Medel SONNET 2 User manual

SONNET2
Quick Guide
AW37283_1.0 (English)
CI and EAS Audio Processor

Table of Contents
Rechargeable Batteries .................2
Disposable Batteries ...................6
DL-Coil .............................8
Earhook ...........................10
Microphone Cover.....................11
WaterWear ......................... 12
BabyWear ..........................13
ActiveWear .........................16
FineTuner Echo ......................20
AudioKey ..........................22
AudioLink ..........................23
Wireless Microphone System............24
Flight Mode ........................25
Battery Overview ....................26
Processor Indicator Light ..............27
DL-Coil Indicator Light.................30
Care and Maintenance ................32
Troubleshooting .....................34
The SONNET 2 Quick Guide contains easy-to-use instructions to get you started
with your SONNET 2. For detailed information on the intended use, indications,
contraindications, warnings and precautions of the SONNET 2 audio processor,
please refer to the instructions for use.

SONNET 2 CI and EAS Audio Processor
DL-Coil
Processor Indicator Light
DL-Coil Cable
Earhook
Pin
Air Inlets
DL-Coil
Indicator Light
EAS
Earhook Battery Pack
Microphone Cover
Control Unit
CI
Earhook
Battery Pack
Cover Lock
Microphones
1

SONNET 2
Assembling SONNET 2
With Rechargeable Batteries
Click!
To remove, press
the tip of the
release lever.
Attach the rechargeable battery
adapter to the control unit.
1Note the mechanism that secures
the rechargeable battery adapter
to the control unit.
2

Click!
Insert the rechargeable
battery at an angle. The side
with the higher lip should be
facing towards the earhook.
2Gently press the rechargeable
battery back into the adapter
until it clicks into place.
3
3

Battery Pack
Cover Lock
Locked
Unlocked
Plug the coil cable
into the control unit.
4
Make sure that the battery
pack cover lock is in the
unlocked position. Slide
the battery pack cover over
the rechargeable battery
adapter. Your SONNET 2 is
now switched on.
5
Be careful not to use too much
force when turning the lock.
Note the correct
orientation of the
coil cable socket.
4

To see which batteries you can
use with your SONNET 2, see the
Battery Overview on page 25.
To remove the rechargeable battery, simply
reverse steps 3 and 2. The rechargeable
battery adapter does not need to be removed
when changing the rechargeable battery.
Detaching
5

SONNET 2
Assembling SONNET 2
With Disposable Batteries
To remove, press
the tip of the
release lever.
Click!
Note the mechanism that secures
the control unit to the frame.
Attach the battery pack frame
to the control unit.
1
6

Note the correct
orientation of the
coil cable socket.
Plug the coil cable into
the control unit.
2
Insert the batteries with the
positive (+) poles facing out.
Make sure the battery pack
cover lock is in the unlocked
position. Slide the battery
pack cover over the battery
pack frame. Your SONNET 2 is
now switched on.
3
Battery Pack
Cover Lock
Locked
Unlocked
7

SONNET 2
Changing the Coil Cover
DL-Coil Cover
DL-Coil Cable
DL-Coil Magnet
DL-Coil
Indicator
Light
DL-Coil Base
8

Note the orientation of the plug.
The logo and arrow should face up.
Insert your ngernail or the plastic
screwdriver into the front of the
DL-Coil cover, and slide around the
base to gently detach it.
1Insert the coil cable into
the base.
2
Place the new cover over
the base, and gently press
together until they snap
into place.
3
9

SONNET 2
Changing the Earhook
Pin
Pin
Removal
Tool
Click!
Remove the earhook pin by pushing it
out with the supplied pin removal tool.
1Attach new earhook, and lock
into place with the earhook pin.
3
Remove the earhook by gently
pushing it down.
2If you have a SONNET 2 EAS, a
hearing professional will t your
earhook with an earmould.
10

SONNET 2
Changing the Microphone Cover
Insert the screwdriver into
the groove at the bottom
of the microphone cover.
1Place the new cover over
the control unit.
3
Starting at the earhook
end, press down until the
cover snaps into place.
4
Gently lever the
cover away from
the control unit.
2
The cover should be changed every three
months to maintain best possible hearing
with SONNET 2.
11

SONNET 2
Attaching WaterWear
Make your SONNET 2 waterproof with WaterWear,
and enjoy the water activities you love.
For more details, and instructions for how to attach WaterWear,
check out our online support at www.medel.com/WaterWear
– WaterWear makes your processor
completely waterproof.
– Can be used in fresh-, salt-, and
chlorinated water.
– The WaterWear covers are reusable.
12

SONNET 2
Attaching BabyWear
28cm DL-Coil Cable
Earhook Cover
Attachment Clip
13

Slide the silicone ring of
the attachment clip over
the battery pack cover
with the small cable ring
to the back.
1Slide the end of the 28cm
coil cable through the ring
in the attachment clip.
2Plug the coil cable
into SONNET 2.
3
All steps must be followed to
ensure BabyWear is tamperproof.
14

Slide the battery pack cover over
the battery pack. Lock into place
by turning the lock with the
plastic screwdriver.
4Replace the earhook with the
earhook cover (see page 10).
5
15

SONNET 2
Attaching ActiveWear
ActiveWear Battery
Pack Connector
Attachment Clip
ActiveWear Connector Cover
ActiveWear Connector
Cover Lock
16

Locked
Unlocked
Attach the ActiveWear
connector to the control unit.
1Slide the cover over the
connector and lock into place.
2
17

Locked
Unlocked
Attach any SONNET 2 battery
option to the ActiveWear battery
pack connector.
3Slide the regular battery pack
cover over the battery pack, and
lock into place.
4
18