Metra Electronics 95-9607B User manual

CAUTION! All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 3/27/18 INST95-9607B
INSTALLATION INSTRUCTIONS
95-9607B
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
KIT COMPONENTS
• A) Radio housing with brackets and trim
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Torx screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: TBA
Antenna Adapter: 40-EU10 (w/NAV)
40-EU56 (w/o NAV)
A
Porsche
911 (991) 2012-2016
Boxster (981) 2013-2016
Caymen (981) 2014-2016

1.800.221.0932
|
MetraOnline.com
2
1. Unclip the center console side panels
starting from the rear, then pull back to
release the front of the panels.
(Figure A)
2. Remove (4) Torx screws securing the
radio, then unplug and remove the
radio. (Figure B)
Continue to Kit Assembly
DASH DISASSEMBLY
Please visit Metraonline.com for
Dash Disassembly illustrations.

REV. 3/27/2018 INST95-9607B 3
KIT ASSEMBLY
(Figure A)
1. Slide the radio into the 95-9607B
assembly from the back, and then
secure the radio using the screws
provided with the radio. (Figure A)
2. Locate the factory wiring harness and
antenna connection in the dash, and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
3. Secure the completed assembly to the
dash using the factory screws.
4. Reassemble the dash in reverse
order of disassembly to complete the
installation.

KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
IMPORTANT
If you are having difficulties with the installation of this product,
please call our Tech Support line at 1-800-253-TECH. Before
doing so, look over the instructions a second time, and make
sure the installation was performed exactly as the instructions
are stated. Please have the vehicle apart and ready to perform
troubleshooting steps before calling.
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 3/27/18 INST95-9607B
INSTALLATION INSTRUCTIONS
95-9607B