Metra Electronics 99-7404 User manual

INSTALLATION INSTRUCTIONS FOR PART 99-7404
1-800-221-0932 www.metraonline.com
©COPYRIGHT 2004-2007 METRA ELECTRONICS CORPORATION
KIT FEATURES
APPLICATIONS
NISSAN
Maxima 2004-2006
ISO DIN Head unit provision
with pocket
A) Radio Housing Panel • B) (4) Panel retaining Clips
KIT COMPONENTS
99-7404
A
Phillips Screwdriver • Small Flat Blade Screwdriver
SAALSDKFJHJLAzD JFLJKJK9E
B
TOOLS REQUIRED:

99-7404
NISSAN MAXIMA
Dash Disassembly ............................................................1-2
ISO DIN Head Unit Provision ................................................3
Final Assembly ....................................................................4
Notes....................................................................................5
TABLE OF CONTENTS

DASH DISASSEMBLY
2004-2006 NISSAN MAXIMA
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
1
Twist and slide down the cover at the
base of the shift knob. (Figure A)
2
Remove the retaining clip at base of
shift knob and pull up to remove.
(Figure B)
3
Unclip and remove panel surrounding
shift knob. (Figure C)
4
Remove (2) Phillips screws at the bot-
tom of the radio panel and unclip and
remove. (Figure E)
5
A
B
C
E
99-7404
1

2
DASH DISASSEMBLY
Remove (2) Phillips screws at the bottom
of the display panel and unclip and remove
the panel. (Figure F)
6
Remove (4) Phillips screws to remove
the audio/climate control/display as
one unit. (Figure G)
7
Remove (4) Phillips screws from each
side of radio/tuner to remove from
audio/climate control/display bracket
assembly.
8
Remove the (4) Phillips screws secur-
ing the factory climate control button
assembly to the radio panel and
remove. Note: Retain all hardware to
be used in Kit Assembly. (Figure H)
9
Remove (4) Phillips screws securing
the factory pocket assembly to the
radio panel and remove. Note: Retain
all hardware to be used in Kit
Assembly. (Figure I)
10
F
G
H
I
99-7404

3
KIT ASSEMBLY
ISO DIN HEAD UNIT PROVISIONS:
1
Position the aftermarket radio
into audio/climate control/dis-
play bracket assembly and
secure using the bottom (2)
Phillips screw positions and the
factory hardware. (Figure A)
3
Using the factory hardware
secure the factory climate
control button assembly into
the 99-7404. (Figure C)
4
Using the factory hardware
secure the factory pocket
assembly into the 99-7404.
(Figure D)
A
C
D
99-7404
2
Install the (4) supplied retaining
clips onto the 99-7404 in the
same locations as the factory
radio panel.
(Figure B)
B