Ltech WiFi-102 LED Controller User manual

1
WiFi-102 LED Controller manual
2
WiFi-102 LED Controller
With the improvement of people's living standard, more and more products are linked to mobile devices like
smart phones, tablet PCs, which makes life simple and intelligence. Using the emerging mobile device to
control LED lighting products becomes the aspirations of each customer. As a result, WiFi-102 controller
appeared, with the installation of controlling software on mobile devices like Android & IOS phones, tablet PCs.
they can remote control LED lighting products through WiFi, which makes LED control more intelligent and
humanization.
One WiFi - 102 controller can be used as dimmer, CT controller, even RGB controller. which means a significant
saving to middleman who need to stock up, now one product will realize your three desires.
In addition, this model has DIY function, Users can get any effect they want based on our controlling software
If you don't have any mobile devices with the controlling software at hand, you could also use our touch
controller-T series (T1, T2, T3) to control it , which provides more choices!
WiFi and remote wireless control operate based on the global universal 2.4 GH frequency range, By using thez
same 2.4G antenna, the space pollution caused by WiFi and remote control using wireless signal from different
frequency range will be largely reduced.
WiFi-102 Technical parameters
Max 3A*3
L127.6×W73×H44.5mm
L135×W80×H50mm
290g
-20 ~50℃℃
Output current
Operating temperature
Dimensions
Weight (G.W)
Power supply
LED CV SMPS
DC12V~DC24V
Input voltage
Control distance
Max 100m
Software Technical parameters
Android 2.1 or above, IOS4.3 or above, with the wifi function
Android(2.2MB), iOS(3.4MB)
English
Tool
Free, Plug-in-free
Platform
Size
Language
Category
Others
RGB color change mode
32 fixed modes, 8 DIY modes
flexibly control single color, cold warm color, RGB LED lighting fixture
Output control
Scene mode
9
Controller operating instructions
3.
Side A Side B
Power input/LED output
indicator
light instructions
RUN
LINK
RX/TX
The indicator flashes quickly about 25 seconds during the electric initialization. Flashes once per second after
initialization finished.
The indicator light stays lit when the mobile device connects with WIFI controller, and turns off when not
connected.
The indicator light turns on when the controller receives or transmits the WiFi data. Turns off in the free time.
EXT Key RJ45 SSID code switch
2. Work status indicator instructions
127.6mm
73mm
44.5mm
1. Install / uninstall ANT
ANT installation instruction
Install the WiFi antenna clockwise, uninstall anticlockwise
RUN
RX/TX
LINK
EXTKEY SSID ON/OFF SCENE
RUN
RX/TX
LINK
EXTKEY SSID MATCH FUN
on/off scene
Indicator
LTECH LTECH
ZHUHAI LTECH ELECTRONIC TECHNOLOGY CO., LTD. WWW.LTECHONLINE.COM [e-mail]
Tel: [phone] Fax: [phone]
RoHS
COMPLIANT
warranty
3 years
ISO9001:2008
1. Product arameterp
Package size
2. Configuration Diagram
WiFi-102 LED Controller manual

3 4
3 SSID Number setting.
Use code switch to set the controller's SSID Number-- WIFI-101-SSID-X, X is the code switch numerical value (total
16 No. from 0 to F). which means our product could set 16 isolated LAN in the same area. The controller will re-enter
initialization status once the code switch changes. RUN LED indicator light will flash quickly about 25 seconds, mobile
device need to search and connect WiFi again after Initialization finished.
4. “ON/OFF” “ Scene Key”
Press “ON/OFF “to turn on / off controller
Long press “Scene” to the 1st scene mode. short press Scene to scene mode sequentially , Scene mode changes“”
from 1 to 9, then changed back from 9 to 1.
5 EXT Key network port.
EXT Key network port is used to connect the external button, 7 signal wires plus 1 GND wire,1# signal wire is the
ON/OFF button,2-7# signal wire represents 1-6 scene mode.
LED controller software instructions
4.
(1) Ltech WIFI-100 software installation
this software has two versions -Android & iOS, choose the installation based on your mobile device. Check the
installation and usage of each version below
1) Installation of Android version: Transmit the installation package to the mobile device memory card and
Click to install.
2 installation of iOS version: A. search “WiFi-100 “ in the App store through)
mobile device and install.
B. after connecting the mobile device with PC, search “WiFi-100” in the
through iTunes and install.
Current White
AT&T
AT&T 12:34 PM
12:34 PM
Current White
Save
Settings
Scene
50
W050
Current White
AT&T
AT&T 12:34 PM
12:34 PM
Current White
Save
Settings
Scene
50
WWW 10050
Current White
AT&T
AT&T 12:34 PM
12:34 PM
Current White
SettingsStyle
Editor Scene
50
Save
GR 255255 255
B
2 RGB,CT,DIM driver color wheel interface.
Click” Setting “to setting interface, Select RGB, CT or DIM driver to get into each one's color wheel interface.
By touching the color wheel, the color, brightness, color temperature of the connected LED could be adjusted，
the brightness can also be changed by the brightness slider which is above the color wheel.
Save
Dimming mode CT mode RGB mode
Scene save key
parameter values
brightness slider
currently
selected color
turn on/off the
controller
Click to restore the
default white
color wheel
Setting
Modes
Scene interface
key
RGB editing interface
SettingsStyle
Editor Scene
AT&T
AT&T 12:34 PM
12:34 PM
Current
Current White
White
Save
50
GR 255255 255
B
Wifi is not enable currently!
?Do you want to turn it on now
Wifi is not enable currently!
OK
OK
Warning
Warning
prompt box saying without
WiFi connection
AT&T
AT&T 12:34 PM
12:34 PM
Settings
Settings
Wifi Connection
CT Driver
DIM Driver
Driver
Driver
setting interface
RGB Driver
return to a previous interface
iOS WiFi connectionAndroid WiFi connection
RUN
RX/TX
LINK
EXTKEY SSID ON/OFF SCENE
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
1. WiFi connection and settings
()1 Click mobile devices' WiFi-setting, enable the WiFi function. The system will search automatically and list the
SSID No. for the controller (as shown below). Click the SSID No, to connect.
()2 Click to Enable software (if the Mobile devices'WiFi function is closed, the prompt box saying without WiFi
connection will pop up. Click “ok” to close the Dialog box and exit the application .go back to step (1) for the WiFi
connection.
Click settings to setting interface. Setting interface is used to switch among RGB, CT, DIM drivers and enter the
WiFi connection interface.
WiFi connection interface is for displaying the information of the connected controller.
Note: Device IP and port number are the fixed value, which are unchangeable.
(2) Software Operating Instructions
AT&T
AT&T 12:34 PM
12:34 PM
AT&T
AT&T 12:34 PM
12:34 PM
Scene1
OK
SettingsStyle
Editor Scene
Scene2 Scene3
Scene4 Scene5 Scene6
Scene7 Scene8 Scene9
G255255 255
B50
R
RGB driver scene
AT&T
AT&T 12:34 PM
12:34 PM
Settings
Scene
Scene1 Scene2 Scene3
Scene4 Scene5 Scene6
Scene7 Scene8 Scene9
W WW
10050 50
OK
CT driver sceneDIM driver scene
AT&T
AT&T
Settings
Scene
Scene1
OK
W110
Scene2 Scene3
Scene4 Scene5 Scene6
Scene7 Scene8 Scene9
60
12:34 PM
12:34 PM
WiFi-102 LED Controller manual
LT E C H LT E C H
ZHUHAI LTECH ELECTRONIC TECHNOLOGY CO., LTD. WWW.LTECHONLINE.COM L[email protected]
Tel: [phone] Fax: [phone]
WiFi-102 LED Controller manual
Click on the top right corner to turn on /off the controller. Click on the top left corner to Scene interface to
save the scene

5 6
GR 210128 255
B
Current White
AT&T
AT&T 12:34 PM
12:34 PM
Current White
Deitor
Save
SettingsStyle
Editor Scene Driver
B
G
R
Cancel
Cancel OK
OK
R
G
B
128
210
255
3. RGB driver editing interface
Click “Editor” to RGB driver editing interface in the RGB mode color wheel status, drag the RGB color slider or click the
adjustment key which is above the slider to change the RGB values directly.
drag brightness slider to change the overall brightness, click “Edit “to edit the RGB numerical values
Current White
AT&T
AT&T 12:34 PM
12:34 PM
Current White
Edit
SettingsStyle
Editor Scene
50
GR 210128 255
B
Save
RGB editing interface RGB value editing
dialog box
RGB Slider
Color Increase
Color decrease
RGB value s editing key
AT&T
AT&T 12:34 PM
12:34 PM
Mode Speed Brt
M3
M3
M1
M2
M4
M5
S3
S3
S1
S2
S4
S5
B3
B3
B1
B2
B4
B5
DIY
Save
SettingsStyle
Editor Scene
DIY
Style
Style
Current White
Current White
Delete
Delete
50
GR 255240 81
B
Jump
4. RGB Driver Style interface &DIY interface
(1) M1~M40 represents 40 different changing modes (M1~M3: the default fixed changing modes; M33~M40: DIY
changing modes). Each changing mode has 8 speed level and 8 brightness level. S8 - the fastest speed, B8 - the
brightest light. Click “ play/pause” to suspend or keep playing. the current changing mode.
()2 ” in DIY changing modes (M33~M40 ) to edit the modes. Select color by touching the color wheel. then click anyClick
of the 10 color boxes to fill the current color in the corresponding color box. Click “ delete “ to delete the selected color
box's color, and it will be black. Click” Jump/Gradual” on the upper right to jump or gradual the modes. Click “ play “ or
change the type of DIY changing mode, controller will play all the DIY changing modes immediately. Advised that
choosing speed level S6, brightness level S8 before entering into DIY interface to observe the chosen DIY changing
mode effect.
The DIY changing colors are at most 10 kinds. When less than 10 kinds, the rest color boxes will be the default black.
Take the below images as an example: the sequence of the 10 color boxes is black, red, black, green, black, blue, black,
yellow, black, black, which means choosing 8 colors. If the changing pattern is jump, implement the black, red, black,
green, black, blue, black, yellow jump changing mode. That is red, green, blue, yellow strobe changing mode. If the
changing pattern is gradual, implement the black, red, black, green, black, blue, black, yellow gradual changing mode.
That is red fade out and fade in, green fade out and fade in, blue fade out and fade in, yellow fade out and fade in.
Click “Style” to RGB driver Style interface in RGB mode status
Style interface DIY interface
Mode rolling panel
speed rolling panel
brightness rolling panel
Mode play/pause DIY interface
Gradual
Jump/Gradual
(switch)
DIY style play/pause delete box's color
color box
Tables of RGB Driver Style interface Changing mode:
WiFi-102 LED Controller manual
LT E C H LT E C H
ZHUHAI LTECH ELECTRONIC TECHNOLOGY CO., LTD. WWW.LTECHONLINE.COM L[email protected]
Tel: [phone] Fax: [phone]
WiFi-102 LED Controller manual
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Mode
Static red
Static green
Static blue
Static yellow
Static purple
Static cyan
Static white
RGB skipping
7 colors skipping
White strobe
7 colors strobe
Red Fade out and fade in
Green Fade out and fade in
Blue Fade out and fade in
Yellow Fade out and fade in
Purple Fade out and fade in
Cyan Fade out and fade in
White Fade out and fade in
RGB Fade out and fade in
Red/green gradual alternately
Red/blue gradual alternately
Green/blue gradual alternately
Red/yellow gradual alternately
Green/cyan gradual alternately
Blue/purple gradual alternately
Green/yellow gradual alternately
Blue/cyan gradual alternately
Red/purple gradual alternately
Blue/white gradual alternately
Yellow/purple/can gradual alternately
RGB gradual alternately
Full color gradual alternately
brightness adjustable
brightness adjustable
brightness adjustable
brightness adjustable
brightness adjustable
brightness adjustable
brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
speed/brightness adjustable
Description
5 RGB driver scene interface.
click “Scene” on the RGB driver interface,select any Scene 1 ~ 9, the corresponding Scene changing mode will pop-
up immediately , the mode's parameters are above the screen.
, If it is a dynamic changing mode, click “ play/pause” to suspend or keep playing.
the chosen changing mode.
1 save scene）：
Click “ save “on the interface of RGB color wheel, RGB editor or style
, select any Scene 1 ~ 9, and click “OK”, the Scene name prompt box will pop-up, scene name can be modified, click
“OK” again, the current changing mode will be saved as Scene changing mode; click “cancel” then Cancel the Save
operation.
2 Play scene:）

121
121 121
7 8
6. CT & DIM driver scene interface
AT&T
AT&T 12:34 PM
12:34 PM
Settings
Scene
Scene1 Scene2 Scene3
Scene4 Scene5 Scene6
Scene7 Scene8 Scene9
W WW
10050 50
OK
GR 255255 255
B
AT&T
AT&T 12:34 PM
12:34 PM
Delete
Scence1
Deitor
SettingsStyle
Editor Scene
Scence2 Scence3
Scence4 Scence5 Scence6
Scence7 Scence8 Scence9
Cancel
Cancel OK
OK
Scene3
Please enter the scene name
Please enter the scene name
Parameter values
Empty scene
play/pause (not available)
scene save key
CT driver scene
interface
DIM driver scene
interface
modify the Scene name
1. RGB driver connection diagram
AT&T
AT&T 12:34 PM
12:34 PM
Settings
Scene
Scene1
OK
W60
Scene2 Scene3
Scene4 Scene5 Scene6
Scene7 Scene8 Scene9
scene name
Static scene
DC12V
LN
AC DC
121
121 121
121
121 121
121
121 121
2 CT dimming driver connection diagram:.
3. DIM dimming driver connection diagram
+
RGB three-in-one LED strip
511
511
331
+ +
BB
RR
GG
+
B
R
G
single color LED strip
Two- in -One color temperature led strip
511
511
331
511
511
331
+
B
R
G
511
511
331
121
121 121
121
121 121
121
121 121
121
121 121
121
121 121
121
121 121
121
121 121
121
121 121
121
121 121
121
121 121
121
121 121
121
121 121
www
Power
supply
WiFi-102 LED Controller manual
LT E C H LT E C H
ZHUHAI LTECH ELECTRONIC TECHNOLOGY CO., LTD. WWW.LTECHONLINE.COM L[email protected]
Tel: [phone] Fax: [phone]
WiFi-102 LED Controller manual
Click “scene” on the CT&DIM driver interface, choose any Scene 1 ~ 9, the corresponding Scene changing mode
will pop-up immediately, the mode's parameters are above the screen.
1 save scene）：
Click “ save” on the CT&DIM color wheel interface, select any Scene 1 ~ 9, and click “OK”, the Scene name prompt
box will pop-up, scene name can be modified, click “OK” again, the current changing mode will be saved as scene
changing mode; click “ Cancel”, then Cancel the Save operation.
2 Play scene:）
5. Conjunction diagram
8. Warranty Agreement
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please
ensure it is mounted in a water proof enclosure.
3. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
4. Please check if the output voltage of any LED power supplies used comply with the working voltage of the product.
5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current.
Please also ensure that the cable is secured tightly in the connector to avoid the accidents due to overheat and
poor contact on the wire.
6. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.
7. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
1. We provide lifelong technical assistance with this product:
A 3 year warranty is given from the date of purchase. The warranty is for free repair or replacement and covers
manufacturing faults only.
For faults beyond the 3 year warranty we reserve the right to charge for time and parts.
2. Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
3. Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Ltech shall not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.
4. Any amendment or adjustment to this warranty must be approved in writing by Ltech only.
★This manual only applies to this model. Ltech reserves the right to make changes without prior notice.
7. Attention
DC12V
LN
AC DC
Power
supply
DC12V
LN
AC DC
Power
supply
GR 255255 255
B
AT&T
AT&T 12:34 PM
12:34 PM
Delete
Scence1
Deitor
SettingsStyle
Editor Scene
Scence2 Scence3
Scence4 Scence5 Scence6
Scence7 Scence8 Scence9
Cancel
Cancel OK
OK
Scene1
Please enter the scene name
Please enter the scene name
AT&T
AT&T 12:34 PM
12:34 PM
Scene1
OK
SettingsStyle
Editor Scene
Scene2 Scene3
Scene4 Scene5 Scene6
Scene7 Scene8 Scene9
G255255 255
B50 R
Parameter values
Dynamic scene
Static scene
play/pause (Dynamic scene)
scene save key
scene name
RGB driver scene
interface
Empty scene
modify the Scene name