Metra Electronics 99-9103 User manual

INSTALLATION INSTRUCTIONS FOR PART 99-9103
86-9001 Head Unit Removal Keys • Flat Blade Screwdriver
1-800-221-0932 www.metraonline.com
KIT FEATURES
©COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
APPLICATIONS
Audi A4 2001-2007
•DIN Head Unit Provisions
A) Radio Housing
KIT COMPONENTS
TOOLS REQUIRED:
99-9103
A
WITH THE CONCERT RADIO

99-9103
• Dash Disassembly
•Audi A4 - 2001-2007 ----------------------------------------- 1
• Kit Assembly
-DIN Head Unit Provision -------------------------------------- 2
• Final Assembly -------------------------------------------------- 3
TABLE OF CONTENTS
K NOWLEDGE IS P OWER
Enhanceyour installation and fabrication skillsby
enrolling in the most recognizedandrespected
mobile electronics school in our industry.
Log onto www.installerinstitute.comor call
800-354-6782 for more informationandtake steps
toward abetter tomorrow.

99-9103
1
DASH DISASSEMBLY
AUDI A4 2001-2007
Disconnect the negative battery terminal
to prevent an accidental short circuit.
Insert Metra’s 86-9001 into the slots in
the factory head unit and pull the unit out.
Figure A
1
2
Disconnect the wiring.
3
A

99-9103
2
KIT ASSEMBLY
DIN Head Unit Provision
1Slide the DIN cage into the Radio
Housing and secure by bending
the metal locking tabs down.
2Slide the after-market head unit
into the cage until secure.

99-9103
3
FINAL ASSEMBLY
FINAL ASSEMBLY
A
Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter and making the connections as
shown. (Isolate and individually tape off the
ends of any unused wires to prevent electrical
short circuit) Figure A
Re-connect the negative battery terminal and test
the unit for proper operation.
A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape
1
2
Snapradio housing assembly into factoryradio
opening.
3
B
C
D

99-9103
4
NOTES

99-9103
5
NOTES

1-800-221-0932 www.metraonline.com
©COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION REV. 04-16-09