Memphis Shades 2321-0159 User manual

Part No. 2321-0159
MS Batwing Cruiser Fairing Mounting Kit
Victory Kingpin
K1927 122109
WARNING
During installation, make sure that the fairing and hard-
ware do not interfere with any cables or wiring when
the forks are turned all the way in either direction. Also
make sure , through the full range of adjustment, that
the fairing and hardware do not hit the gas tank.
1.
2. If the adjustable clamps are installed backwards, it will
result in serious gas tank damage. Always check for
proper gas tank clearance before tightening hardware.
3. This is a detachable fairing, always make sure the lock-
ing mechanism is fully engaged after installing the
fairing.
The improper installation of this kit and related
components could result in serious injury or death.
4.
CAUTION
Memphis Shades fairings and Lowers are made from
Lucite® acrylic, and will last for years with proper care.
Clean your fairing with plenty of soapy water (mild dish-
washing liquid is best) and a soft cotton cloth. Use your
bare hands to feel and dislodge bugs, or cover with a
wet, soapy towel and let it soak. Don’t use paper towels
and scrape with anything. Small scratches can be re-
moved with NOVUS #2.
1.
Never use any glass cleaning products, petroleum
based chemicals, or cleaning agents with ammonia,
bleach or any other harsh chemicals. This includes (but
not limited to) RainX, brake fluid, acetone, paint thinner,
benzene and gasoline. “If it hurts your nose, it will hurt
the plastic.”
2.
Glass cleansing agents will cause severe damage to
your fairing, and will void your warranty.
3.
At certain times of the day the sunlight can reflect off
the curvature of a fairing and cause extreme heat build
up on motorcycle instruments and instrument panel.
Take care when parking. Park facing the sun, place an
opaque object over the instruments or adjust the fairing
to avoid reflections
4.
1. Kit Contents
Ref Part # Description Qty
(a) I1927 Mounting Instructions 1
(b) M1274 Clutch side Plate Assembly 1
(c) M1275 Throttle side Plate Assembly 1
(d) S1214 Large Detachable Clamp Assembly 4
(e) M310 3/16” Short Arm Allen Wrench 1
(f) M331 1/4-20 x 7/8 SS Socket Head Cap Screw 4
(g) R318 1” Socket Shoulder Washer 4
(h) R324 #207 O Ring, EPDM 4
(i) R323 Bushing Assembly (2 piece) 4
(j) R333 1” diameter spacer, 9/32” 4
(k) R329 5/8” Slot Nut 4
(n) M313 3/16” Allen Wrench Cover 1
Memphis Shades warrants all product components, metal
and plastic, against defects in materials and workmanship
for 24 months.
For Parts and Warranty Help, Contact:
Memphis Shades, Inc.
P.O. Box 429
Rossville, TN 38066
[phone]
Visit us on the web at www.memphisshades.com or you
can also reach us by email:
[e-mail]
a
b c
f
k
i h g
j Bushing Assembly,
Exploded view.
d
e/n
Detachable system allows easy removal.
Stylish and Functional.

Part No. 2321-0159
2. Mounting Instructions
Additional tools required, not included in this kit:
7/16” or 11mm wrench.
1.
2. Cover the gas tank and front fender with towels to
avoid damage during installation.
3. Install the two mounting plates onto the fairing, using
the acorn nuts and washers supplied with the fairing.
(See Fig 1)
4. Loosely install the fork clamps, approximately 1 3/4”
apart. (See Fig 2)
Start with each fork clamp bushing adjusted to the rear
of the slot. (See Fig 3)
5.
Slip the fairing mounting plates and fairing onto the fork
clamp bushing. (See Fig 4)
6.
Secure the Left and Right side Trigger Lock, locking
mechanism. (See Fig 5)
7.
Adjust the height, angle and alignment of the
fairing then tighten all bolts
8.
Fig 1
Fig 2
Loosen Allen Screw to
adjust Bushings to desired
fairing angle.
Rear of slot
Fig 3
Fig 4
Step 1 Step 2 Step 3 Step 4
Fig 5
NOT CORRECT CORRECT
Fully engaged Locking
Mechanism
The Fusion of Style & Function
11
MS Batwing Cruiser Fairing Mounting Kit
Victory Kingpin