Metra Electronics 95-5818 User manual

APPLICATIONS
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
REV. 11/4/2013 INST95-5818
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 95-5818
• DoubleDINradioprovision
NOTE:
• Majorsubdashmodificationsarenecessaryto
use this dash kit. You will need to trim the sub dash
to gain suitable depth and height.
•A)(2)DoubleDINtrimplates•B)DoubleDINbrackets
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS(soldseparately)
WiringHarness:
•70-1770-Fordharness1985-2004
•70-1771-Fordharness1998-up
•70-5519-Fordampinterfaceharness1998-2011
•70-5603-Fordampinterfaceharness1995-2002
•70-5701-Fordampinterfaceharness1998-2011
AntennaAdapter:
•Notrequired
•Dremelorcuttingtool•Smallflatblade
screwdriver•Panelremovaltool•Socketwrench
•Metra86-5618removalkeys
TOOLS REQUIRED
Ford/Lincoln 1997-2002
95-5818
See application list inside
AB
(a) (b)

Applications
2
Ford
Expedition.................................................1997-2002
F-150.......................................................1997-2003
F-150Heritage.................................................. 2004
F-250................................................................ 1998
Lincoln
Blackwood......................................................... 2002
Navigator..................................................1997-2002
Table of Contents
Dash Disassembly
– AllVehicles.......................................................... 2
Kit Assembly
– DoubleDINradioprovision................................... 3
All Vehicles
1. Unclipandremovethepanelsurroundingthe
radio.(FigureA)
2. UsingtheMetra86-5618removalkeys,slidethe
radiooutoftheradiocavity.Unplugandremove
theradio.(FigureB)
3. Removethe(4)7mmscrewsatthesidesofthe
factoryclimatecontrolandremovethefactory
climatecontrol.(FigureC)
4. Cutandremoveobstructionsindashcavity.
(FigureD)
Caution: Be careful not to cut into harnesses or
electronic components.
Continue to kit assembly
95-5818 Dash Disassembly
(Figure A)

3
Dash Disassembly
All Vehicles Double DIN radio provision
(Figure B) (Figure C)
(Figure D)
Kit Assembly
1. AttachthedoubleDINbrackets
totheradiousingthescrews
suppliedwiththeradio.(FigureA)
2. Locatethefactorywiringharness
inthedash.Metrarecommends
usingthepropermatingadapter
fromMetraorAXXESS.
3. Re-connectthenegativebattery
terminalandtesttheradiofor
properoperation.
4. SlidethedoubleDINradio
assemblyintothemodifiedsub
dashuntilitclicksintoplace.
5. AttachtheappropriatedoubleDIN
trimplateusingthetop(2)screw
positionsoftheclimatecontrol.
(FigureB)
6. Reassembletherestofthedashin
reverseorderofdisassembly.
(Figure A)
NOTE:Majorsubdashmodificationsarenecessarytousethisdashkit.
You will need to trim the sub dash to gain suitable depth and height.
(Figure B)
CUT OUT
TOP
CUT BAR CUT BAR
Cut bar Cut bar

METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
REV. 11/4/2013 INST95-5818
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
INSTALLATION INSTRUCTIONS FOR PART 95-5818