Lumberjack WB1490 Installation manual

WB1490
Solid Wood Bench
WB1490
ORIGINAL INSTRUCTIONS
SAFETY AND OPERATING MANUAL

WB1490
TABLE OF CONTENTS
Welcome to Lumber
j
ack!
Dear Customer, Congratulations on your purchase. Before using the
product for the first time please be sure to read these instructions for use.
They provide you with all information necessary for using the product safely and to
ensure its long service life.
Closely observe all safety information in these instructions!
General Tool Safety Warnings…………………………………………….…......01
Machine Details and Product Features……….…………………………….….02
Assembly/ Purpose……………………………………………………………………..03
Sketch map……………………..…….…………………………………………………….06
Parts List/Parts Diagram……………………………………….………………..……08

WB1490 01
GENERAL TOOL SAFETY WARNINGS
WARNING Read all safety warnings and
all instructions.
Failure to follow the warnings
and instructions may result in serious injury.
Save all warnings and instructions for
future reference.
a) Do not exceed weight capacities for the
Workbench shelves and drawers. Be aware of
dynamic loading! Sudden load movement may
briefly create excess load causing product
failure.
b) Use only on flat, level and hard surface
capable of supporting the Workbench and any
item(s) placed on Workbench. Evenly distribute
load on Table to avoid tipping.
c) Use as intended only. Do not use Workbench
to perform task for which it was not designed.
d) For indoor use only.
e) Assemble only according to these instructions.
Improper assembly can create hazards.
f) Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly and
use.
g) Keep assembly area clean and well lit.
h) Keep bystanders out of the area during
assembly.
i) Do not assemble when tired or when under
the influence of drugs or medication.
j) This product is not a toy. Do not allow children
to play with, on or near Workbench.
k) Inspect before every use; do not use if parts
are loose or damaged.

WB1490 02
MACHINE DETAILS AND PRODUCT FEATURES
Product Details
Specifications:
Vice capacity:7 Inch
Top shelf weight capacity:113kg
Drawer weight capacity:11kg
Bottom shelf capacity:90kg
Drawer inside dimensions:
L 320mm X W 315mm X H 70mm
Dimensions (Includes vice):
L 1490mm X W 620mm X H 860mm
Parts
1. Boarding X 1
2. Boarding X 1
3. Leg X 2
4. Clapboard X 1
5. Course of Drawer X 2
6. Table Top X 1
7. Drawer X 1
8. Vice X 2
9. Bolts X 4
10. Bolt Use Connect 1 & 2 & 3 X 4
11. Bolt Use Connect 3 & 6 X 4
12. Screw X 20
13. Hexangular of Wrench X 1

WB1490 03
ASSEMBLY INSTRUCTIONS
Assembly
1、Put two legs (3) on the floor and
linked by a boarding (1).
2、Put the clapboard (4) into gap on the
leg both side.
3、Put the table top on the floor, and
overturn the leg on the table top. Use the
screw (12) peg the course (5).
4、Put the drawer (7) into the course (5).

WB1490 04
ASSEMBLY INSTRUCTIONS/PURPOSE
5、Pick up the vice, use three column cut
in the three holes, and circum gyrate the
handle.
6、Place the anvil pegs in the holes on
the table top as shown.
Purpose
1、Bolts and vice can grip the board.
2、Only use vice grip the board.
3、Use four bolts grip the board.

WB1490 05
SKETCH MAP

AIR6V 01AIR6V 01AIR6V 01
WB1490 06
No. Description No. Description
1 Boarding 6 Drawer
2 Boarding 7 Vice
3 Leg 8 Bolts
4 Clapboard 9 Wood Peg
5 Table Top
PARTS LIST/ PARTS DIAGRAM