Masterflex I/P Series User manual

MASTERFLEX®I/P®SERIES
DIGITAL PERISTALTIC
PUMP DRIVES
Quick Start Guide

DANGER: Remove power from the pump before any cleaning operation is started.
WARNINGS: Remove power from the pump before attempting any maintenance.
A contactor or other device that routinely disconnects and reapplies the AC line to
the drive to start and stop the motor can cause drive hardware damage. The drive is
designed to use control input signals that will start and stop the motor.
WARNINGS: Tubing breakage may result in fluid being sprayed from pump. Use
appropriate measures to protect operator and equipment.
Turn Pump System off before removing or installing tubing. Fingers or loose clothing
could be caught in drive mechanism.
CAUTIONS: Replace the fuse only with one of the same type and rating. The fuse
rating and type are stated on the rear panel.
Power must be turned off before connecting the external remote control cable to
prevent damage to the drive.
CAUTIONS: To avoid electrical shock, the power cord protective grounding
conductor must be connected to ground. Not for operation in wet locations as defined
by EN61010-1.
If the product is not used in a manner specified in the instructions, the protection
provided by the equipment may be impaired.
CAUTION: Risk of Danger. Consult Operator’s manual for nature of hazard and
corrective actions.
CAUTION: Risk of crushing. Keep fingers away from rotor while pump is in operation.
Stop pump before loading or unloading tubing.
CAUTION: Hot Surface. Do not touch.
CAUTION: Risk of electric shock. Consult Operator’s manual for nature of hazard
and corrective actions.
This product is not designed for, nor intended for use in patient connected
applications; including, but not limited to, medical and dental use, and accordingly
has not been submitted for FDA approval.
This product is not designed for, nor intended for use in hazardous duty areas as
defined by ATEX or the NEC (National Electrical Code); including, but not limited to
use with flammable liquids. Consult the factory for products suitable for these types
of applications.
SAFETY
PRECAUTIONS
!
!
Explanation of
Symbols !
!
WARNING:
Product Use
Limitation
C
12
year
warranty
70 dba @ 1M
-25C, -13F +65C, +149F
+0C, +32F +40C, +104F
EN61010-1 L.V. DIR.
EN61326-1 EMC DIR.
EN60529 / IEC 60034-5
77420-10,
77420-20
40 lbs. (18 kg)
IP 77420-10
77420-20 IP66 (NEMA 4X)
77420-10, 77420-20 0.1-650 rpm

Product Accessories
07575-80 Remote control cable 31-pin (NEMA 4X), 25ft (7.62m)
07575-84 Footswitch (NEMA 4X)
23
Step1 Step2 Step3
Screw in Motor cable Plug in Power Cable Switch On Power
1
Replacement Cord/Plug Sets Ordering Information
Catalog
Number
Catalog
Number
Catalog
Number
Description Description Description
50001-60
50001-62
50001-64
50001-68
50001-69
50001-70
50001-72
50001-74
50001-76
50001-78
—
—
Australia
Denmark
India
U.S. STD. 115V
Israel
Europe
England
Switzerland
Italy
U.S. 230V
—
—

Graphic Interface
4
5
LANGUAGE
IDIOMA
LANGUE
SPRACHE
LINGUA
MAIN MENU
MEN PRINCI PAL
MENU PRINCIPAL
HAUPTMEN
MENU PRINCIPALE
メインメニュー
CONTINUOUS MODE
MODO CONTINUO
MODE CONTINU
DAUERMODUS
MOD CONTINUA
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
FLOW RATE
CAUDAL
DB IT
DURCHFLUSSRATE
INDICE DI FLUSSO
KEYPAD LOCKOUT
BLOQUEO DETECLADO
VERROUILLAGE CLAV
.
TASTENFELDSPERRE
BLOCCO DEITAST I
REMOTE CONTROL
CONTROL REMOTO
TLC OMMANDE
FERNBEDIENUNG
CONTROLLO REMOTO
TUBING SIZE
TAMA O DEL TUBO
TAILLE DU TUYAU
ROHRLEITUNGSGR.
DIMENSIONE TUBI

PUMP DIRECTION
DIRECCI N BOMBA
DIRECTION POMPE
PUMPRICHTUNG
DIREZIONE POMPA
FLOW UNITS
UNIDADES DE FLUJO
UNITS DE DB IT
DURCHFLUSSEINHEIT
UNIT DI FLUSSO
ENTER
ENTRE
ENTRER
EINGABE
INSERIRE
START/STOP
INICIO/DETENCI N
DM ARRER/ARR˚TER
START/STOPP
AVVIO/ARRESTO
/
/
PRIME
CEBAR
AMOR˙ER
ANSAUGEN
ADESCARE
ANTI-DRIP
SIN GOTEO
ANTI-GOUTTES
KEIN TROEN
ANTISGOCCIOLO
Keypad Legend
6
7
CONTINUOUS MODE
MODO CONTINUO
MODE CONTINU
DAUERMODUS
MOD CONTINUA
CONTINUOUS MODE
MODO CONTINUO
MODE CONTINU
DAUERMODUS
MOD CONTINUA

COPY DISP
.
MODE
DUPLICAR DISP
.
DISTR. REPETEE
WH.F RD .MOD
.
MOD DIST COPIA
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
VOL DISP
.
MODE
VOLUMEN DISP
.
DISTR. VOLUME
MENG.F RD .MOD
.
MOD DIST VOLUME
TIME DISP
.
MODE
TEMPORIZAR DISP
.
DISTR. PROGRAM
.
ZEITFR D.MOD.
MOD DIST TEMPO
FLOW UNITS
UNIDADES DE FLUJO
UNITS DE DB IT
DURCHFLUSSEINHEIT
UNIT DI FLUSSO
87
COPY DISP
.
MODE
DUPLICAR DISP
.
DISTR. REPETEE
WH.F RD .MOD
.
MOD DIST COPIA
8
9
SETUP
MONTAJE
INSTALLATION
SETUP
IMPOSTAZIONE
セットアップ
VOL DISP
.
MODE
VOLUMEN DISP
.
DISTR. VOLUME
MENG.F RD .MOD
.
MOD DIST VOLUME
TIME DISP
.
MODE
TEMPORIZAR DISP
.
DISTR. PROGRAM
.
ZEITFR D.MOD.
MOD DIST TEMPO
TUBING SIZE
TAMA O DEL TUBO
TAILLE DU TUYAU
ROHRLEITUNGSGR.
DIMENSIONE TUBI

9
TUBING CAL
CAL DE TUBER˝A
TALON. TUYAU
ROHRLEITUNGSKAL
TARATURA TUBI
FLOW RATE
CAUDAL
DB IT
DURCHFLUSSRATE
INDICE DI FLUSSO
ANTI-DRIP
SIN GOTEO
ANTI-GOUTTES
KEIN TROEN
ANTISGOCCIOLO
25
1
9
1
48
3
1
2
7
1
3
1
8
24
29
3
1
30
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
20
22
16-19, 21
23, 26-31
24
25
Speed Control Voltage Input (0-10V)
Speed Control Current Input (0-20 mA)
Speed Control Input Ground Return
Speed Signal Current Output (0-20 mA)
Speed Signal Output Ground Reference
(Motor Running N.O. Default) 1A @24V
Logic COM (Motor Running)
(Motor Running N.C. Default) 1A @24V
Speed Signal Voltage Output (0-10V)
Remote Start/Stop Input
Remote CW/CCW Input
Remote Start/Stop, CW/CCW, Prime Grnd Ref
Tach Ground Reference
Tach Output (open collector)
Remote Prime Input
General Alarm Output
LOcal/Remote Indicator
Reserved - Not Used
Reserved - Not Used
Aux 24V+
Aux 24V-
Pin No.
Circ.-31 Description
Pin No. Circ.-31

US & Canada only
Toll Free 1-800-MASTERFLEX | 1-800-637-3739
Outside US & Canada
1-847-381-7050
*EN809 manufactured by:
Masterflex LLC
28W092 Commercial Avenue, Barrington, IL 60010
[email protected] | www.masterflex.com
A-1299-1091B Edition 04
I/P Series Digital
Peristaltic Pump Drive
With Easy-Load®Pump
Head 77420-20
I
/P Series Di
g
ita
l
P
er
i
sta
l
t
i
c
P
um
p
D
r
i
v
e
Wi
t
h
E
as
y
-
L
oa
d
®
P
um
p
Head
77420-20
I/P Series Digital
Peristaltic Pump Drive
With Easy-Load®Pump
Head 77420-10
I/P Digital Peristaltic Pump Drives and Systems
Drive Only - White Powder Coated (No Pump Head)
CATALOG NUMBER
77420-10
77964-20
77420-20
77964-30
Bench Top
Drive Only - Stainless Steel (No Pump Head)
Pump System with Easy-Load I/P Pump
Pump System with Easy-Load I/P Pump