Ltech LT-3800-6A User manual

LT-3800-6A
LED RGB Controller
1
1. Technical Specs:
2. Product Size:
LT-3800-6A LED RGB Controller
LT-3800-6A Constant Voltage Controller
Input Voltage: 5～24VDC
Max Current Load: 6A×3CH Max 18A
Max Output Power: 90W/216W/432W(5V/12V/24V)
Changing Mode: 29 Modes
Grey Scale Level: 4096×4096×4096
Dimension: L146×W90×H31(mm)
Package Size: L160×W130×H45(mm)
Weight(G.W.): 470g
Working Temperature: -30 ~65℃ ℃
LT-3800-6A is a multi-function RGB controller with DIY and powerful combination ability for changing
RGB colors of the 4-pin 3-channels (common anode) LED lights. 29 modes can be controlled either
by pressing the keys on the controller or the remote, which is simple and easy.
RF Remote Distance: 30m
LT-3800-6A with the programmable function. 10 seconds to produce a new lighting effect, super
easy and useful.
3. Operation Keys:
3.1 Controller and Remote Instruction
2
Controller Panel Instruction
Power input : 5-24VDC
LED Lamps Connected Socket
R G B V
Status Display
Static State
Color-mixing Button
Static State
Color-mixing Keys
On/Off
Mode
Speed
Remote Control Instruction
On/Off
Mode
Speed
Brightness
Loop Play 5 DIY Modes
Buzzer On /Off
5 Scene-save Key
(merely cycle the dynamic effect,
the static color will be skipped)
5 Scene Loop Play Key
(long press for 2 second can save
the current color or change mode)
Brightness
(long press can increase and
decrease the color continuously)
Play Programmed Mode
(long press to increase or
decrease continuously)
LT-3800-6A LED RGB Controller
ID Learning Method:
Learning ID:
Cancelling ID:
Press “ON” key on the controller for 2s, the buzzer long beep, press any key on
the remote in 5s, the buzzer long beep again, activated.
Press "OFF" key on the controller for 8s, the buzzer long beep, delete all the
learned remote.
Color save key
(long press 2s to save,
short press to display)
One can be matched with max 10 remotes. controller
Remote control has been matched to the before leave factory, if deleted accidentally,
you can learn ID as follow.
controller
(press once to play
press again to switch jumping/smooth strobe)/
www.ltech-led.com

5. Wiring Diagram:
4. Tables of Changing Modes:
3
【Attn】: Power repeater can be added if connect to more LEDs, please refer to the manual of
power repeater for the specific connection method.
Static Red
Green
Static Blue
Static Yellow
Static Purple
Static Cyan
Static White
RGB jumping
7 color jumping
White strobe
Static
7 color strobe
Red fade out and fade in
Green fade out and fade in
Blue fade out and fade in
White fade out and fade in
RGB fade out and fade in
Red/Green color smooth
Red/Blue color smooth
Green/Blue color smooth
Red/Yellow color smooth
Green/Cyan color smooth
Blue/Purple color smooth
Green/Yellow color smooth
Blue/Cyan color smooth
Red/Purple color smooth
Blue/White color smooth
Yellow/Purple/Cyan color smooth
RGB color smooth
7 color smooth
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
No. No. No.
Effect Effect Effect
3.2 :Program Instruction
At least select 2 colors for editing the changing effect, Max. 7 color. If the edited color less than
7 colors, so the last several colors stored as black. Editing the fade in and fade out effect, for
example, Red and Green fade in and fade out, the first color must be black, so the order of 7
colors is Black, Red, Black, Green, Black, Black, Black.
LT-3800-6A LED RGB Controller
When not programming, you can save your favorite colors on P1 - P7 for easy playing.
4
7. Warranty Agreement:
6.1 The product shall be installed and serviced by the qualified person.
7.1 We provide lifelong technical assistance with this product:
★This manual only applies to this model. We reserve the right to make changes without prior
notice.
6. Attention:
7.4 Any amendment or adjustment to this warranty must be approved in writing by our company
only.
7.3 Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
We shall not be liable for any incidental or consequential damages for breach of any stipulation
in this warranty.
7.2 Warranty exclusions below:
For faults beyond the 5-year warranty, we reserve the right to charge for time and parts.
A 5-year warranty is given from the date of purchase. The warranty is for free repair or
replacement if cover manufacturing faults only.
Any man-made damages caused from improper operation, or connecting to excess voltage
and overloading.
6.7 If a fault occurs, please return the product to your supplier. Do not attempt to fix this product
by yourself.
6.6 Ensure all wire connections and polarities are correct before applying power to avoid any
damages to the LED lights.
6.5 Please ensure that adequate sized cable is used from the controller to the LED lights to carry
the current. Please also ensure that the cable is secured tightly in the connector.
6.4 Please check if the output voltage of the LED power supply used comply with the working
voltage of the product.
6.3 Good heat dissipation will prolong the working life of the controller. Please ensure good
ventilation.
6.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors, please
ensure it is mounted in a water proof enclosure.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
Update Time: 2015.03.01
LT-3800-6A LED RGB Controller
www.ltech-led.com