
Operation
OperationOperation
Operation
1. Place batteries (included) in the battery compartment on the bottom of the scale ensuring
proper polarity, or plug in a suitable AC adaptor (not included).
2. Place the scale on a flat, stable surface.
3. Press the ARE/ON
ARE/ONARE/ON
ARE/ON key to power on. When
0
0 0
0
appears the scale is ready for weighing.
4. Press the UNI S
UNI SUNI S
UNI S
key to change the unit of measure from g
gg
g to kg
kgkg
kg to lb/oz
lb/ozlb/oz
lb/oz.
5. Set tare if desired.
6. Begin weighing.
7. urn the scale off by pressing the OFF
OFFOFF
OFF key. o save battery power, the scale will
automatically turn off after 90 seconds with no key activity or weight change.
Setting the are Weight
Setting the are WeightSetting the are Weight
Setting the are Weight
1. Place an empty container on the platform and press the ARE/ON
ARE/ONARE/ON
ARE/ON key.
he display will return
to zero, eliminating the weight of the container.
2. Put the material or object to be weighed in the container. he net weight will be displayed.
3. o exit tare mode, remove all weight from the scale. he display will show a negative weight.
Press the ARE/ON
ARE/ONARE/ON
ARE/ON key to return the display to zero, eliminating the weight of the container.
One Year Limited Warranty
One Year Limited WarrantyOne Year Limited Warranty
One Year Limited Warranty
Measure ek products covered in this manual are guaranteed to be free from
defects in material
and workmanship for a period of one year after date of purchase. Misuse, accidental damage,
overload, alteration, and improper installation are expressly excluded. Any product which is
determined to be defective in material or workmanship within this time period may, as the
exclusive remedy, be returned to an authorized Measure ek distributor or service center, freight
prepaid with prior return authorization, to be repaired or replaced at the manufacturer’s option.
Measure ek’s liability under this warranty is limited to the repair or replacement of the defective
product and in no event shall Measure ek be liable for consequential or indirect damages.