Makita RP1110C Manual

Continuous Rating (W)
Voltage (V) Cycle (Hz) Input Output Max. Output(W)
100
110
220
230
240
Models No.
Description
PRODUCT
Current (A)
TECHNICAL INFORMATION
CONCEPTION AND MAIN APPLICATIONS
Specification
Standard equipment
Optional accessories
< Note > The standard equipment for the tool shown may be differ from country to country.
P 1 / 6
W1
H
L
W2
Dimensions for PR1110C
and PR910 : mm ( " )
Width ( W1 )
Width ( W2 )
Height ( H )
Length ( L )
269 (10-5/8)
260 (10-1/4)
150 (5-7/8)
110 (4-5/16)
12
10
5.3
5.0
4.8
4.0 (13.1) 4.0 (13.1)
9.5
8.6
4.3
4.1
3.9
RP1110C and RP0910
RP0910
RP1110C RP0910
RP1110C RP0910 RP1110C RP0910 RP1110C
50 / 60
50 / 60
50 / 60
50 / 60
50 / 60
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
1,100
710
710
710
710
710
1,500
1,500
1,500
1,500
1,500
900
900
900
900
900
620
620
620
620
620
Model No. RP1110C RP0910
No load speed: (min -1= rpm)
Plunge capacity : mm ( " )
Collet capacity : mm ( " )
Protection from electric shock
Cord length : m (ft.)
Net weight
8,000 - 24,000
0 - 57 (2-1/4) 0 - 57 (2-1/4)
8 (5/16) or 6.35 (1/4) 8 (5/16) or 6.35 (1/4)
Double insulation Double insulation
3.4 (7.5) 3.3 (7.3)
27,000
8mm Router (Plunge type)
Straight guide............. 1 pc.
Wrench 8 ................... 1 pc.
Wrench 17 ................. 1 pc.
Templet guide 12 ....... 1 pc.
Dust nozzle assembly...1 pc.
Nozzle assembly......... 1 pc.
Various router bits,
Collet cone 6,
Collet cone 8,
Collet cone 6.35mm
Hose 28
Model RP1110C and RP0910 are Makita's first 1000W class
professional 8mm plunge routers. Compared with Elu #OF97E,
they are more compact and easier to handle.
Model RP1110C (1100W) with electronic controller and
Model RP0910 (900W) without electronic controller.

Repair P 2 / 6
< 1 > Repairing armature
(1) Remove router bit, collet nut and stopper pole.
(2) Remove knob (without switch trigger, lock off/on button) by turning it anti-clockwise.
Compression spring 8 is to be removed automatically together with the knob.
Also lock pin has to be taken off from the threaded hole for knob. See Fig.1.
(3) Separate motor section from base section after taking off wing nut M10 and nylon nut M10.
50
40
30
20
10
0
Base section
Motor section
Knob R
Wing nut M10
Nylon nut M10
Compression spring 8
Lock pin
Knob
(5) Remove knob cover R by taking off 2 pcs. of tapping screw 4x18.
Pay attention, not to lose compression spring which may spring out from the knob,
when removing the knob cover.
(4) Take off brush holder cap and carbon brush.
Wing nut M10
Nylon nut M10
Motor section
Base section
Brush holder cap
Collet nut
Compression spring 8
Compression spring 7 Lock off button
Trigger
Knob cover R
Tapping screw 4x18
Knob
Switch Pan head
screw M6x20
(6) Take off lock off button, trigger and switch from the knob R.
(7) Remove knob R from motor section by taking off pan head screw M6x20
as illustrated in Fig.3.
Fig.1
Fig.2
Fig.3
50
40
30
20
10
0
Brush holder cap
Carbon brush 50
40
30
20
10
0

Repair P 3 / 6
(8) Remove retainer cover by taking off 2 pcs.of pan head screw M4x18 as illustrated in Fig.4.
(9) Separate motor bracket section from motor section by taking off 4 pcs. of tapping screw 5x35
as illustrated in Fig.4.
(10)Set armature in No.1R039 armature holder, and hold the armature holder with vise
as illustrated in Fig.5. Remove retainer with spanner 32 or monkey wrench from armature shaft
by turning anti-clockwise.
50
40
30
20
10
0
Pan head
screw M4x18
Tapping screw 5x35
Motor bracket section
Motor section
Retainer cover
Retainer
Armature
(11)Hold motor bracket steadily. Remove the armature by pressing its shaft with arbor press.
Fig.4
1R039 Armature holder for vise : A= 41.5mm
A1R039 Armature holder
for vise
Retainer
Vise
Something to hold bracket
Motor bracket
Press with arbor press.
Fig.5
Fig.6

Circuit diagram P 4 / 6
23
Controller
Noise
suppressor
Noise
suppressor
Switch
White
White
White
White
Blue
Black
Black
Black
Black
Black
Terminal
block
Terminal
block
Power supply
cord
Power supply
cord
< Note > Noise suppressor is not used in some countries.
< Note > Noise suppressor is not used in some countries.
Black
Black
23
Switch
Black
Black
Black
White
White
White
Grounding terminal
of field
Transparent
sheath
Model RP1110C
Model RP0910

Wiring diagram P 5 / 6
Sponge
Sponge for dust protector
installed in knob R
Wiring in knob R
Switch
Lock
off button
Trigger
Pass lead wires to be connected to
switch, as per the illustration.
A : View from top
B : View from
knob R side
A : View from top
B : View from knob R side
Model RP1110C Boss
Rib
Boss
Controller
Pass lead wire of support (field)and
the same of controller, in the groove.
Pass lead wire of
controller between
boss and rib.
Pass lead wire of controller
between boss and rib.
Noise suppressor
Terminal block
Cover noise suppressor with sponge
and set its lead wires in side of the
machine (armature side).
Fix lead wires to be connected to
terminal block, with lead holder.
And set the lead wires of noise suppressor
inside of the machine (armature side), when
fixing them with lead holder.
Put insulated terminal
and slacked lead wires
in this place as per
the illustration.

Wiring diagram P 6 / 6
Sponge
Sponge for dust protector
installed in knob R
Wiring in knob R
Lock
off button
Trigger
Pass lead wires to be connected to
switch, as per the illustration.
A : View from top
B : View from
knob R side
B : View from knob R side
Model RP0910 A : View from top
Lead wire of noise suppressor
with transparent sheath
Pass lead wire of noise suppressor
with transparent sheath, between
boss and rib.
Rib
Boss
Pass lead wire of support (field)and
the same of noise suppressor with
transparent sheath, in the groove.
Put insulated terminal
and slacked lead wires
in this place as per
the illustration.
Boss
Noise
suppressor
Set noise suppressor as per
the illustrated position.
When noise suppressor without
grounding wire (covered with
transparent sheath) is used,
cover the noise suppressor
with sponge.
Fix lead wires to be connected to
terminal block, with lead holder.
And set the lead wires of noise suppressor
inside of the machine (armature side), when
fixing them with lead holder.