Metra Electronics 99-9107B User manual

INSTALLATION INSTRUCTIONS FOR PART 99-9107B
•(2) 86-9001 Head Unit Removal Tools • Small Flat Blade Screwdriver • Phillips Screwdriver
1-800-221-0932 www.metraonline.com
KIT FEATURES
©COPYRIGHT 2004-09 METRA ELECTRONICS CORPORATION
APPLICATIONS
Audi A4 / S4
2002-2008
•DIN Head Unit Provision with Pocket
•ISO DIN Head Unit Provision with Pocket
•Double DIN Head Unit Provision
•Painted Matte Blackto Match Factory
•A) Radio Housing • B) Pocket • C) Trim Plate • D) ISO Brackets • E) Double DIN Trim Plate
•F) Double DIN Brackets
KIT COMPONENTS
TOOLS REQUIRED:
99-9107B
(With Symphony Radio)
AD
EF
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-1787 - VW / Audi Harness 1993-up
Antenna Adapter:
• 40-VW10 - Euro Antenna Adapter 1986-up
BC

Dash Disassembly
-Audi A4 / S4 2002-2008 w/Symphony Radio . . . . . . . . . . . . . . 1
Kit Assembly
-DIN Head Unit Provision with Pocket . . . . . . . . . . . . . . . . . . . . . 2
-ISO DIN Head Unit Provision with Pocket . . . . . . . . . . . . . . . . . . 3
-Double DIN Head Unit Provision . . . . . . . . . . . . . . . . . . . . . . . . . 4
Final Assembly .....................................5
TABLE OF CONTENTS
99-9107B
K NOWLEDGE IS P OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP certified
technicians..

1
AUDI A4 / S4 2002-2008 W/SYMPHONY RADIO
AS
FM
AM
SAT
TAPE SCAN
RDS
TONE
MENU
LOAD
CD
A
99-9107B
1
2
Disconnect the wiring.
Insert Metra’s 86-9001 into the
slots in the factory head unit and
pull the unit out.
(Figure A)
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
3
DASH DISASSEMBLY

2
99-9107B KIT ASSEMBLY
Snap the pocket into the Radio
Housing until secure.
(Figure C)
5
Snap the DIN cage into the Radio
Housing and secure by bending
the metal locking tabs down.
(Figure A)
1
Slide the aftermarket radio into the
cage and secure.
(Figure B)
4
Snap radio assembly into factory
radio opening.
3
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
2
DIN HEAD UNIT PROVISION WITH POCKET
A
B
C
NOTE: Once the dash kit is snapped
in, it cannot be removed without
dash panel removal

3
99-9107B KIT ASSEMBLY
Slide the head unit into the radio
opening until the slide clips
engage. (Figure B)
2
Mount the ISO Brackets to the
head unit with the screws sup-
plied with the unit. (Figure A)
1
Snap the pocket into the Radio
Housing. (Figure C)
4
Snap the ISO Trim Plate into the
Radio Housing. (Figure B)
3
Snap the radio assembly into the
factory radio opening.
6
Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-con-
nect the negative battery terminal
and test the unit for proper opera-
tion.
5
ISO DIN HEAD UNIT PROVISION
A
B
C
NOTE: Once the dash kit is snapped
in, it cannot be removed without
dash panel removal

99-9107B KIT ASSEMBLY
Snap the DDIN brackets to the
inside edge of the radio housing.
(Figure B)
2
Cut and remove center divider
from radio housing. (Figure A)
1
Snap the DDIN trim-plate onto the
housing/radio assembly. (Figure C)
4
Slide the DDIN radio unit into the
DDIN bracket/radio housing
assembly and secure the unit to
the kit using the screws supplied
with the head unit. (Figure C)
3
Snap radio assembly into factory
radio opening.
6
Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-con-
nect the negative battery terminal
and test the unit for proper opera-
tion.
5
DOUBLE DIN HEAD UNIT PROVISION
A
B
C
4
NOTE: Once the dash kit is snapped
in, it cannot be removed without
dash panel removal

5
NOTES
99-9107B

99-9107B INSTRUCTIONS
1-800-221-0932 www.metraonline.com
REV. 10/26/09 © COPYRIGHT 2004-09 METRA ELECTRONICS CORPORA TION INST99-9107B