Ltech WiFi-102-RGBW User manual

…
Operating Instruction
WiFi-102-RGBW
WiFi-102-CT
Model：
Living room lights
Bedroom lights
Corridor lights
Dinning room lights
System Diagram
Wireless router
APP
Smart
speaker
Remote
Touch
panel
After WiFi LED controller matched up with a
router, brush it out in APP and enter the main
control interface, click the "+" key in the upper
right corner to enter next interface, find the
appropriate model and match code according to
the prompt.
Match code between panel / remote & WiFi
LED controller:

Model WiFi-102-RGBW
Product Parameters
WiFi LED Controller
12 ~ 24Vdc
RGBW LED lights
3A x 4CH Max. 12A
(0~36...72W)x4CH
WiFi 2.4GHz , IEEE 802.11b/g/n
2.4GHz
-30℃ ~ +55℃
L125 x W33 x H20(mm)
L127 x W35 x H24(mm)
70g
Product Name
Out Control
Current Load
Output Power
Network Type
RF Frequency
Working Temp.
Dimension
Packing
Gross Weight
Input Voltage
WiFi LED controller can be connected with
lamps directly, support remote control via
intelligent device, mobile phone, remote and
touch panel etc., flexible application makes
life more intelligent.
WiFi-102-CT
CT LED lights
Max. 6A
0~72W...144W
33mm
120mm
20mm
125mm
Product Structure
DC Power supply socket
(φ5.5mm x φ2.5mm)
12~24Vdc
power input
LED lamp
connection socket
The running light
Power indicator
Setting key
Long press 6s to
default setting

Product Installation
WiFi-102-RGBW
WiFi-102-CT
LED strip
Power adapter
220/110Vac
Load power below
240W, use this round
adapter socket for
connection.
iOS / Android
Operating Guidance
Scan QR Code to download the APP via
mobile phone.
Open WLAN via mobile phone, connect
to the wireless router.
After installation, the strip flashes within
30s when powered on and then the
controller is ready to the configuration
status accordingly.
1
2
3
我的路由器
邻居 的路由器
邻居 的路由器
邻居 的路由器
Setting WLAN
WLAN
CHOOSE A NETWORK...
My router
Neighbor’s router
Neighbor’s router
Neighbor’s router
3:30 PM

4 5
Turn on APP, click icon on the right
top corner.
Enter the interface "Add Device", choose
"Color light" or “CT light” and follow the
prompts to connect.

6Once successfully connect to the device
that will immediately open intelligent
life and realize long-distance control via
mobile phone.
Attention
★ This manual only applies to this model. We
reserve the right to make changes without
prior notice.
1.
serviced by the qualified person.
2.This product is non-waterproof. Please
avoid the sun and rain. When installed
outdoors, please ensure it is mounted in a
water proof enclosure.
3.Good heat dissipation will prolong the
life time of the controller. Please ensure
good ventilation.
4.Please check if the output voltage of the
LED power supply used comply with the
working voltage of the product.
5. Please make sure the diameter of the
wire must be sufficient to load the
connected LED lights with firm wire
connection.
6.Ens ure all wire co nn ec tions an d
polarities are correct before connecting
with power to avoid any damages to the
LED lights.
7.If errors caused, please do not attempt
to fix this product by yourself, please
contact the supplier.
The product shall be installed and
www.ltech-led.com Update time: 2018.11.01_A0