Makita ML123 Manual

Continuous Rating (W)
Voltage (V) Cycle (Hz) Input Output Max. Output(W)
110
ML123
115
120
220
230
240
Models No.
Description
NEW TOOL
Current (A)
TECHNICAL INFORMATION
CONCEPTION AND MAIN APPLICATIONS
Specification
Standard equipment
Optional accessories
< Note > The standard equipment for the tool shown may differ from country to country.
P 1 / 5
Rechargeable Job Site Light
This product has been developed as a sister model of ML122.
It is different from ML122 in the following points.
* Retractable hook instead of strap with hook
* Built in type reflector instead of removable one
The continuous illumination time is 230 minutes (almost 4 hours),
if the full charged Ni-MH battery of 3.0Ah is attached
to this product.
L-1
L-2
W
H
Dimensions : mm ( " )
Width ( W )
Height ( H )
Length ( L-1 )
Length ( L-2 ) 411 (16-1/4)
350 (13-3/4)
94 (3-11/16)
97 (13-13/16)
Battery voltage ( V )
Battery capacity (Ah)
*Continuous illumination time: approx.min.
**Illumination (lx)
Net weight w/o battery :Kg (lbs )
12 9.6
2.03.0
150230 150230
2.03.0
330 280
0.37 (0.82)
< Note > * Continuous illumination time: The figures shown in the above list can differ from condition to condition
of batteries or room temperature.
**Illumination (lx) : The figures shown in the above list were measured on the following conditions.
* With attaching reflector to the product
* Measured at the point of 50 cm distant from light source
* Set plate ........................... 1 pc.
* Hook ................................ 1 pc.
* Chargers ; DC1411, DC1801, DC9710, DC9711, DC1470, DC1201
DC1422, DC9700, DC1290
* Ni-Cd / 12V Batteries ; 1222, 1202, 1202A, 1200, 1200A, 1220
* Ni-Cd / 9.6V Batteries ; 9122, 9102, 9102A, 9100, 9120
* Ni-MH / 12V Batteries ; 1233, 1234, 1235, 1235A, 1200A, 1220
* Ni-MH / 9.6V Batteries ; 9133, 9134, 9135, 9135A,
< Note > The battery's size is not included
in the above dimensions.

Comparison of products
Features and benefits P 2 / 5
Absorber to protect
body from shock
Clear lamp head cover.
A beam through this cover
floodlights narrow space.
Reflector placed
inside lamp cover
does not disturb
your work.
Two supporting blocks
for stationary application
Retractable hook for
easy storage.
Fits the outline of lamp
cover perfectly.
Also removable.
Accepts both 12V and 9.6V batteries.
With set plate (comes with this
product), all Makita cluster type
9.6V and 12V batteries are available.
* Continuous illumination time: The figures shown in the above list can differ from condition to condition
of batteries or room temperature.
< Note >
** Illumination (lx) : The figures shown in the above list were measured at the point of
50 cm (19-3/4") distant from light source
Model No.
Specifications
Voltage ( V )
*Continuous illumination
time: approx.min.
**Illumination (lx)
Fluorescent
tube
Type of tube
*** Service life : h
Starter
Dimensions : mm ( " )
w/o battery Length w/o hook
Length w. hook
Width
Height
Net weight w/o battery :Kg (lbs )
Weight w/ battery 1222 :Kg (lbs )
Weight w/ battery 9122 :Kg (lbs )
12V/ 2.0Ah
9.6V/ 2.0Ah
12V
9.6V
ML123
MAKITA
ML701
9.6 / 12
150 120
(with battery 7.2V 1.3Ah)
150
330
280
Compact fluorescent tube 13W x 2
2,600 1,000
No No
350 (13-3/4)
411 (16-1/4)
94 (3-11/16)
97 (3-13/16)
210 (8-1/4)
91 (3-5/8)
44 (1-3/4)
0.37 (0.82) 0.23 (0.51)
0.57 (1.26) w/ battery 7000
7.2
Fluorescent tube 4W x 1
1.02 (2.25)
0.92 (2.03)
100
(with battery 7.2V 1.3Ah)
Color temperature : K 4,100 4,200
*** Service life : The figures shown in the above list are based on the aggregate sum of illumination time
in repeating "ON" for 19 minutes and "OFF" for 1 minute

Repair P 3 / 5
< 1 > Replacing battery holder, switch and circuit complete
(1) Connecting lead wires
The lead wires have to be connected as illustrated in Fig. 1. And then, solder them.
Fig. 1 Fig. 1A
Correct connection Wrong connection
Battery holder
Fluorescent
tube holder
(A)
(A) Connecting circuit complete's lead wire with battery holder
(B) (C) Connecting circuit complete's lead wire with switch
(C)
(B)
Solder here.
Lead wire (black) covered with
yellow tube
Yellow tube
Lead wire (red) covered with
yellow tube
Switch
Lead wire (black) covered with
yellow tube
Lead wire (black) covered with
yellow tube
Yellow tube
Yellow tube
Circuit complete side
Circuit complete
Switch

Repair P 4 / 5
(D-1)Removing circuit complete's lead wire from fluorescent tube holder
Insert small screwdriver deep into rib 1 and 2 and pull out the lead wires pressing
with the screwdriver in the direction of the arrow as illustrated in Fig. 2A.
(D-2)Connecting circuit complete's lead wire with fluorescent tube holder
Insert receptacles into the holes of fluorescent tube holder with facing the receptacles' spikes to the outside
as illustrated in Fig. 3.
Lead wires (red) Tube installing side
View from tube installing side
Rib 1
Rib 2
Fluorescent tube holder
Fluorescent tube holder
Fig. 2A
Fig. 2
Lead wire (black) covered
with yellow tube
Lead wire (red) covered
with yellow tube
The receptacles' spikes have to be
faced to out side.
Circuit complete
Fluorescent tube holder
< Note > The spikes of pulled (used) receptacles are deformed as illustrated in Fig. 3A.
The used ones have to be corrected as illustrated in Fig. 3B.
Fig. 3A Fig. 3B
Deformed spike Corrected spike
Fig. 3
Small
screwdriver
Small
screwdriver

Circuit diagram
Wiring diagram
P 5 / 5
Terminal +
Terminal
Battery holder Circuit
complete Fluorescent tube
Switch
Battery holder
Fluorescent
tube holder Circuit complete
Place lead wire, so that it can not be pinched
by housing, circuit complete and fluorescent tube holder.
Place lead wire, so that it can not be pinched
by housing, circuit complete and battery holder.
A
B