Lorell 59605 User manual

IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to make sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packaging straps before you start to assemble.
• Do not tighten all screws/bolts until pieces are completely assembled.
• Keep all hardware parts out of children's reach.
• It is recommended for 2 persons to complete this assembly.
Assembly Instructions
Top Panel 59605/16202/16200/16201/59607/16199/34405/16198
Side Leg Frame-Full Length 16204/16205
Adjustable Cross Bar Set 16208
Side Leg Frame-Short Length 16206/16207
High Table Side Leg Frame 16209
TWO PEOPLE ARE REQUIRED TO
ASSEMBLE AND MOVE THIS MODEL
Rubber hammer
STEP 1
STEP 1- STEP 5 STEP 6- STEP 12
STEP 2
DESK-60W*24D:LLR59605/16202+LLR16204(2pcs)+LLR16208
DESK-72W*24D:LLR59607/16199+LLR16204(2pcs)+LLR16208
DESK-60W*30D:LLR16200/16201+LLR16205(2pcs)+LLR16208
DESK-72W*30D:LLR34405/16198+LLR16205(2pcs)+LLR16208
DESK-60W*24D(High Table):LLR59605/16202+LLR16209(2pcs)+LLR16208
DESK-72W*24D(High Table):LLR59607/16199+LLR16209(2pcs)+LLR16208
DESK-60W*24D:LLR59605/16202+LLR16204+LLR16206+LLR16208
DESK-72W*24D:LLR59607/16199+LLR16204+LLR16206+LLR16208
DESK-60W*30D:LLR16200/16201+LLR16205+LLR16207+LLR16208
DESK-72W*30D:LLR34405/16198+LLR16205+LLR16207+LLR16208
Frame-Full
1 PC
Frame-Short
1 PC Leg Frame
1 PC
LLR16204
Side Leg Frame
-Full Length (24”)
LLR16206
Side Leg Frame
-Short Length (24”)
LLR16209
High table Side
Leg Frame
LLR16208
Adjustable Cross
Bar Set Cross Bar Set
1 PR
Adjustable Glide
2 PCS
Adjustable Glide
2 PCS
U Bracket
4 PCS Screw M4.8*22 8 + 2 extra PCS
Screw M4.8*22
6 + 2 extra PCS
Screw M4.8*22
6 + 2 extra PCS Screw M4.8*22
6 + 2 extra PCS
Screw M8*20
4 PCS Screw M8*8 8 PCS Allen Wrench-4# 1 PC Allen Wrench-5# 1 PC
A
KA
D
B
CB
E C H
C
C
F G I
Frame-Full
1 PC
LLR16205
Side Leg Frame
-Full Length (30”) Adjustable Glide
2 PCS Screw M4.8*22 6 + 2 extra PCS
Screw M4.8*22
6 + 2 extra PCS
A B C
Frame-Short
1 PC
LLR16207
Side Leg Frame
-Short Length (30”)
L C

IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to make sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packaging straps before you start to assemble.
• Do not tighten all screws/bolts until pieces are completely assembled.
• Keep all hardware parts out of children's reach.
• It is recommended for 2 persons to complete this assembly.
Assembly Instructions
Top Panel 59605/16202/16200/16201/59607/16199/34405/16198
Side Leg Frame-Full Length 16204/16205
Adjustable Cross Bar Set 16208
Side Leg Frame-Short Length 16206/16207
High Table Side Leg Frame 16209
STEP 3 STEP 4
STEP 5 STEP 6
If the other leg does’nt align the edge of
the top panel,usually need one man make
this leg at the correct position,another man
tighten 6 pcs screw “C”.
Only assemble one side leg using 6 pcs
screw “C”.
Suggest to keep the
distance of 5mm from metal
edge to panel edge.
Suggest to keep the
distance of 5mm from metal
edge to panel edge.
Move the black mark to the center position,
then tighten the screw “G”.
Rubber hammer
mark
distance
TWO PEOPLE ARE REQUIRED TO
ASSEMBLE AND MOVE THIS MODEL

IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to make sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packaging straps before you start to assemble.
• Do not tighten all screws/bolts until pieces are completely assembled.
• Keep all hardware parts out of children's reach.
• It is recommended for 2 persons to complete this assembly.
Assembly Instructions
Top Panel 59605/16202/16200/16201/59607/16199/34405/16198
Side Leg Frame-Full Length 16204/16205
Adjustable Cross Bar Set 16208
Side Leg Frame-Short Length 16206/16207
High Table Side Leg Frame 16209
STEP 7
STEP 9
STEP 8
STEP 10
If the other leg does’nt align the edge of
the top panel,usually need one man make
this leg at the correct position,another man
tighten 6 pcs screw “C”.
Rubber hammer
TWO PEOPLE ARE REQUIRED TO
ASSEMBLE AND MOVE THIS MODEL
Only assemble one side leg using 6 pcs
screw “C”.
Suggest to keep the
distance of 5mm from metal
edge to panel edge.
Suggest to keep the
distance of 5mm from metal
edge to panel edge.

IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to make sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packaging straps before you start to assemble.
• Do not tighten all screws/bolts until pieces are completely assembled.
• Keep all hardware parts out of children's reach.
• It is recommended for 2 persons to complete this assembly.
Assembly Instructions
Top Panel 59605/16202/16200/16201/59607/16199/34405/16198
Side Leg Frame-Full Length 16204/16205
Adjustable Cross Bar Set 16208
Side Leg Frame-Short Length 16206/16207
High Table Side Leg Frame 16209
STEP 11 STEP 12
Move the black mark to the center position,
then tighten the screw “G”.
mark
distance
TWO PEOPLE ARE REQUIRED TO
ASSEMBLE AND MOVE THIS MODEL

Instructions d’assemblage
NOTE IMPORTANTE :
• Déposez toutes les pièces laminées sur une surface propre et douce comme
sur une carpette ou un tapis afin d’éviter l’éraflure des pièces.
• Vérifiez pour vous assurer que vous avez toutes les pièces et toute la quincaillerie.
• Enlevez tout le matériel d’emballage, incluant les agrafes et les courroies d’empaquetage avant de débuter l’assemblage.
• Ne serrez pas aucun des boulons/vis avant d’avoir assemblé toutes les pièces.
• Gardez toutes les pièces de quincaillerie hors de portée des enfants.
• Il est recommandé que 2 personnes effectuent cet assemblage.
Surface de travail 59605/16202/16200/16201/59607/16199/34405/16198
Pied de table en châssis long 16204/16205
Traverses réglables 16208
Pied de table en châssis court 16206/16207
Pied de table en châssis (long) 16209
Marteau
de caoutchouc
ÉTAPE 1
ÉTAPE 1- ÉTAPE 5 ÉTAPE 6- ÉTAPE 12
ÉTAPE 2
DESK-60W*24D:LLR59605/16202+LLR16204(2pcs)+LLR16208
DESK-72W*24D:LLR59607/16199+LLR16204(2pcs)+LLR16208
DESK-60W*30D:LLR16200/16201+LLR16205(2pcs)+LLR16208
DESK-72W*30D:LLR34405/16198+LLR16205(2pcs)+LLR16208
DESK-60W*24D(High Table):LLR59605/16202+LLR16209(2pcs)+LLR16208
DESK-72W*24D(High Table):LLR59607/16199+LLR16209(2pcs)+LLR16208
DESK-60W*24D:LLR59605/16202+LLR16204+LLR16206+LLR16208
DESK-72W*24D:LLR59607/16199+LLR16204+LLR16206+LLR16208
DESK-60W*30D:LLR16200/16201+LLR16205+LLR16207+LLR16208
DESK-72W*30D:LLR34405/16198+LLR16205+LLR16207+LLR16208
Châssis
x1
Châssis court
x1 Pied de table
en châssis x1
LLR16204
Pied de table
en châssis long
(24 po)
LLR16209
Pied de table en
châssis (long)
LLR16208
Traverses
réglables Traverses réglables
1 paire
Patin d’ajustement
x2
Patin d’ajustement
x2
Support
x4 Vis M4.8*22 x8 + 2 extra
Vis M4.8*22
x6 + 2 extra
Vis M4.8*22
x6 + 2 extra Vis M4.8*22
x6 + 2 extra
Vis M8*20
x4 Vis M8*8 x8 Clé hexagonale-4# x1 Clé hexagonale-5# x1
A
KA
D
B
CB
E C H
C
C
F G I
Châssis
x1
LLR16205
Pied de table
en châssis long
(30 po)
Patin d’ajustement
x2
Vis M4.8*22
x6 + 2 extra
Vis M4.8*22
x6 + 2 extra
A B C
Châssis court
x1
LLR16207
Pied de table en
châssis court
(30 po)
L C
LLR16206
Pied de table en
châssis court
(24 po)
2 personnes sont requises pour l’assemblage
et le déplacement de ce modèle.