Madison Park Tyley User manual

Important safety instructions：
• Please read carefully all instructions before assembling.
• For your safety and ease,assembly by two or more adults is recommended.
• Keep instructions for future use.
Pre-assembly：
Parts List
Item
Description DRAWING QTY
P1
Front Legs 2
P2
Back Legs 2
P3
Left Arm 1
P4
Right Arm 1
P5
Back Fram 1
P6
Seat Fram 1
Hardware List
Item Description DRAWING QTY
H1
Bolts
φ5/16*55mm 12
H2
Lock Washers
φ5/16"
12
H3
Flat Washers
φ5/16"
12
H4
Allen Wrench
φ5/16"
1
H5
Silicone Pad 4
H6
Plastic Washer 4
Assemble Procedures:
Step 2.Install the Arms(P3,P4) to the back(P5) frame as bellow pictures.
Step 3.Push the Seat frame(P6) into the Back frame(p5) as bellow picture.
ASSEMBLY INSTRUCTIONS
Description：Tyley Accent Chair
• Do not discard any content until assembly completed to avoid accidentally discarding small parts or
• Take out all parts and hardwares from box .
Step 1.Assemble the chair on a flat,soft surface such as carpet or cloth to prevent scratching the finish.Take out four legs
and hardwares from the box.
X12 X12 X12 X1 X4 X4
P3 P
P5 P5
P4
P5
P3 P4
P5
P6
Page 1 of 2

Step 7.Level the chair and place the chair upright on a level surface. Assembly is complete.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY.ALWAYS CHECK TO ENSURE
THAT ALL HARDWARE IS KEPT TIGHTENED.
Thank you for your purchase
Step 4. Attach the Seat frame(P6) to the Back fram(P5) by using lock washer(H2),flat washer (H3) . Then tighten the bolts
with allen wrench (H4).
Step 5. Attach the Left arm(P3)&Right arm(P4) by using lock washer(H2),flat washer (H3) .,bolt( H1).Then tighten the bolts
with allen wrench (H4).
Step 6.Screw in the Front leg (P1)&Back leg(P2) to seat frame by using silicone pad (H5) , plastic washer (H6) for each.
Screw tight to the right angle as bellow picture.
H1
H2
H3
H4
P6
P3
P4
P6
P6
P3
P4
P1
P1
P2
P2
P1 P2
H5
H6
H5
H6
Page 2 of 2