Mercia Garden Products GROUNDSMAN 10 X 8 User manual

P 1










x2










  




10 X 8 Groundsman
ASSEMBLY INSTRUCTIONS
01PTGRO1008DD-V3








1234
5
Door Gable
AI-GRO1008DD-V2DG
Plain Gable
AI-01GRO1008DD-V2WG
Window Side QTY 2
AI-01GRO1008DD-V2WS
Plain Side QTY 2
AI-01GRO1008DD-V2PS
Floor QTY 2
AI-01GRO1008DD-V2F
67
Door
AI-01-21ZB675X1720-V1
8
Roof Panel QTY 2
AI-01GRO1008DD-V2RP
9
Opening Window QTY 2
AI-01OW-V1
Bunk Support - 2920mm
F4458-2920mm
Roof Block - 793mm QTY 2
F4458-793mm
Fascia - 1480mm QTY 4
S1295-1480mm
Window Trim - 1000mm QTY 2
S1240-1000mm
Cover Trim - 1640mm QTY 6
S1256-1640mm
Door Trim - 1443mm
S1245-1443mm
Door Trim - 1722mm QTY 2
S1245-1722mm
Fascia Block - 120mm QTY 4
F2744-120mm
Finial QTY 2
Butt Hinge
PI-07-0066
QTY 4
T-Hinge
PI-07-0021
QTY 6
Tower Bolt
PI-07-0030
Casement Stay
PI-07-0005
QTY 2
“L” Bracket
PI-07-0012
QTY 2
Bolt Block
120mm
50mm Screw x52
40mm Screw x30
Felt Tacks x180
20mm Screw x36
30mm Screw x116
16mm Screw x24
Nail Bag
Cloaking strip - 1670mm
F2744-1670mm
70mm Screw x10
P 2
01PTGRO1008DD-V3
Overall Dimensions:
Length = 3147mm
Width = 2627mm
Height = 2230mm
Base Dimensions:
Length = 2998mm
Width = 2387mm
Please retain product label and instructions for future reference
Before assembly
please make sure you have a
suitable base ready to erect your
building
MADE IN GREAT BRITAIN
10
11
12
13
14
15
16
17
18
19 20 21 22 23 24 25
Hasp & Staple
PI-07-0191
Pre drill
hole
30mm
screw
40mm
screw
Step 1
Remove transportation blocks
from the bottom of each panel
before assembling the building.
Pre-Assembly
Fix the door trim (No. 15 &16) onto the
front of the door gable using
4x40mm screws per strip.
The frames should sit 13mm
from the door aperture.
Attach the doors (No. 6) to the
building using the
T-hinges (No. 20) and 7x30mm
screws per hinge.
42x30mm Screws
12x40mm Screws
13mm
16
20
16
15
15
16

Step 2
Place the oor panels (No.
5) onto a rm & level base,
ensure the base has
suitable drainage free from
areas where standing
water can collect.
Secure the oors together
using 10x50mm screws
xing in an alternating
pattern.
10x50mm Screws
Pre drill
hole
50mm
screw
Step 3
Place the plain gable (No.
2) and the window sides
(No. 3) onto the oor and
secure using 6x50mm
screws.
DO NOT secure the
building to the oor until
the roof is xed in place.
6x50mm Screws
Pre drill
hole
50mm
screw
5
5
2
3
* Window panels can
be placed on either
side of the building.
Using the same method outlined
in Step 3, x the plain sides (No.
4) & the door gable (No. 1) using
12x50mm screws.
DO NOT secure the building to
the oor until the roof is
xed in place.
Step 4
12x50mm Screws
Pre drill
hole
50mm
screw
Step 5
Fix the roof panels (No. 7) to the
building. Ensure the framing
ts into the slot at the top
of the gables.
Secure in place using 12x30mm
screws per roof panel.
24x30mm Screws
Pre drill
hole
30mm
screw
7
7
3
4
4
1
P 3
Please retain product label and instructions for future reference

Step 6
Once the roof is xed,
secure the building to the
oor with 24x50mm screws.
* Ensure to screw in alignment
with the oor bearers.
24x50mm Screws
Pre drill
hole
50mm
screw
Felt
tacks
Pre drill
hole
40mm
screw
Pre drill
hole
30mm
screw
P 4
Please retain product label and instructions for future reference
Step 7
Cut the felt into 3 sheets and
lay onto the roof as shown in
the diagram ensuring there is
50mm overhang around the
sides. Place the middle one so
that it overlaps the outer sheets.
Fix using 180x felt tacks at
100mm intervals.
180x Felt Tacks
14
Step 8
Attach the cover trims (No. 14) to the
building using 3x40mm
screws per strip.
18x40mm Screws
* Felt measurement: 3250mm
HANDLE
WITH CARE
2
3
4
Step 9
Fix the fascia blocks (No. 17) to
roof using 2x30mm screws per
block. Ensure the blocks are ush
to the edge of the roof.
Attach the fascias (No. 12) and
nials (No. 18) to the front and
back of the building with
12x30mm screws.
20x30mm Screws
14
14
14
12
12
17
18

22
25
Step 11
Attach the bolt block (No. 25)
to the top of the slave door
with 2x30mm screws.
Align the tower bolts (No. 22)
onto the block and x using
6x30mm screws.
8x30mm Screws
Pre drill
hole
30mm
screw
13
9
Opening Window
Fixed Window
19
Pre drill
hole
16mm
screw
30mm
screw
P 5
Please retain product label and instructions for future reference
Step 10
To x the lock in place, screw the Staple
(No. 21) to the Door Gable or Slave door.
Making sure the Hasp (No. 21) is in line
with the staple and screw into the Door or
Master door.
To lock the Door, place the Hasp over the
Staple and twist into the lock position as
shown.
8x30mm screws.
Pre drill
hole
30mm
screw
Step 12- Follow EITHER the opening
window or xed window step.
Opening Window
Place the window trim (No. 13) 11mm
over the window (No. 8) and x in
place with 3x30mm screws per trim.
6x30mm Screws
If you would like the windows to be
opening use the butt hinges (No. 19)
to attach the window (No. 8) to the
strip. Fix the hinges to the strip using
30mm screws and 16mm to t the
hinges to the window frame.
12x16mm Screws
12x30mm Screws
Fixed Window
If you would like the windows (No. 8)
to be xed instead of opening, secure
the window to panel using 4x30mm
screws per window.
8x30mm Screws
30mm
Screws
16mm
screws

Pre drill
hole
20mm
screw
Pre drill
hole
30mm
screw 70mm
screw
It is ESSENTIAL that you apply wood
treatment immediately after the building
has been assembled.
AFTER TREATMENT:
score around protective
cover on glazing and
carefully peel
covering back
P 6
Please retain product label and instructions for future reference
23
Step 14
Line the bunk support (No. 10)
centrally between the roofs,
support with the roof block
(No. 11)at each gable end, xing
in place using 5x70mm screws per
block.
Secure the bunk support with the
“L” brackets (No. 24)at each end,
tting them into place using
4x30mm screws per“L” bracket.
8x30mm Screws
10x70mm Screws
24
11
10
Step 13
Fix the casement stay (No. 23) to the
window and then align the
xings to the window panel
framing. Ensure the casement
stay ts onto the xings when
closed before securing in
place.
12x20mm Screws

P 7

P 8
12

P9