Metra Electronics 88-00-2020 User manual

INSTALLATION INSTRUCTIONS FOR PART 88-00-2020
88-00-2020
INSTALLATION INSTRUCTIONS
APPLICATIONS
STORAGE POCKET
(TOBE USED WITH INST99-2020
BUICK Regal 1988-1994)
KIT FEATURES
•OEM Radio Replacement Pocket
A) Storage Pocket
KIT COMPONENTS
A
•Phillips Screwdriver • Small Flat Blade Screwdriver • Panel Removal Tool
1-800-221-0932
©COPYRIGHT 2001-2008 METRA ELECTRONICS CORPORATION
www.metraonline.com
TOOLS REQUIRED:

Dash Disassembly - All Vehicles .......................................1
Final Assembly .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
*Note:
Refer also to the instructions included with the aftermarket radio.
Chevrolet
-Blazer 1973-1987, Pickup 1973-1987 .................. . . . . . . .1
GMC
TABLE OF CONTENTS
88-00-2020
K NOWLEDGE IS P OWER
Enhanceyour installation and fabrication skills
by enrolling inthe most recognized and
respected mobile electronics school in our
industry.
Log onto www.installerinstitute.comor call
800-354-6782 for more informationandtake
steps towardabetter tomorrow.

ALL VEHICLES
DASH DISASSEMBLY
Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip
the entire dash trim bezel and remove. Remove 9/32" fasteners from the right side of
the factory radio module and (2) fasteners from the left side. Disconnect the wiring and
remove the module. Refer also to instructions included with Metra Kit INST99-2020.
See Fig. A. Continue to final assembly.
1
Factory Radio
Module
88-00-2020 DASH DISASSEMBLY
A

ALL VEHICLES
FINAL ASSEMBLY
2
88-00-2020 FINAL ASSEMBLY
Insert the Metra storage pocket in the radio cavity. (See Fig. A)
1
A
1-800-221-0932
REV. 12/17/08 © COPYRIGHT 2001-2008 METRA ELECTRONICS CORPORATION INST99-2020
www.metraonline.com