Mattel Tyco RC Disney Pixar Toy Story N9119 User manual

Keep these instructions for future reference as they contain
important information. IMPORTANT: Please read all
“Consumer Information” before operating your vehicle.
CAUTION: Surfaces may become hot and cause
burns if electronics get wet. Do not operate vehicle
through water or snow.
CAUTION: To prevent entanglement, keep all hair
away from the wheels.
I. CONTENTS/ FEATURES
Vehicle
Transmitter
Asst. N9119
N9120/N9121/N9122-0920
3+
l
o
IO
RC PIZZA PLANET ROCKET
BUZZ SPACE SHIP
l
o
IO
l
o
IO

II. BATTERY INSTALLATION
(Transmitter & Vehicle)
Requires 2 AA alkaline batteries for the vehicle and 2 AA
alkaline batteries for the transmitter. Batteries not included.
1. Use a screwdriver (not included) to unscrew and
remove the battery cover.
2. Your vehicle requires 2 AA alkaline batteries. Install with
polarity (+/-) as shown inside the battery compartment.
3. Transmitter requires 2 AA alkaline batteries. Install with
polarity (+/-) as shown inside the battery compartment.
4. Close the battery doors.
III. OPERATION
Your vehicle is designed for one-button easy control.
When your vehicle is switched on, it will be in auto-reverse
mode: running backward and to the left. When you press
the button, your vehicle will go straight ahead. To turn,
release the button and press it again to go forward when
your vehicle is facing the direction you want.
l
o
IO
2 XAA
N9120
N9121
N9122
l
o
IO
l
o
IO
l
o
IO
2 XAA
N9120
N9121
N9122
l
o
IO
l
o
IO
l
o
IO
Figure is not included.

IV. QUICK TIPS
1When your vehicle starts to lose power, it may lose
functionality or performance. It’s time for fresh
batteries. Your vehicle’s running time may change
depending on your driving style.
2Radio interference can affect your vehicle's
performance. Interference can be caused by other
R/C vehicles running on the same frequency,
electrical wires, large buildings or CB radios. Try to
stay away from these!
3Point your transmitter up - not down toward your
vehicle. If your vehicle gets too far away, it won’t
work properly.
4Don't drive your vehicle in sand or through water
or snow. If your vehicle does get wet, wipe it with a
towel and allow to dry completely overnight.
5Don’t store your vehicle near heat or in direct
sunlight. Always turn switches OFF and remove all
batteries for storage.
V. BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids that
can cause a chemical burn injury or ruin your product.
To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the
product before being charged (if designed to be
removable).
• Rechargeable batteries are only to be charged under
adult supervision (if designed to be removable).
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the
product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries
inside may explode or leak.
Battery Performance Note:
For best performance use regular or high-performance
alkaline batteries (where disposable batteries are called
for). If your vehicle is supplied with standard (carbon-
zinc) batteries for initial use and/or demonstration
purposes, we recommend replacing them with alkaline
batteries when necessary. Battery life may vary
depending on battery brand.
VI. CONSUMER INFORMATION
Note to Adults: To ensure that the child’s play is both
safe and fun, please review all operating instructions
and safety rules with your child.
Safety Tips
• NEVER drive your vehicle on streets!
They’re for real cars!
• DO NOT pick up the vehicle while in motion.
• Keep fingers, hair and loose clothing away from
the tires and the wheel hubs while the vehicle is
switched ON.
• Adult supervision is recommended when this vehicle
is being operated.
• To avoid accidental operation, remove all batteries
when not in use.
Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities.
N9120
N9121
N9122
l
o
IO
l
o
IO
l
o
IO

© Disney/Pixar Mattel, Inc. 636 Girard Avenue, East Aurora, NY
14052, U.S.A. Consumer Relations 1-888-557-8926. Retain this
address for future reference: • Mattel U.K. Ltd., Vanwall Business Park,
Maidenhead SL6 4UB. Helpline 01628 500303. • Mattel Australia Pty
Ltd., Richmond, Victoria 3121 - Consumer Advisory Service: 1300
135 312. • Mattel East Asia Ltd, Room 1106, South Tower, World
Finance Centre, Harbour City, Tsimshatsui, HK, China. • Diimport &
Diedarkan Oleh: Mattel SEA Ptd Ltd. (993532-P) Lot 13.5, Menara
Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel:
03-78803817, Fax: [phone]. service.mattel.com
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
• This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s authority to
operate the equipment.