LUX LUMEN StarPoint User manual

StarPoint
2° version
Order code: 10702

StarPoint 2° LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.2/16
T: [phone] –www.lux-lumen.com
CONTENTS
1PICTURE..................................................................................................................... 3
1.1 GENERAL .................................................................................................................................... 3
2DIMENSIONS ............................................................................................................. 4
3SAFETY INFORMATION ........................................................................................... 5
3.1 SYMBOLS .................................................................................................................................... 5
3.2 PROTECTION FROM ELECTRIC SHOCK ......................................................................................... 6
3.3 PROTECTIONS FROM FIRE AND BURNS ........................................................................................ 6
3.4 PROTECTION FROM INJURY......................................................................................................... 7
3.5 DISPOSING OF THIS PRODUCT ..................................................................................................... 7
4PHYSICAL INSTALLATION........................................................................................ 8
4.1 UNPACKING ................................................................................................................................ 8
4.2 MOUNTING ................................................................................................................................. 8
4.3 LOCATION AND ORIENTATION...................................................................................................... 8
5EXTERNAL CONNECTIONS....................................................................................... 9
5.1 DC POWER INPUT ....................................................................................................................... 9
6EMC AND SAFETY REQUIREMENTS ...................................................................... 10
7INSTALLATION SETUP............................................................................................ 11
7.1 SPECIFICATION ......................................................................................................................... 11
8SERVICE AND MAINTENANCE ............................................................................... 12
8.1 SAFETY PRECAUTIONS .............................................................................................................. 12
8.2 CLEANING ................................................................................................................................. 12
9WARRANTY.............................................................................................................. 13
9.1 APPLICATION OF WARRANTY..................................................................................................... 13
9.2 RMA PROCEDURE..................................................................................................................... 15
10 LIST OF USED ABBREVIATIONS ............................................................................. 16

StarPoint 2° LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.3/16
T: [phone] –www.lux-lumen.com
1Picture
1.1 General
StarPoint 2°
StarPoint 2° on bracket with snoot

StarPoint 2° LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.4/16
T: [phone] –www.lux-lumen.com
2Dimensions

StarPoint 2° LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.5/16
T: [phone] –www.lux-lumen.com
3Safety information
Before installing, powering up, or servicing the StarPoint led-unit, it is highly
recommended that you read this manual and ensure yourself that you
completely understand its content. Observe the safety precautions in this
manual. Install and operate the led-unit only as described in this manual,
and in conformity with local regulations. If you have any questions how to
operate this product safely, please contact your point of sale.
3.1 Symbols
Following symbols are used to identify important safety information on the
product and in this manual.

StarPoint 2° LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.6/16
T: [phone] –www.lux-lumen.com
3.2 Protection from electric shock
Although this device itself does not operate with dangerous voltages, the
installation in which is intended to be used, can contain dangerous voltages.
Shut down the power of the complete installation before carrying out any
installation, or maintenance work.
Use only AC to DC power sources, suitable for the application, and conform
to local regulations. Please ensure yourself that the AC to DC power supply
is able to deliver the rated current requirements of the installation.
If any cable, seal or housing is damaged, cracked, or reformed, disconnect
the power of the installation immediately.
For any additional servicing, not described in this manual, please contact
your point of sale.
3.3 Protections from fire and burns
Do not operate this led-unit if ambient temperature is over 45 °C (113 °F).
Please ensure yourself that sufficient ventilation around the led-unit is
possible.
It might be necessary to allow the led-unit to cool down for 5 minutes,
before servicing.
Do not modify the led fixture, in a way, not described in this manual.

StarPoint 2° LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.7/16
T: [phone] –www.lux-lumen.com
3.4 Protection from injury
Ensure yourself that the led-unit and all its accessories are securely
fastened. Verify that the led-unit is firmly fixed to its supporting
underground.
3.5 Disposing of this product
This led-lighting device is manufactured in compliance with directive of the
European community: waste electrical and electronically equipment. Please
help to preserve our environment and ensure that this product will be
recycled properly at the end of its life.

StarPoint 2° LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.8/16
T: [phone] –www.lux-lumen.com
4Physical installation
Thank you for selecting this StarPoint 2° led-unit as best solution in your
setup.
Warning! Read the safety precautions in this manual before integrating this
led-unit into your installation.
Installation must be carried out by qualified professionals only.
Assure yourself that there is sufficient and unrestricted air flow around the
StarPoint led-unit.
4.1 Unpacking
The following items are included in your package:
•led fixture with focussing bracket and snoot
•Protective antistatic packaging, with short form manual
4.2 Mounting
Surface mounting
The StarPoint led-unit can be mounted on all kind of non combustible
materials but take in consideration that the module can have a Tc of approx
30 °C higher as ambient temperature.
In case of problems, or doubts, please contact your point of sale.
Track mounting (on demand)
The StarPoint led-unit can be equipped with a track adaptor in order to be
installed easily on 24 VDC track systems.
4.3 Location and orientation
This led-unit can be used in all directions.

StarPoint 2° LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.9/16
T: [phone] –www.lux-lumen.com
5External connections
5.1 DC power input
Safety precautions
Never connect the live power on the input terminals of the StarPoint led-
unit!
In case of doubts, contact your point of sale.
Polarity
The StarPoint led-unit is polarity sensitive. So observe polarity and cabling:
•Black inner 1 = positive
•Black inner 2 = negative
Improper connection might damage the StarPoint led-unit and power
supply permanently. In case of inversed polarity, the warranty is void.
Power supply: Rated voltage
The rated input voltage range of the StarPoint led-unit is 24 VDC. Due to the
use of a step-down convertor, integrated in the housing, a highly efficient
system is created.
Cable
Please ensure yourself that the cable end is watertight sealed at the
connection. If this is not properly done, water can pass through the inner
conductors of the cable and damage the internal electronics of the
StarPoint led-unit.

StarPoint 2° LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.10/16
T: [phone] –www.lux-lumen.com
6EMC and safety requirements
The StarPoint led-unit is fully compliant to the LVD and EMC directive of the
European council, if used in a properly designed setup.
The StarPoint led-unit is only intended to be used in lighting applications,
and as such, the complete assembly of led-unit and power supply needs to
be fully compliant with following harmonized standards:
LVD requirements of the power supply
•EN 60598: general requirements of lighting equipment.
EMC requirements of the power supply
Immunity according to:
•EN 61547:2009 (General EMC immunity requirements lighting eq.)
•EN 61000-4-1:2006 (General immunity testing techniques)
•EN 61000-4-2:2008 (ESD immunity test)
•EN 61000-4-3:2006 + A1:2007 (Radiated immunity test)
•EN 61000-4-4:2004 (Fast transients and burst immunity)
•EN 61000-4-5:2005 (Surge immunity test)
•EN 61000-4-6:2008 (Conducted immunity test)
•EN 61000-4-8:1993 (Magnetic field immunity test)
•EN 61000-4-11:2004 (Voltage variations immunity test)
•EN 61000-6-1:2005 (Generic standards for immunity)
Emission according to:
•EN 61000-3-2:2005+A1:2008+A2:2009 (Harmonics emission
test<16A)
•EN 61000-3-3:2008 (Flicker+ voltage changes limits< 16A)
•EN 55015:2006+A2:2009 (Conducted + radiated emission lighting
equipment)
To achieve this compliance, a proper power supply must be supplied. In
case of doubts, contact your point of sale.