Ltech DMX-SPI-203 User manual

5
4. M203 Remote:
175mm
44mm
170mm
30mm
RUN
M
1 2
M203 Remote
Remote Remote holder
Controller
60mm
104mm
14mm
63mm
108mm
DMX-SPI-203 Controller:
DMX-SPI-203
LED Controller
DMX-SPI-203 controls LED with the following compatible ICs:
UCS6909, UCS6912, LPD8803, LPD8806, TM1803, TM1804, TM1809, TM1812, UCS1903,
UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, TLS3001, TLS3002, WS2801,
WS2803, WS2811, WS2812, P9813.
LPD6803, LPD1101, D705,
Supporting international standard protocol DMX512/1990 interface, with DMX administration
mode to invoke the built-in functions for choosing mode, speed, brightness, types and
direction changing by DMX512 console. Furthermore, it has the DMX decode mode,
customers could use DMX512 console to program & control every channel of the LEDs
with the compatible ICs listed above. 0-100% dimming range, program any lighting effect
required.
1. Product Parameter:
Control Qty: 1024 Pixels
Working Temperature:
Dimensions: L175×W44×H30(mm)
Package Size: L178×W48×H33(mm)
Weight(G.W.): 130g
: 5~24VdcInput Voltage
Power Consumption: 1W
Output Signal: SPI(TTL)
Change Mode: 540
DMX Channel: DMX Manage Mode: 6CH
DMX Decode Mode: 510CH
-30℃～55℃
(if the lamps are powered individual)
DMX-SPI-203 LED Controller DMX-SPI-203 LED Controller
Total Weight(G.W.): 240g
Working Voltage CR2032: 3V(battery )
Working Frequency: 2.4GHz
Working Temperature: -20℃~55℃
Dimensions: L104×W58×H9(mm)
Weight(N.W.): 42g
Package Dimensions: L228xW156xH35(mm)
2. Product Dimension:
3. Terminal Description:
OLED Screen
Function Keys
5-24V
Power Input Socket
dc
DMX Signal Input
Socket
DMX Signal Output
Socket
LED Lamps
Connection Socket
The Learning Remote Method:
The controller and remote are Pre-synced at
factory. If deleted accidentally, the sync method
is as follows.
Brightness
Type Keys
Direction Keys Scene Keys
Mode/Speed
DMX 29 Mode
(Short press to play scene
long press to save the current scene)
ON/OFF
(Long press to turn ON/OFF the tone)
(Short press to change mode
Long press to adjust speed)
Loop Play
Pause/Play
DMX 30 Mode
Long press "∧" or "∨" button to delete ID, which
cancels the match.
Then Press "∧" or "∨" button to enter remote
learning interface: Press any key on the remote
control to match with the controller.
Firstly, press M Key on the controller to enter the
setting interface. Secondly, press M Key again
to switch to "Remote Match" entry.
(multiple remotes could be synced to one controller):
www.ltech-le d.com
Virtual Pixel:
1-6 times, Max 1024 pixel

3
M
M
M
DMX-SPI-203
DMX-SPI-203
DMX-SPI-203
Setup
Setup
Setup
PixelLength: 256
Remote Study:
Press remote Key
Remote Delete:
Long Press ↑or↓
Keep Pressing
M Key
Simultaneously
Exit
↑or↓
BUZZER: ON
CONTRAST: 100
Exit
DMX ADDRESS: 1
Pixel Mul: 1
Exit
DMX ADDRESS: 1
Exit
Model
Mode
Type
02 RED
JUMP
SPEED: 8 BRT: 100%
29 DMX DECODE ↓
DMX ADDR: 1
30 DMX DECODE 1
Remote Match
Restore Device
System Exit
Remote Match
Restore Device
System Exit
Remote Match
Restore Device
System Exit
Pixel Zoom: 16
CHIP11:TM1809
ORDER: RGB Exit
Display [DMX-SPI-203 Cycle] after 30 mode：Cycle play scene of 1-7.
4
01-28 Mode
29 Mode
30 Mode
DMX-SPI-203 DMX-SPI-203
Table of Changing Modes
In 2~28 modes, you can use the remote control to choose light changing types (JUMP, FLASH, SMOOTH, FADE ,
FLOW, CHASE, METEOR, FLOAT) and light moving directions( ), which compose 540 kinds of
changing modes
DMX-SPI-203 LED Controller DMX-SPI-203 LED Controller
6.1 DMX-SPI-203 as master console: 6.2 Connection with DMX console:
TM1803, TM1804, TM1809, TM1812, UCS1903,
UCS1909, UCS1912, UCS2903, UCS2909, UCS2912,
WS2811, WS2812, TLS3001, TLS3002.
LPD6803, LPD1101, D705, UCS6909, UCS6912
GS8206(BGR), SM16703.
,
LPD8803, LPD8806, WS2801, WS2803, P9813,
6. Wiring Diagram:
Wiring Method Signal Cable Compatible ICs
Two cables
DATA CLK
DATA
Single cable
Power
Adapter
LED Pixel StripLED Pixel Strip
5. OLED Screen Interface Diagram:
Instruction of DMX console in Mode 30
Flashing speed option for mode 1-28
in Mode 30, when connected to DMX console, could use 6 channels to manage color, speed, brightness,
types, direction and flash of all modes.
forward ( ) ,reverse ( ), close ( ), split( )
CH2(0-255):CH2(0-255):
CH3(0-255):
CH4(0-255):
CH5(0-255):
CH6(0-255):
CH1(0-223): CH1(224-255)
CH3(0-255):
CH4(0-255):
Red LED 0-100% dimming
Select 1-28 modes.
Green LED 0-100% dimming.
Blue LED 0-100% dimming.
Adjust changing speed of mode 1-28(8 levels).
Adjust brightness of mode 1-28 (8 levels).
Select 8 changing types of mode 1-28
(jump, flash smooth, fade, flow, chase, meteor, float)
Select 4 changing direction of mode 1-28
Channel Channel
Function Function
Select 29 mode.
Channel Function
st
1 channel 0-255 : Red LED 0-100% dimming( )
0-255(G) : Green LED 0-100% dimming
0-255(B) : Blue LED 0-100% dimming
29
DMX
Decoder
Mode
nd
2 channel
rd
3 channel
Instruction of DMX console in Mode 29
Function
Modes
R
Main Display Interface
Main Display Interface
Main Display Interface
Figure 1
Press "M" key, switch entries.
Press "∧" or “∨" key, adjust parameters.
Long press "M" key, return to
the main display interface(Figure 1).
Exit: Return to the previous menu.
Figure 2 Setting Interface
Setting Interface
Setting Interface
Short press to enter the DMX setting interface;
Short press to enter the DMX setting interface;
Short press to enter the DMX setting interface;
www.ltech-le d.com

DMX-SPI-203 DMX-SPI-203 DMX-SPI-203 DMX-SPI-203 DMX-SPI-203
Artnet-DMX-8
5 6
DA
DA
+
GND
GND
GND
+
6.4 Connected with DMX computer console to realize decoder function:
6.3 LED pixel strip wiring diagram:
b. Light fixtures and controller using different operating voltages.
a. Conventional connection method.
12V
Power supply
dc
5-24V
Power supply
dc
36V
Power supply
dc
DMX-SPI-203 LED Controller DMX-SPI-203 LED Controller
8. Warranty Agreement:
7. Attention:
1. The product shall be installed and serviced by the qualified person.
7. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
6. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the
LED lights.
5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the
current. Please also ensure that the cable is secured tightly in the connector.
4. Please check if the output voltage of the LED power supply used comply with the working voltage of
the product.
3. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure
it is mounted in a water proof enclosure.
1. We provide lifelong technical assistance with this product:
★This manual only applies to this model. LTECH reserves the right to make changes without prior notice.
4. Any amendment or adjustment to this warranty must be approved in writing by LTECH only.
3. Repair or replacement as provided under this warranty is the exclusive remedy to the customer. LTECH
shall not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.
2. Warranty exclusions below:
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement
if cover manufacturing faults only.
Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
Update Time: 2017.07.31
www.ltech-le d.com
Pixel Strip
Pixel Strip
5M
5M
5M
5M
5M
5M
+
++
+
GND
GND GN D
GND
12V
Power supply
dc 12V
Power supply
dc
36V
Power supply
dc 36V
Power supply
dc