair.
IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS FULLY UNTIL
YOU HAVE COMPLETED THE FINAL ASSEMBLY.
1. Put 5 CASTERS (A) into the holes on 5 STAR BASE (B).
2. Insert GAS LIFT (C) into the center hole top of 5 STAR BASE (B).
3. Insert BELLOW (D) over GAS LIFT (C).
4. Attach both the left and the right ARMRESTS (F) to SEAT CUSHION
(E) by using 2 KNOBS (H) and 2 WASHERS (G).
5. Insert BACK CUSHION (I) with the BACK SUPPORT into the SEAT
PLATE. Attach the KNOB (J) to the SEAT PLATE of the SEAT
CUSHION (E). Adjust BACK CUSHION to desired height and tighten
KNOB (J).
6. Insert the pre-assembled seat unit onto the gas lift to finish the
assembly.
7. Be sure that all the screws are fully tightened before using.
Parts List
Description Quantity
A. CASTERS
5
B. 5 STAR BASE
1
C. GAS LIFT
1
D. BELLOW
1
E. SEAT CUSHION
1
F. ARMRESTS (L&R)
2
G. WASHERS
2
H. KNOBS
2
I. BACK CUSHION
1
J. KNOB
1

LLR60535
OPERATING INSTRUCTIONS FOR
MULTI-FUNCTION MECHANISM
1. Back Height Adjustment.
The back cushion moved upward which is divided into 5 stages, it
can be stayed at any stage. The back cushion automatically
descended to the lowest position when it is raised to the last stage.
2. Back Posture Adjustment.
To adjust angle of the back, pull paddle up.
Adjust back, push paddle down to lock.
3. Seat Height Adjustment.
To raise the seat, pull lever upward and raise your body up slightly
to allow the chair to rise to the desired height.
To lower the seat, pull lever upward and apply weight downward on
the seat.
4. Seat Posture Adjustment.
To adjust angle of the seat, pull paddle up.
Adjust seat, push paddle down to lock.
5. Seat angle.
To adjust the forward tilt angle of seat by turning lever clockwise or
counter-clockwise.
6. Tilt Tension Control Knob.
Turn knob clockwise to increase tilt tension.
Turn knob counter-clockwise to decrease tilt tension.
7. Seat Slide Adjustment.
Pull the lever upwards, the seat shall slide forwards and
backwards.
Push the lever downwards, the seat shall be locked in position.
When people left the seat, pull the lever upward, the chair will
recover to the original site.