Midea MIH740F238K0 User manual

*整版更新-彭娟-20230505

Warning notices: Before using this product, please read this manual carefully and keep it for future reference.
The design and specifications are subject to change without prior notice for product improvement.
Consult with your dealer or manufacturer for details.
The diagram above is just for reference. Please take the appearance of the actual product as the standard.
INDUCTION HOB
USER MANUAL
MIH740F238K0

LANGUAGES
EnglishEN
ItalianI T
GreekGR

EN

EN

SAFETY WARNINGS
INSTALLATION
EN

EN

OPERATION AND MAINTENANCE
EN

EN

EN
MIH740F238K0

EN

EN

EN

EN

EN

EN

EN
bracket
HOB
TABLE
A
HOB
TABLE
B
B ACKET B ACKET

EN
15
• If the cable is damaged or to be replaced, the operation must be carried out the by after-sale agent
with dedicated tools to avoid any accidents.
• If the appliance is being connected directly to the mains an omnipolar circuit-breaker must be
installed with a minimum opening of 3mm between contacts.
• The installer must ensure that the correct electrical connection has been made and that it is compliant
with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised technicians only.
Connecting The Hob To The Mains Power Supply
This hob must be connected to the mains power supply only by a suitably qualified person.
Before connecting the hob to the mains power supply, check that:
1. the domestic wiring system is suitable for the power drawn by the hob.
2. the voltage corresponds to the value given in the rating plate.
3. the power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or branching
devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without alterations. Any
alterations must only be made by a qualified electrician.
The bottom surface and the power cord of the hob are not accessible after installation.
220-240V~
220-240V~
220-240V~
220-240V~
220-240V~
N2 N1 L2 L1
Yellow / Green
Black
Brown
Grey
Blue
Yellow / Green
Black
Brown
Grey
Blue
Yellow / Green
Black
Brown
Grey
Blue
N2 N1 L2 L1 N2 N1 L2 L1
400V~

EN