Mahindra 700676 User manual

1
READ&FOLLOWALLSAFETYRULES&INSTRUCTIONSBEFORE
OPERATINGYOUREQUIPMENT
106912_EN N-04
*ASSEMBLY *REPAIRPARTS
*OPERATION *MAINTENANCE
106912
700676GrassCollector

2
LIMITED WARRANTY
Conditions and Products Covered:
BERCOMAC guarantees any part of the product or accessory
manufactured by BERCOMAC and found in the reasonable
judgment of BERCOMAC to be defective in material and or
workmanship will be repaired or replaced by an authorized
dealer without charge up to our maximum labor rates and pre-
established times. For replacement parts only standard ground
freight services are covered. This warranty applies to the
products bought and used in North America.
Warranty Period
(from date of the original retail purchase)
Residential, light commercial or regular commercial
(agricultural) use: 2 years
Heavy commercial, professional or rental use: 90 days
Exceptions Noted Below; the following items have a different
coverage conditions and limited time:
Tire Chains:
o90 days, residential or light commercial use
oNo warranty for regular commercial, heavy
commercial, professional or rental use.
Engines: Will vary as per the manufacturer
Please refer to the engine manufacturer’s warranty
statement included with the unit. BERCOMAC is not
authorized to handle warranty adjustments on engines.
Items and Conditions NOT Covered:
This warranty does not cover the following:
Pick-up or delivery charges or in-home services fees.
Any damage or deterioration of the unit, parts and or finish
of these due to normal use, wear and tear, or exposure.
Cost of regular use or maintenance service or parts, such as
gas, oil, lubricants, tune-up parts, and adjustments.
Any part or accessory which has been altered, modified,
misused, neglected, accidentally damaged or not properly
installed, maintained, stored or repaired not in accordance
withtheinstructionsintheowner’smanual.
Repair due to normal wear and or any wear items such as
shear pins, bolts, belts, winch cable, cutting edge, skid
shoes, bearings, etc.
Expedited freight fee services for replacement parts.
Shear bolts and shear pins are to be considered as a
preventive measure not as an assured protection, any
damages resulting from the lack of shear bolts breakage are
not covered.
NOTE: All warranty work must be performed by an authorized
dealer using original (manufacturer) replacement parts.
Owner’sResponsibilities:
BERCOMAC’s defective equipment or part must be returned
to an authorized dealer within the warranty period for repairs.
In the event that defective merchandise must be returned to
manufacturer for repairs, freight fees are prepaid and a written
authorization from BERCOMAC must be obtained by dealer
prior to the shipment. This warranty extends only to
equipment operated under normal conditions. To validate a
warranty claim, it is the user’s responsibility to maintain and
service the unit as specified in theowner’smanualortohave
the unit serviced at their dealer at their expense.
General Conditions:
The sole liability of BERCOMAC with respect to this warranty
shall be strictly and exclusively repair and replacement as
mentioned herein. BERCOMAC shall not have any liability for
any other costs, loss or damage, including but not limited to,
any incidental or consequential loss or damage.
Taking advantage of the warranty does not in any way extend
the length or renewal of the warranty.
In particular, without being limited to, BERCOMAC shall have
no liability or responsibility for:
Travel time, overtime, after hours time or other
extraordinary repair charges or relating to repairs and or
replacements outside of normal business hours.
Rental of like or similar replacement equipment during the
period of any, repair or replacement work.
Any communicating or travel charges.
Loss or damage to person or property other than that
covered by the terms of this warranty.
Any claims for lost revenue, lost profit or any similar costs
as a result of damage or repair.
Attorney’sfees.
BERCOMAC’sresponsibility in respect to claims is limited to
making the required repairs or replacement without charge up
to our maximum labor rates and pre-established times and no
claim of breach of warranty shall be cause for cancellation or
rescission of the contract of sale of any product or accessory.
In no event shall recovery of any kind be greater than the
amount of the purchase price of the product sold.
This warranty gives you specific legal rights. You may also
have other rights, which vary from state to state.
NOTE: Bercomac reserves the right to change or improve the design of any part or accessory without assuming any obligation to modify
any product previously manufactured.
Instructions for Obtaining Warranty Services: Contact the Mahindra dealer where equipment was purchased or any other Mahindra
service dealer to arrange service at their dealership. To locate a dealer convenient to you, access our website at
www.mahindrausa.com. Don't forget to bring your proof of purchase (sales receipt) to the Mahindra dealer.
Revised 25-04-2013

3
TABLEOFCONTENTS
INTRODUCTION ...................................................................................................................................................... 1
SAFETYPRECAUTIONS....................................................................................................................................... 2
SAFETYDECALS .................................................................................................................................................... 4
ASSEMBLY
Toolsrequired ............................................................................................................................................... 5
Step1Preparingthegrasscollector ......................................................................................................... 6
Step2Installingtheaccessories................................................................................................................ 7
OPERATION
Operatingthegrasscollector...................................................................................................................... 9
MAINTENANCE
Lubrication................................................................................................................................................... 10
Replacingthebelt....................................................................................................................................... 10
DISMOUNTINGANDSTORAGE ............................................................................................................................. 11
TROUBLESHOOTING.............................................................................................................................................. 12
PARTSBREAKDOWNANDPARTSLIST
GrassCollector ............................................................................................................................................ 13
TORQUESPECIFICATIONTABLE ........................................................................................................................ 19
OPTIONS&ACCESSORIES.................................................................................................................................. 20
PAGE
iii

1
INTRODUCTION
TO THE PURCHASER
This new accessory was carefully designed to give years of dependable service. This manual has been provided to
assist in the safe operation and servicing of your attachment.
NOTE: All photographs and illustrations in the manual may not necessarily depict the actual models or attachment, but
are intended for reference only and are based on the latest product information available at the time of publication.
Familiarize yourself fully with the safety recommendations and operating procedures before putting the machine to
use. Carefully read, understand and follow these recommendations and insist that they be followed by those who will
use this attachment.
THIS SAFETY ALERT SYMBOL IDENTIFIES AN IMPORTANT SAFETY MESSAGE IN THIS
MANUAL THAT HELPS YOU AND OTHERS AVOID PERSONAL INJURY OR EVEN DEATH.
DANGER, WARNING, AND CAUTION ARE SIGNAL WORDS USED TO IDENTIFY THE LEVEL OF
HAZARD. HOWEVER, REGARDLESS OF THE HAZARD, BE EXTREMELY CAREFUL.
DANGER: Signals an extreme hazard that will cause serious injury or death if recommended precautions
are not followed.
WARNING: Signals a hazard that may cause serious injury or death if the recommended precautions are
not followed.
CAUTION: Signals a hazard that may cause minor or moderate injury if the recommended precautions are
not followed.
Record your attachment serial number and purchase date in the section reserved below (there is no serial number on
the subframe). Your dealer requires this information to give you prompt, efficient service when ordering replacement
parts. Use only genuine parts when replacements are required.
If warranty repairs are required please present this registration booklet and original sales invoice to your selling dealer
for warranty service.
This manual should be kept for future reference.
Please check if you have received all the parts for your kit with the list of the
bag and the list of the box.
SERIAL NUMBER : ___________________________
(IF APPLICABLE)
MODEL NUMBER: ___________________________
PURCHASE DATE : ___________________________

2

3

4
REPLACEIFDECALSAREDAMAGED
SEEPARTSBREAKDOWNFORDECALLOCATION
SAFETYDECALS
Symbol Description
Decal#105127
Toavoidseriousinjury:
Keep hands out of this discharge chute while the vehicle's engine is
running.
Decal#105128
Toavoidseriousinjury:
Keephands,feet&clothingaway.
Donotattempttoinstallorremovedrivebeltwithoutreadingtheowner’s
manual.
Alwaysusethegrasscollectorwithalltheguardsinplace.
Decal#106859
Toavoidinjury:
Keepthelidclosedwhenthevehicle'sengineisrunning.
Decal#106860 Toavoidseriousinjury:
Before installing or using the accessory, locate, read and make sure to
understand owner’s manual of the mower, the vehicle and the grass
collector.
Beforestartingout,makesurethattheflexibletubeissecurelyattachedat
bothends.
Keepawayfromthemowerandthecollectorinoperation.
Neverputhandsorfeetunderthemowerorthecollector.
Before using the mower and the grass collector, remove the area of any
objectswhichcanbeprojected.
Donotallowanyonetorideonthemower.

5
ASSEMBLY
IMPORTANT:UNLESSOTHERWISESPECIFIEDTORQUEALLBOLTSACCORDINGTOTORQUE
SPECIFICATIONTABLE.REFERTOPARTSBREAKDOWNSECTIONFORPARTIDENTIFICATION.
ASSEMBLYINSTRUCTIONS
NOTE:Inthismanual,therightandleftsideisdeterminedbysittingonthevehiclelookingforward.
Removethegrasscollectorandallothercomponents
fromthewoodenbox.
TOOLSREQUIRED:
Ratchet
Socket:7/16’’,1/2’’,5/8’’
Wrench:7/16’’,5/8’’,11/4”
Note:Thisgrasscollectorwasdesignedtobeusedonastandardcategory1three-pointhitchortheMahindra
Expresshitch.
Chute
Flexibletube
Beltguard
Fanframe
Adaptorkit
Deflector
Coverframe
Cover
Retaining
strip
Rubberseal
Frame
Bag

6
ASSEMBLY
STEP1
PREPARINGTHEGRASSCOLLECTOR
Install the chute (item 1) on the blower (item 2), as
shown, withfourcarriagebolts 5/16’’x 3/4’’ (item 3),
four flat washer 7/16’’ (item 4) (between blower and
chute), four flat washer 3/8’’ (item 5) and fournylon-
insertlocknut5/16’’(item6).
Tightenjustenoughsothatthechuterotatesfreely.
Installthechute
THEBLOWER:
THEBAGSUPPORT:
Install parking stands (item 1), (longest part towards
the back as shown), with two hex. bolts 7/16’’ x 2
1/4’’(item2)andtwonylon-insertlocknut7/16’’(item
3).
Tighten just enough to allow parking stands to pivot
freely.
Secure the parking stands in standing position with
two pins 7/16” (item 4) and two hairpins 3mm (item
5).
Installtheparkingstands

7
ASSEMBLY
Thelengthofthetubehastobeadjustedaccording
tothetractormodelandtheuseofaMahindra
Expresshitchornot.
Cut the tube, with a pair of scissors and cutters to
specifiedlengthasshowninthechart.
Putthebagsupportonit’sparkingstands.
Remove the packing bracket (item 1), discard to
allowthecovertoopen.
Reinstall the hex. bolts 1/4’’ x 3/4’’ (item 2), the flat
washer5/16’’andtheflangenut1/4’’(item3).
Open the lid and install the three bags with the
smoothsidefacingforward.
THEFLEXIBLETUBE:
Vehicle
Withthe
Expresshitch
Withoutthe
Expresshitch
Max22et25 71’’ 69’’
Max28XL 72’’ 70’’
16series 78’’ 76’’
STEP2
INSTALLINGTHEACCESSORIES
THEBLOWER:
Install the blower on the mower deck following the
instructionsintheadaptorkits.
Removethepackingbracket

8
ASSEMBLY
THEBAGSUPPORT
Attach the bag support on the tractor’s 3 point hitch.
Remove the sleeve (item 1) from the upper pin if
installedonaconventional3pointhitch.Ifitisinstalled
ontheExpresshitch,leavethesleeveinplace.
CAUTION:Toavoiddamagetothevehicleortothe
accessory,oncetheframeisinstalledandsecuredon
thevehiclehitch,placetheparkingstands(item2)in
theraisedposition,asshown.
Installthebagsupport
Attachtheflexibletube
Attachtheflexibletubetotheframeandtothemower
deckwiththequickreleasefasteners(item1).

9
OPERATION
WARNING
Read the tractor’s owner’s manual carefully. Be
thoroughly familiar with the controls & proper
use of the accessory. Know how to stop the
accessory&disengagethecontrolsquickly.
Use extra care in operation. Thisattachment can
changestabilityofthevehicleinoperationandin
static conditions. Check brake operation prior to
any use. Adjust and repair any problem before
using.
DANGER
-Donot try tounblock thefan or the chute when
thevehicle'sengineisinoperation.
-DisengagetheP.T.O.
-Lowerthemowerdecktothegroundandapplythe
parkingbrakes.
-
STOPTHEENGINEANDREMOVETHEKEY!
-Wait30secondstomakesureallthemovingparts
havestoppedmoving.
-Always usea cleaningtool(awooden stickthat
isatleast3feetlongminimum)
NEVERUSEYOURHANDS.
WARNING
TOAVOIDINJURIES:
-Alwayswearprotectiveearmuffs,safetymaskand
safetyglasseswhenoperatingtheaccessory.
-Never use the grass collector without all the
guards, the chute and the flexible tube correctly
installed. The cover must be closed, the deflector
installedandthebagsmustbeinstalled.
-Ifduringtheoperation,ananomalyoccurs(loss
of part, breakage, tube stands, etc..), Stop the
vehicleimmediatelyandrectifythesituation.
OPERATINGTHEGRASSCOLLECTOR
The grass collector is started at the same time as the
mowerdeck.Refer to the mower deckandthevehicle
owner’smanualstofamiliarizeyourselfwiththecontrols
andsafetyprecautions.
Dangerzone
CAUTION
TOAVOIDDAMAGETOTHEACCESSORYORTO
THEVEHICLE:
Makesuretheparkingstandsareraisedwhenthe
grasscollectorisinstalledonthevehicle.
HeightoftheFrame
If applicable, block the three point hitch’s lowering
systemtopreventtheframefromrubbingontheground
whileensuringthemowerdeckfunctionsadequately.
Adjustmentstopper
DANGER
DANGERZONE
To avoid injuries, make sure that nobody is
within a 5m(17’) radius when the tractor is in
operation.

10
MAINTENANCE
CAUTION
TOAVOIDINJURIES:
Stopthevehicle'sengine.
Applytheparkingbrakes.
Removetheignitionkey.
MAINTENANCE
a) Checkmountingboltsatfrequentintervalsforproper
tightness to be sure equipment is in safe working
condition.
b) Nevergetunderthegrasscollectorwhenitisraised
offtheground.
c) Verify before each use the wear on the chute, the
flexible tube, grass filter, the deflector, the belt and
therubberjoint.Replacethepartswhenrequired.-
LUBRICATION
Always clean the grease fitting before inserting any
grease.
Lubricate the tensioner’s pivot every 50 hours of use
withanallpurposeSAElithiumbasedgrease.
Lubricatealltheotherpivotingpoints.
REPLACINGTHEBELT
Followtheprocedureintheadaptorkits.

11
ENDOFSEASONSTORAGE
a) Cleanandpaintallpartsfromwhichpainthasworn.
b) Take a note of the parts to be replaced for next
season.
c) Storethecomponentsinadryplace.
d) FollowtheinstructionsintheLubricationsection.
DISMOUNTING&STORAGE
Followtheproceduressuppliedwiththeadaptors
forthegrasscollector
-Removethebeltguards,beltguardsupportsandthe
belt.
-Reinstallthemowerdeck’soriginalpulley.
-Reinstalltheprotectionchuteandtheoriginalbelt
guardsuppliedwiththemowerdeck.
DISMOUNTINGTHEMOWERDECK’S
BLOWER
WARNING
Toavoidinjurieswheninstallingoriginalpartson
the mower deck, make sure to respect all the
mower deck assembly specifications and follow
alltheinstructionsinthemowerdeckmanual.
DISMOUNTINGTHEMOWERDECK
LEAVINGTHEBLOWERINSTALLED
Refertotheoperator’smanualforthemowerdeck.
Removetheflexibletubefromtheblower’schute.
Unfoldtheparkingstands.
Secure the parking stands in standing position with
twopins7/16”andtwohairpins3mm.
Placetheframeonthegroundandremoveitfromthe
threepointhitchsystem.
DISMOUNTINGTHEGRASSCOLLECTOR
CAUTION
TOPREVENTINJURIES:
Park the vehicle on a flat surface in a well
ventilatedarea.
DisengagethePTO.
Applyparkingbrake.
Stoptheengineandremovethekey.
Wait until all moving parts have stopped before
leavingthedriver’sseat.
Usewheelchocks.
Note:Whengrasscollectoristobestoredfora
periodoftime,cleanitthoroughly,removealldirt,
grass,leaves,etc.Storeinaclean,dryplace.
WARNING
Remove grass and leaves from the grass
collector after each use to eliminate the risk of
spontaneouscombustion.

12
TROUBLESHOOTING
*Pleaserefertopartsbreakdownsectionforpartsidentification
PROBLEM POSSIBLECAUSES CORRECTIVEACTION
Blowervibratesoris
abnormallynoisy.
Damagedpulley Replacepulley
Damagedbearing Replacethebearing
Fanisdamaged Removeandstraightenorreplacethefan.
Beltisdamaged Replacethebelt.
The blower does not push
thegrasstowardsthebags.
Thechute,thefanortheflexible
tubeareblocked.
Dislodge the obstruction with the help of a
stick.
Beltshowsprematurewear Notenoughtensiononthebelt. Makesurethespringinisgoodcondition.
Nottheoriginalbeltinstalled. Installanoriginalbelt..
Beltissnapping,shredding,
burningorworninaspecific
place.
Thereisnotenoughtensionon
thebelt:
-thebeltiswornwhichis
causingaslack.
-thespringiswornout
-thetensioner’spivotisnot
welllubricated.
Replace the belt or the spring. Grease all the
pivotingpoints.
Imperfectionsinthepulleys Replacethepulleys.
Thebeltrubsonabeltguide Repositionthebeltguide.
Thechuteblockseasily. Thegrassiscuttoolong. Adjust the mower deck to the highest position
for the first cut, then lower the mower for a
secondcut.
Thegrassistoohumid. Waitforthegrasstodryout.

13
PARTSBREAKDOWN
GRASSCOLLECTOR

14
PARTSLIST
GRASSCOLLECTOR
Ref.
Réf.
Englishdescription Descriptionfrançaise
Qty.
Qté.
Part#
Pièce#
1Framewithsafetydecals Châssisavecdécalquesdesécurité 1 106893
2Blowerhitch Attachedelasouffleuse 1 106872
3Fan Éventail 1 106873
4Tensioner Tensionneur 1 106874
5Beltguardwithsafetydecal Garde-courroieavecdécalquedesécurité 1 106895
6Beltguide Guide-courroie 2 106878
7Sleeve Douille 1 102460
8Spacer Espaceur 1 106879
9Flatpulley Poulieplate 2 102839
10 Vpulley PoulieenV 1 102766
11 Vpulleywithsetscrews PoulieenVavecvispressions 1 106867
12 Flangette Flangette 4 102213
13 Bearingwithsetscrew Roulementàbillesavecvisàpression 2 102755
14 Rubbergrommet Oeilletdecaoutchouc 2 106563
15 Spring Ressort 1 102152
16 Knob Bouton 1 106861
17 Chute Goulotte 1 106865
18 Quick-releasefastener Attacherapide 2 106896
19 Pin Goupille 2 103580
20 Hairpin2.5mm Goupilleàressort2.5mm 2 102013
21 Key1/4"x1/4"x1.000" Clé1/4"x1/4"x1.000" 1 102017
22 Hex.bolt1/4"n.c.x1"GR5 Boulonhex.1/4"n.c.x1"GR5 1O/L
23 Hex.bolt5/16"n.c.x1/2"GR5 Boulonhex.5/16"n.c.x1/2"GR5 7O/L
24 Hex.bolt3/8"n.c.x13/4"GR5 Boulonhex.3/8"n.c.x13/4"GR5 2O/L
25 Hex.bolt3/8"n.c.x2"GR5 Boulonhex.3/8"n.c.x2"GR5 1O/L
26 Hex.bolt3/8"n.c.x21/2"GR5 Boulonhex.3/8"n.c.x21/2"GR5 1O/L
27 Carriagebolt5/16"n.c.x3/4"GR5 Boulonàcarrosserie5/16"n.c.x3/4"GR5 8O/L
28 Flangenut1/4"n.c. Écrouàbride1/4"n.c. 1O/L
29 NylonInsertlockNut1/4"n.c. Écrouàgarnituredenylon1/4"n.c. 1O/L
30 NylonInsertlockNut5/16"n.c. Écrouàgarnituredenylon5/16"n.c. 4O/L
O/L=ObtainLocally

15
PARTSLIST
GRASSCOLLECTOR
Ref.
Réf.
Englishdescription Descriptionfrançaise
Qty.
Qté.
Part#
Pièce#
31 NylonInsertlockNut3/8"n.c. Écrouàgarnituredenylon3/8"n.c. 4O/L
32 Nyloninsertlocknut5/16"n.c.(thin) Écrouàgarnituredenylon5/16"n.c.(mince) 4O/L
33 Flatwasher#10hole Rondelleplate#10trou 4O/L
34 Flatwasher1/4"hole Rondelleplate1/4"trou 1O/L
35 Flatwasher3/8"hole Rondelleplate3/8"trou 4O/L
36 Flatwasher7/16"hole Rondelleplate7/16"trou 6O/L
37 Lockwasher5/16" Rondelledeblocage5/16" 7O/L
38 Socketheadsetscrew5/16"'n.c.x5/16'' Vispressiontêteplate6PC5/16n.c.x5/16" 2O/L
39 Pop-rivet3/16"noAD-66BS Rivetpop3/16no.AD-66BS 4O/L
40 Greasefitting1/4"n.f. Graisseur1/4"n.f. 1O/L
41 Decaldangerbelts Decalquedangercourroies 1 105128
42 Decaldangermower Décalquedangertondeuse 1 106860
43 Dangerdecalchute Décalquedangergoulotte 1 105127
O/L=ObtainLocally

16
PARTSBREAKDOWN
GRASSCOLLECTOR

17
PARTSLIST
GRASSCOLLECTOR
Ref.
Réf.
Englishdescription Descriptionfrançaise
Qty.
Qté.
Part#
Pièce#
1Frame Châssis 1 106889
2Coverframe Châssisducouvercle 1 106890
3Coverwithsafetydecal Couvercleavecdécalquedesécurité 1 106910
4Retainingstrip Bandederétention 1 106888
5Rubberseal Joind'étanchéitéencaoutchouc 1 106882
6Support Support 2 106891
7Deflector Déflecteur 1 106887
8Parkingstand Pieddestationnement 2 106883
9Sleeve Douille 1 106892
10 Filter Filtre 1 106884
11 Bag Sac 3 106885
12 Gasspring Cylindreàgaz 2 106856
13 Quick-releasefastener Attacherapide 1 106896
14 Pin Goupille 2 106875
15 Pinwithhairpin4mm Goupilleavecgoupilleàressort4mm 1 106736
16 Adjustablepin Goupilleajustable 2 106934
17 Hairpin3mm Goupilleàressort3mm 2 102617
18 Lynchpin Goupilleàanneau 2 106894
19 Bushing Coussinet 4 102225
20 Spacer Espaceur 4 103361
21 Flexibletube Tubeflexible 1 106909
22 Hex.bolt1/4"n.c.x1/2"GR5 Boulonhex.1/4"n.c.x1/2"GR5 5O/L
23 Hex.bolt1/4"n.c.x3/4"GR5 Boulonhex.1/4"n.c.x3/4"GR5 15 O/L
24 Hex.bolt1/4"n.c.x1"GR5 Boulonhex.1/4"n.c.x1"GR5 4O/L
25 Hex.bolt7/16"n.c.x21/4"GR5 Boulonhex.7/16"n.c.x21/4"GR5 2O/L
26 Hex.bolt1/2"n.c.x11/4"GR5 Boulonhex.1/2"n.c.x11/4"GR5 4O/L
27 Flangenut1/4"n.c. Écrouàbride1/4"n.c. 24 O/L
28 NylonInsertlockNut7/16"n.c. Écrouàgarnituredenylon7/16"n.c. 2O/L
29 NylonInsertlockNut1/2"n.c. Écrouàgarnituredenylon1/2"n.c. 4O/L
30 Flatwasher#10hole Rondelleplate#10trou 13 O/L
O/L=ObtainLocally
Table of contents
Other Mahindra Farm Equipment manuals