Matrix G3PL79 SQUAT User manual

MATRIX FITNESS SYSTEMS |1600 LANDMARK DRIVE COTTAGE GROVE WI 53527 USA
Toll Free 866.693.4863 matrixfitness.com Fax [phone]
PART # 0000000000
REV. 1.5
ACTION FREQUENCY
Clean Upholstery Daily
Inspect Hardware Monthly
Inspect Frame Bi-Annually
Clean Machine As Needed
Clean Grips As Needed
Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water.
MAINTENANCE CHECKLIST
PRODUCT SPECIFICATIONS
TECH SPECS
Overall dimensions 58”L X 65”W x 33”H (1478 cm x 1650 cm x 838 cm)
Weight 225 lbs (102 kg)
Shipping weight 271 lbs (123 kg)
WARRANTY (Valid in USA only)
Frame (not coatings) 10 years
Structural parts 10 years
Pivot bearings 5 years
Any items not specified 3 years
Labor (excluding upholstery/cables/grips) 3 years
Upholstery/cables/grips/springs 1 year
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals,
whether they are the end user or supervising personnel on proper usage of the equipment.
It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following
information prior to its use.
PROPER USAGE
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that
MATRIX Fitness Systems equipment be used properly to avoid injury.
Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts
supplied by your country’s local MATRIX Fitness Systems dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important
information. If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or
tipping over. This must be performed by a licensed contractor.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment, as well
as keeping users liability to a minimum. Equipment needs to be inspected at regular intervals. Defective
components must be replaced immediatly. Improperly working equipment must be kept out of use until it is
repaired. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is
qualified to do so. Matrix Fitness will provide service and maintenance training at our corporate facility upon
request or in the field if proper arrangements are made.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified
to do so. MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate
facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID
INJURY!
1. Never allow children on freeweight equipment. Teenagers must be supervised at all times while using
this equipment.
2. All warnings and instructions should be read and proper instruction obtained prior to use.
3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program.
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts.
5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable.
6. This equipment should only be used in supervised areas where access and control are regulated by the owner.
IMAGE SHOWN MAY NOT REPRESENT FINAL PRODUCT
AURA PLATE LOADED
G3PL79 SQUAT / LUNGE
G3PL79_AURA_squat_lunge_r1.5.indd 1 5/3/13 2:46 PM

AURA (G3-PL79) SQUAT / LUNGE
UNPACKING AURA (G3-PL79) SQUAT / LUNGE
Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and EN957-2 complaint Class S product. Your
MATRIX AURA (G3-PL79) SQUAT / LUNGE is inspected before it is packaged. It is shipped in multiple pieces to facilitate the
compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams.
Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
CAUTION
The weight of the AURA (G3-PL79) SQUAT / LUNGE is 225 lbs. (102 kg). To avoid injury to yourself and prevent damage to the
frame components, be sure to have proper assistance removing the frame pieces from this box. Please be sure to install the
equipment on a stable base, properly level the machine and leave at least two feet of clearance to enter and exit the machine.
Maximum user weight for this machine is 300 lbs. (136 kg).
INCLUDED TOOLS REQUIRED FOR ASSEMBLY
6MM L-Shaped Allen Wrench
8MM L-Shaped Allen Wrench
21MM Open-End Wrench
If any items are missing please contact your country’s local MATRIX dealer for assistance.
0mm 10 20 30 40 50 60 70 80 90 100 1
10 120 130 140 150 160
Step 1
4
4
4
4
Item Description Qty
Z01
Z05
Z04
Flat Washer (M10)
Z06 Arc-Flat Washer
Screw (M10X25L)
Z02 4
Screw (M10X30L)
Lock Washer
Z01
Z01
Z05
Z02
Z05
Z02
Z04
Z06
Z04
Z06
Z02
Z05
Z02
Z05
Z01
Z01
Z06
Z04
Z04
Z06
Step 3
Item Description Qty
2
2
6
Z01
Z05
Z03
Flat Washer (M10)
Lock Washer
Screw (M10X25L)
Z02
Screw (M10X70L)
6
Z09 Screw (M10X75L) 2
Z01
Z05 Z02
Z02
Z05
Z09
Z03
Z05 Z02
Z02
Z05 Z01
Z09
Z05
Z02
Z02
Z05
Z03
Step 4
D13
D12
D14
D13
D12
D14
Z08
Z08
Z01 Z05
Z02
Z01
Z05
Z02
4Screw (M8X25L)Z08
Spacer Axle RingD14
Fixing Ring
Swivel Arm Axis
D13
D12
QtyDescriptionItem
2
2
2
Z02
Z01 Screw (M10X25L) 2
Flat Washer (M10) 2
Z05 Lock Washer 2
Step 2
6
Screw (M10X70L)
Z02
Screw (M10X25L)
Lock Washer
Flat Washer (M10)
Z03
Z05
Z01
QtyDescriptionItem
6
4
2
Z05
Z02
Z01
Z01
Z05
Z02
Z02
Z05
Z03
Z03
Z05
Z02
Z02 Z05 Z03
Z05 Z03
G3PL79_AURA_squat_lunge_r1.5.indd 2 5/3/13 2:46 PM