Ltech 101 CT User manual

CT
Product Features
User-defined lighting mode
Limitless long-range control
Specialized smart home setting
Intelligent lighting timing set
2 CT mode selection
Product Parameters
Product Name :
Model :
Input Voltage :
Out Control：
Max Current Load :
Max Output Power :
Working Temperature :
Protocol :
Dimension :
Packing：
Net Weight :
Gross Weight :
WiFi LED Controller
WiFi-101-CT
12 ~ 24Vdc
CT LED Lights
6A x 2CH Max 12A
（0~72...144W）x2CH
-30℃ ~ +55℃
2.4GHz Wi-Fi, 802.11b/g/n
L125 x W33 x H20(mm)
L127 x W35 x H24(mm)
52g
70g
Product Structure Product Installation Attention
★ This manual only applies to this model. We
reserve the right to make changes without
prior notice.
1.
by the qualified person.
2.This product is non-waterproof. Please avoid
the sun and rain. When installed outdoors,
please ensure it is mounted in a water proof
enclosure.
3.Good heat dissipation will prolong the
working life of the controller. Please ensure
good ventilation.
4.Please check if the output voltage of the LED
power supply used comply with the working
voltage of the product.
5. Please ensure that adequate sized cable is
used from the controller to the LED lights to
carry the current. Please also ensure that the
cable is secured tightly in the connector.
6.Ensure all wire connections and polarities
are correct before applying power to avoid
any damages to the LED lights.
7.If a fault occurs please return the product to
your supplier. Do not attempt to fix this
product by yourself.
The product shall be installed and serviced
WiFi-101-CT
LED Strip
Power Adapter
220/110Vac
Load power below 75W,
use this round adapter
socket for connection.
DC Power supply socket
(φ5.5mm x φ2.5mm)
LED lamp
connection socket
The running light
Power indicator
12~24Vdc
power input Setting key
All manuals and user guides at all-guides.com
all-guides.com

iOS / Android
2
3
1
4 5 6
Operating Instruction
Operating Guidance
Operating Schematic
Scan QR Code to download the APP via
mobile phone.
Open WLAN via mobile phone, connect
to the wireless router.
Enter the interface "To select a device",
choose "CT strip" and follow the prompts
to connect.
Once successfully connect to the device
that will immediately open intelligent
life and realize long-distance control via
mobile phone.
Turn on APP, enter "My Device"
click" "icon.
interface,
After installation, the strip flashes within
30s when powered on and then the
controller is ready to the configuration
status accordingly.
All manuals and user guides at all-guides.com