Masport grandciew s3 Assembly instructions

wood fires.
A B E F G H R§
150 350 200 345 730 607 858
A B E F G H R§
§
Valid only when the room walls are at 90°to each other.
See " INSTALLING THE FLUE " for recommended Australian flue systems.
PRT. NO.
DATE: 27.05.2010
595775
These instructions must be used in conjunction with the 'General Installation Instructions' for Masport
GRANDVIEW S3
‡ Note: Clearances are for fire hazard only. For durability of finishes or surfaces you should contact the
relevant manufacturer for their specification. Masport accepts no responsibility for the deterioration of surfaces
or finishes.
MODEL
INSTALLATION SPECIFICATION SHEET
POSITIONING YOUR FREE-STANDING WOODFIRE
MODEL FLUE HEAT SHIELD
NEW ZEALAND
AUSTRALIA
MINIMUM DISTANCES TO HEAT SENSITIVE WALLS (mm)
MINIMUM DISTANCES TO HEAT SENSITIVE WALLS (mm)
MODEL FLUE HEAT SHIELD
This fire has been tested to the Australian/New Zealand Standard AS/NZS 2918:2001 and all installations must
be in accordance with the minimum clearances to combustibles indicated in these instructions.
CLEARANCE REQUIREMENTS
The minimum clearances to combustables may be reduced if the combustable walls are shielded with an
approved non-combustable material. Details of suitable materials and appropriate clearance reduction factors
are present in Section 3 of AS/NZS 2918:2001.
SINGLE POLISHED S/S 900mm
GRANDVIEW
S3
O:\W-F INSTALLATION SPECIFICATIONS\Individual Installation Data Sheets\INSTALLATION
SPECIFICATIONS INDIVIDUAL MASPORT\GRANDVIEW S3 Installation Data Sheets 595775-10-05-27.xls

PARALLEL INSTALLATION
MINIMUM FLOOR PROTECTOR DIMENSIONS IN mm
# DIMENSIONS IN THE TABLE ARE VALID ONLY WHEN THE FIRE IS EXACTLEY AT ITS MINIMUM
ALLOWABLE WALL CLEARANCE.
Flue
Shield
Floor
Protector
height A# C# D F I J K# P2 P3 W
SINGLE 150 300 103 345 665 965 1060 610 195 760
Flue
Shield
Floor
Protector
height A# C# D F I J K# P2 P3 W
FLOOR PROTECTOR (Hearth) REQUIREMENTS
NOTE: Where a fan is being fitted, you may prefer to increase the ‘A’ dimension to 100 mm to provide easier access for
servicing. If so, the amount you add to ‘A’ to bring it to 100 mm must also be added to the ‘C’ and ‘S’ dimensions.
# Valid only when the fire is exactly at its minimum allowable wall clearance.
Ø for minimum constructional requirements see general installation instructions.
MODEL
Floor Protector
Type Ø
AUSTRALIA - ALL WITH FLUE HEATSHIELD
NEW ZEALAND
MODEL
GRANDVIEW
S3
Floor Protector
Type Ø
AFP
O:\W-F INSTALLATION SPECIFICATIONS\Individual Installation Data Sheets\INSTALLATION
SPECIFICATIONS INDIVIDUAL MASPORT\GRANDVIEW S3 Installation Data Sheets 595775-10-05-27.xls

FLOOR PROTECTORS (Hearth) REQUIREMENTS
CORNER INSTALLATION
MINIMUM FLOOR PROTECTOR DIMENSIONS IN mm
# DIMENSIONS IN THE TABLE ARE VALID ONLY WHEN THE FIRE IS EXACTLEY AT ITS MINIMUM
ALLOWABLE WALL CLEARANCE.
SINGLE 300 200 607 1573 1247 715 858 ASH
AUSTRALIA
C E
NEW ZEALAND
MODEL Flue
Shield
Floor Protector Distance
above Floor R#
GRANDVIEW
S3
H# L# M# N
MODEL Flue
Shield
Floor Protector Distance
above Floor C E H# L# M#
FLOOR
PROTECTOR
TYPE
FLOOR
PROTECTOR
TYPE
N R#
O:\W-F INSTALLATION SPECIFICATIONS\Individual Installation Data Sheets\INSTALLATION SPECIFICATIONS
INDIVIDUAL MASPORT\GRANDVIEW S3 Installation Data Sheets 595775-10-05-27.xls

P1 P3 H W S1 S2 S3 S4
620 195 800 760 340 170 20 605
FREE STANDING FIRE DIMENSIONS
MODEL
GRANDVIEW S3
O:\W-F INSTALLATION SPECIFICATIONS\Individual Installation Data Sheets\INSTALLATION
SPECIFICATIONS INDIVIDUAL MASPORT\GRANDVIEW S3 Installation Data Sheets 595775-10-05-27.xls

THIS INSTALLATION GUIDE IS FOR NZ INSTALLATIONS
FOR AU INSTALLATION PLEASE REFER TO THE SPECIFIC FLUE INSTALLATION INSTRUCTIONS.