Metra Electronics 95-5817 User manual

REV. 7/1/2016 INST95-5817
METRA. The World’s best kits.™metraonline.com © COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
Installation instructions for part 95-5817
CAUTION! All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
• ISO DDIN radio provision
Note:
• Sub-dash modifications are necessary to use this
dash kit. You will need to trim the sub-dash to gain
suitable depth and height.
• Once the kit is snapped in, it cannot be removed
without dash panel removal.
• A) ISO DDIN brackets • B) Filler bar
20;-,(;<9,:
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness:
• Please visit metraonline.com for wiring
harness options
Antenna Adapter:
• Not required
• Dremel/Cutting tool • Metra 86-5618 removal keys
;663:9,8<09,+
Ford multi-kit 1995-2011
95-5817
AB
(7730*(;065:
See application list inside cover

95-5817
Applications
2
Ford
Crown Victoria ....................................................................... 1995-2011
Econoline............................................................................... 1997-2008
Escape................................................................................... 2001-2007
Excursion............................................................................... 2000-2005
Explorer................................................................................. 1995-2001
Explorer Sport Trac................................................................ 2001-2005
F-250/350/450/550............................................................... 1999-2004
F-650/750 ............................................................................. 2000-2010
Ranger................................................................................... 1995-2011
Windstar................................................................................ 1999-2003
Lincoln
Continental ............................................................................ 1995-1997
Mark VIII ................................................................................ 1995-1998
Town Car............................................................................... 1995-2002
Mazda
B-Series Pickup..................................................................... 1995-2009
Mercury
Cougar (with 6 disc in-dash)...................................................... 2000-2002
Grand Marquis....................................................................... 1995-2011
Marauder............................................................................... 2003-2004
Mariner.................................................................................. 2005-2007
Mountaineer .......................................................................... 1997-2001
Dash Disassembly
- All Vehicles............................................... 3
Ford Crown Victoria 1995-2011
Ford Econoline 1997-2008
Ford Escape 2001-2007
Ford Excursion 2000-2005
Ford Explorer 1995-2001
Ford Explorer Sport Trac 2001-2005
Ford F-250/350/450/550 1999-2004
Ford F-650/750 2000-2010
Ford Ranger 1995-2011
Ford Windstar 1999-2003
Lincoln Continental 1995-1997
Lincoln Mark VIII 1995-1998
Lincoln Town Car 1995-2002
Mazda B-Series Pickup 1995-2009
Mercury Cougar (with 6 disc in-dash) 2000-2002
Mercury Grand Marquis 1995-2011
Mercury Marauder 2003-2004
Mercury Mariner 2005-2007
Mercury Mountaineer 1997-2001
Kit Assembly
- ISO DDIN radio provision .......................... 3
Table of Contents

95-5817
3
Dash Disassembly
All vehicles
1. Using the Metra 86-5618 removal keys, slide the
radio out of the radio cavity. Unplug and remove
the radio.
2. Cut and remove obstructions in dash cavity.
ATTENTION: Be careful not to cut into harnesses
or electronic components.
Continue to kit assembly
ISO DDIN radio provision
1. Attach the ISO DDIN brackets to the radio using the
screws supplied with the radio. (Figure A)
2. Locate the factory wiring harness in the dash. Metra
recommends using the proper mating adapter from
Metra or AXXESS. Test the radio for proper operation.
3. Slide the completed assembly into the modified sub-
dash until it clicks into place.
4. Clip the filler bar into the bottom of the radio opening
under the radio assembly with the rounded edges
facing toward the dash. Tip: Hook one side in then
push the other side in until it clips. (Figure B)
Kit Assembly
(Figure A) (Figure B)
(Figure A)
CAUTION:
ONCE THE KIT IS SNAPPED IN, IT
CANNOT BE REMOVED WITHOUT
DASH PANEL REMOVAL.

REV. 7/1/2016 INST95-5817
METRA. The World’s best kits.™metraonline.com © COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
Installation instructions for part 95-5817
IMPORTANT
If you are having difficulties with the
installation of this product, please call our
Tech Support line at 1-800-253-TECH.
Before doing so, look over the instructions a
second time, and make sure the installation
was performed exactly as the instructions
are stated. Please have the vehicle apart
and ready to perform troubleshooting steps
before calling.