Metra Electronics 95-7339S User manual

METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
APPLICATIONS
1-800-221-0932 metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 95-7339
WIRING & ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness: • 70-7303 2009-Up Kia/Hyundai Harness
Antenna Adapter: • 40-KI11 2007-Up Kia Antenna Adapter
Hyundai Genesis Coupe 2.0 2010-up
(For models equipped with manual climate control)
95-7339B
95-7339S
• DDIN head unit provision
• ISO stacked head unit provision
• Painted to match factory finish
95-7339B=Black 95-7339S=Silver
Panel Removal Tool • Phillips Screwdriver • Small Flat Blade Screwdriver • Socket Wrench
A B C
• A) Trim Panel • B) Double DIN brackets • C) (6) PC-7503 Panel Clips
TOOLS REQUIRED
KIT FEATURES
KIT COMPONENTS

Table of Contents
Dash Disassembly
– Hyundai Genesis Coupe 2.0 2010-up 3
Kit Preparation
– Hyundai Genesis Coupe 2.0 2010-up 4
Kit Assembly
– Double DIN/stacked ISO DIN head unit provision 5
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
95-7339
Caution
Metra recommends disconnecting the negative battery terminal before beginning any
installation. All accessories, switches, and especially air bag indicator lights must be
plugged in before reconnecting the battery or cycling the ignition.
*NOTE: Refer also to the instructions included with the aftermarket radio.

1. Unclip and remove the shifter trim
panel. (Figure A)
2. Unclip and remove the radio/climate
control trim panel. (Figure B)
3. Unclip and remove the display trim
panel above radio. (Figure C)
4. Remove (4) Phillips screws securing
the radio.
5. Remove (4) Phillips screws securing the
climate control to the factory trim panel.
Continue to kit preparation
3
Dash Disassembly
95-7339
(Figure A)
(Figure B)
(Figure C)

4
95-7339
Kit Preparation
1. Attach the climate control to the
95-7339 trim plate using the factory
hardware. (Figure A)
2. Attach the (6) panel clips to the
95-7339 trim plate. (Figure B)
Continue to kit assembly
(Figure A)
(Figure B)

5
Kit Assembly 95-7339
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Attach the Double DIN brackets to the
aftermarket radio then mount the unit in
the sub dash. (Figure A)
3. Reassemble dash in reverse order of
disassembly using the 95-7339 trim
panel instead of the factory trim panel.
Double DIN/stacked ISO DIN
head unit provision
(Figure A)

Notes

Notes

METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 95-7339
REV. 5/17/11