Ltech WiFi-103 User manual

T3-CCT3-CV
Model: WiFi-103
T1 T2 T3 WiFi-103
www.l tech-led. com

WiFi-103 Technical Parameters:
Output Current:
Max Output Power:
Output Control:
Input Voltage:
4A×3CH Max 12A
144W/288W(12V/24V)
12~24Vdc
Max 100m
Software Technical Parameters:
Android 2.1 or Above, iOS 5.1 or
Above, With the WiFi Function
Android (1.8MB), iOS (5.6MB)
Tool
Free, No Plug-ins
English
Platform:
Single Color, CT, RGB LEDs
1. Product Parameter:
Control Distance:
RGB Change Mode:
Scene Mode:
Operating Temp.:
Dimensions:
Package Size:
Weight (G.W):
Size:
Language:
Category:
Others:
3. Controller Operating Instructions:
Side A Side B
RUN:
LINK:
RX/TX:
The indicator light flashes quickly about 25s during the electric initialization. Flashes once per second
after initialization finished.
The indicator light stays lit when the mobile device connects to WiFi-103, and turns off when disconnect.
The indicator light turns on when WiFi-103 receives or transmits the WiFi data. Turns off in the
free time.
Manufacturer
interface
SSID
code
switch
3.2 Work Status Indicator Instructions:
3.1 Install/Uninstall ANT:
Clockwise to install the WiFi-103 ANT,
counterclockwise to take off.
learning
button
ID Scene
button
Indicator
light
2. Configuration Diagram:
WiFi-103 is a WiFi lighting control system,
LED lighting products by installing the related APP on our iOS or Android mobile devices which support WiFi
connection. Supports connection directly or by router.
consists of APPs and WiFi controller. Controls various types of
RGB 9 Modes, CT 3 Modes
-30℃~55 ℃
L128×W73×H45(mm)
L135×W80×H50(mm)
320g
32 Fixed Modes, 8 DIY Modes
Input Voltage:
Output Voltage:
Output Current:
Output Power:
Remote Distance:
Working Temp.:
Dimensions:
Package Size:
Weight (G.W.):
12-48Vdc
3-46Vdc
CC 350/700/1050mA×3CH
1.05W~48.3W×3CH Max 144.9W
50m (to WiFi-104)
-30℃~55℃
L175×W44×H30(mm)
L178×W48×H33(mm)
150g
T3-CC Receiving Controller (current 3 in 1)
Input Voltage:
Max Current Load:
Max Output Power:
Remote Distance:
5-24Vdc
6A×3CH Max 18A
T3-CV Receiving Controller
-30℃~55℃
L175×W44×H30(mm)
L178×W48×H33(mm)
140g
Working Temp.:
Dimensions:
Package Size:
Weight (G.W.):
90W/216W/432W(5V/12V/24V)
50m (to WiFi-104)
12
Communication
Standard:
2.4GHz Wi-Fi, 802,
11b/g/n Protocol
Dim, CT adjustment, RGB changing 3 in 1 operation, plus DIY programable function. Compatible with T1/T2/T3
RF work.
Note: Receiver is sold seperately.
WiFi-103 LED Controller WiFi-103 LED Controller
www.l tech-led. com

3.3 SSID Number Setting:
Use code switch to set the controller's SSID Number, WIFI-103-SSID-X, X stands for a certain No. ranging
from 0-F, totally 16 options. which means our product could set 16 isolated LAN in the same area. WiFi-103
will initialize with run LED indicator flashing about 25s quickly, each time the SSID NO. is changed. Mobile
devices need to search and connect WiFi again after Initialization finished.
3.4 “Match” Button and “Scene” Button:
Short press “SCENE” button to enter DIY scenes
sequentially, scene mode changes from 1 to 9 then
backwards.
4. The Instructions of APP Software:
4.1 WiFi-103 Software Installation:
Scan following QR code to download and install.
4.2.1 Network Connection Setting
4.2 Software Operating Instructions
Android scan for download
iOS scan for download
RGB scene interface CT scene interface
WiFi-103 support 2 modes: Direct connection as router or connect by additional router.
WiFi-103 Controller Direct Connection as Router :
Enter mobile device's WiFi setting, click the WiFi function,
mobile device search and list the working WiFi controller
automatically (As Figure-1), Click the SSID number to
connect (default is no password).
Apple WiFi connectionAndroid WiFi connection
( )Figure-1
[ Restore Factory Settings ]
Long press “MATCH” button and “SCENE” button simultaneously more than 2 seconds, the machine will
back to the default parameter, including the parameters of changing modes, and network parameters,
WiFi-103 controller restore as directly connect.
34
WiFi-103 LED ControllerWiFi-103 LED Controller
www.l tech-led. com

Delete WiFi-103
controller list
RGB driver mode
Disconnect to
WiFi-103
controller
Network
RGB/CT/DIM driver setting
Change the background
Connect to additional
router TP-LINK1
Workable WiFi-103
Connect to the WiFi-103 controller, the step as (4.2.1)same
Connection with an Additional Router:
Connnect WiFi-103 Controller to The Additional Router Network:
Click “Network” key to enter Network interface(as Figure-3-1), start "connect to exiting LAN", software
will search the workable WiFi net SSID list, choose the specified router to connect (Attn: do not choose
WiFi-103 controller), can add the WiFi-103 controller to the wireless router(as Figure-3-2 the wireless
router TP-LINK1)
C.
( -2-1)Figure
( -3-1)Figure
B.
A.
( -2-2)Figure
D.
Connect an additional router interface
WiFi-103 as a router interface
( -3-2)Figure
Click mobile device's icon to start the software, the software will search and list the working WiFi
controller automatically, and there is a blue wireless icon (as Figure-2-1)
Exit WiFi-103 software, enter mobile device setting-wireless network setting, choose the wireless router
to connect. Device List interface shows as Figure-2-2 when re-open the WiFi-103 software. Completes
the steps to connect to the additional router.
Repeat the ABC steps if you need connecting multiple WiFi-103 controller to this wireless router.
Connect to
WiFi-103
Manual searching the
WiFi-103 controller which
connect to the additional
router
In this connection mode, to avoid the mobile device automatically connect to WiFi-103 after the setting has
completed, please click on the connected WiFi-103 which under the mobile device "WiFi setting" and at the
message box please click "Forget this network" (apple iOS) or "Cancel save" (SUMSUNG mobile phone is
"forget") to cancel the save of WiFi-103 connection.
Attn:
56
WiFi-103 LED Controller
Android cancellation of the save of
WiFi-103 connection
Apple
WiFi-103 connection
cancellation of the save of
WiFi-103 LED Controller
www.l tech-led. com

4.2.2 RGB/CT/DIM Driver Color Wheel Interface:
4.2.3 RGB Linear Toning Interface :
RGB slider
4.2.4. RGB Scene Interface
RGB linear toning
interface
RGB value edited
Scene-save key
RGB value edited
Brightness slider
RGB color wheel
Click to enter linear toning interface in the .RGB mode with color wheel
RGB mode
On/Off
Parameter values
Brightness slider
Currently
selected
color
Color wheel
Driver
Changing mode
Linear Toning
Scene saving
DIY
Driver
interface
Scene
Dimming mode
CT mode
Driver Interface
Parameter values
Long press can change
the background scene
Scene
Long
press
Dynamic scene cycle play
RGB scene interface Scene background editing interface
Scene
78
Modify the scene nameScene saving interface
Can modify the scene name
4.2.5 RGB Save Scene Interface :
On the interface of RGB color wheel,
linear toning, and mode or DIY, click
to the scene-save interface.
WiFi-103 LED ControllerWiFi-103 LED Controller
www.l tech-led. com

4.2.6 CT Mode Interface :
910
Parameter
values
Scene
Save scene
CT mode Scene name
Modify the scene name
Setting
Mode interface
Changing mode selection
Speed slider
Brightness slider
Play/Pause
Scene saving
Mode
4.2.7 RGB Mode Interface :
Static Red
Static Green
Static Blue
Static Yellow
Static Purple
Static Cyan
Static White
RGB Jumping
7 Colors Jumping
White Strobe
7 Colors Strobe
Red Fade Out and Fade In
Green Fade Out and Fade In
Blue Fade Out and Fade In
Yellow Fade Out and Fade In
Purple Fade Out and Fade In
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Tables of Changing Mode:
No. No. Mode Mode
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Cyan Fade Out and Fade In
White Fade Out and Fade In
RGB Fade Out and Fade In
Red/Green Gradual Alternately
Red/Blue Gradual Alternately
Green/Blue Gradual Alternately
Red/Yellow Gradual Alternately
Green/Cyan Gradual Alternately
Blue/Purple Gradual Alternately
Green/Yellow Gradual Alternately
Blue/Cyan Gradual Alternately
Red/Purple Gradual Alternately
Blue/White Gradual Alternately
Yellow/Purple/Cyan Gradual Alternately
RGB Gradual Alternately
Full Color Gradual Alternately
Speed/Brightness AdjustableComment:
On CT interface, select color temperature by
touching color wheel, then click , scene 1~3
start flash, select any one, the scene name
box will pop-up, you can rename the scene.
Click “OK” to save the current color temperature
as a scene; click “cancel” to cancel the save
operation.
After save, select any scene from 1~3 in the CT
interface, the corresponding scene changing
mode will pop-up immediately.
WiFi-103 LED ControllerWiFi-103 LED Controller
www.l tech-led. com

DIY interface
DIY
4.2.8 DIY Interface
For Example:
5. WiFi Network SSID Name and Password Setting
In Device List interface, click “Network” key to enter Network interface, select “Change SSID and Password”
(Click ” ” ) to enter User Setting interface. Typing new SSID name and password
. Click “Apply” key on the top right corner of the interface to save the changes.
(Min. 8 characters, consist
of 0-9, a-z and A-Z)
11 12
1.Device list interface 2.Network interface 3.Change SSID
name interface
In direct connection of the WiFi-103 as a router. Please exit software after changed the SSID name and
the password, then enter the mobile device system setting to reconnect the WiFi-103, In additional wireless
router connection, it only needs to click “ ” in Device List interface to search again the WiFi-103
controller after changed SSID name.
If you forget the WiFi network password, please simultaneously press “MATCH” button and “SCENE”
button more than 2s to restore the factory default settings, so that can delete the WiFi network password
(More details in page 3 [Restore factory settings])
[Attn]:
[Attn]:
4.Change SSID
password interface
Jump/Gradual/Strobe
switching
Color box
Play/Pause
Scene saving
D1-D8 DIY mode Speed selection
Brightness selection
Long press color
box to delete color
Brightness slider
Color wheel
(select the color and saturation)
The sequence for 10 color boxes is black, red, black, green, black, blue, black, yellow, black, black, which means
8 colors was chosen in the above boxes, which is black, red, black, green, black, blue, black, yellow. For jump
type, this lighting effect will be red, green, blue, yellow 4 colors strobe. For gradual type, this lighting effect will
be red fade-in and fade-out, green fade-in and fade-out, blue fade-in and fade-out, yellow fade-in and fade-out.
WiFi-103 LED ControllerWiFi-103 LED Controller
www.l tech-led. com

6. The Remote Operating Instructions
7. Conjunction Diagram:
6.1 The Learning Method of T1/T2/T3 to WiFi-103
6.2 Function Definition of Remote Control Keys
Dimensions:
Package Size:
Weight (G.W):
L145×W55×H22mm
L168×W102×H28mm
235g
T1/T2 T3 Technical Parameters:/
5Vdc
<30mA
2.4GHz
30m
1000mAh
Charging Voltage:
Working Current:
Working Frequency:
RF Remote Distance:
Battery Capacity:
Note: Remote is sold separately.
Attn: Different types of remote learning operation, will change WiFi-103 control mode directly (single color, color
temperature and RGB mode).
Touch circle Touch circle
Brightness
shortcut keys
Brightness keys
Sync status
indicator light
30s delay off key
1 hour delay off key
1-9
Scene-save
keys
On/Off
M1
M2
T1
On/Off
Speed+/Speed-
CT+/CT-
Scene-save keys
CT
shortcut keys
BRT+/BRT-
Sync status
Indicator light
Delay off keys
Brightness
Shortcut keys
T2
Mode keys
Touch color circle
Speed keys
Brightness keys
Sync status
indicator light
On/off
Pause key
Scene-save
keys
T3
14
13
7.1 Connecting with The LEDs
Learning ID:
Cancelling ID:
Short press ID learning button “MATCH” on WiFi-103, buzzer beep once,
long press any key (except “On/Off”) on remote within 5s until the remote
indicator light flashes 3 times (meanwhile the buzzer long beep), means
the controlling between remote and WiFi-103 is activated.
Long press “MATCH” button on WiFi-103 (over 5s) till the buzzer long
beep, means all the remotes learned with WiFi-103 cancelled.
WiFi-103 LED ControllerWiFi-103 LED Controller
www.l tech-led. com

7.3 Connect By a Router
7.2 Diagram of Wireless Slave Control:
16
Add T3-CV/T3-CC if needed.
Method to Sync T3-CV/T3-CC to WiFi-103:
Learning ID:
Canceling ID:
Long press the “SCENE” button on the WiFi-103 controller until the buzzer long
beep (RUN light flash quickly), and then short press the ID learning button on
the T3-CV/T3-CC, the buzzer long beep again. Learning ID successful.
Long press the “SCENE” button on the WiFi-103 controller until the buzzer long
beep twice, cancel all the T3-CV/T3-CC learned with WiFi-103 controller.
15
WiFi-103 LED ControllerWiFi-103 LED Controller
www.l tech-led. com

17 18
9. Warranty Agreement
8.1 The product shall be installed and serviced by the qualified person.
8.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please
mounted in a water proof enclosure.
ensure it is
8.3 Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
8.4 Please check if the output voltage of the LED power supply used comply with the working voltage of the
product.
8.5 Please ensure that adequate sized cable is used from the controller to the LED lights to carry
Please also ensure that the cable is secured tightly in the connector.
the current.
8.6 Ensure all wire connections and polarities are correct before applying power to avoid any damages to the lights.
8.7 If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
9.1 We provide lifelong technical assistance with this product:
A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement if
cover manufacturing faults only.
For faults beyond the 5-year warranty, we reserve the right to charge for time and parts.
9.2 Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
9.3 Repair or replacement as provided under this warranty is the exclusive remedy to the customer. We shall
not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.
9.4 Any amendment or adjustment to this warranty must be approved in writing by our company only.
★ This manual only applies to this model. We reserve the right to make changes without prior notice.
8. Attention
Update time: 2016.10.12
Remote
7.4 Remote Distance Reference
[Attn]: The following distance is measured at open environment, in unopened environment, testing wireless
distance will be reduced. Please refer to the actual test distance before installation.
WiFi-103 LED ControllerWiFi-103 LED Controller
www.l tech-led. com