Mitsubishi FR-E800 Series Instruction Manual

Mitsubishi Inverter
FR-E800 Series
Sample Screen Manual
Mitsubishi Electric Corporation

2/79
BCN-P5999-1305-1c
Using the Samples
The sample screen data and files such as the instruction manual can be used upon agreement to the following
matters.
(1) This data is available for use by customers currently using or considering use of Mitsubishi
products.
(2) The intellectual property rights of the files provided by Mitsubishi (hereinafter referred to as the
“Files”) belong to Mitsubishi.
(3) Alteration, reproduction, transfer, or sales of the Files is prohibited.
This does not apply when the content, in part or full, is used for Mitsubishi products incorporated
in a device or system created by the customer. Furthermore, this does not apply to the transfer,
reproduction, reference, or change of layout in the specifications, designs, or instruction
manuals of built-in products prepared by the customer using Mitsubishi products.
(4) Mitsubishi will not be held liable for any damages resulting from the use of the Files or the data
extracted from the Files. The customer is responsible for all use.
(5) If any usage conditions are appended to the Files, those conditions must be observed.
(6) The Files may be deleted or the contents changed without prior notice.
(7) When using the Files, please always read the corresponding manuals and related manuals
indicated therein. Please pay special attention to safety, and correctly handle the product.
■Reference document
Manual
Control No.
Revised
INVERTER FR-E800 Instruction Manual (Function)
IB(NA)-0600868ENG-A
Dec. 2019
INVERTER FR-E800 Instruction Manual (Communication)
IB(NA)-0600871ENG-A
Dec. 2019
INVERTER FR-E800 Instruction Manual (Maintenance)
IB(NA)-0600874ENG-A
Dec. 2019
三菱電機汎用インバータ E800 取扱説明書(機能編)
IB(名)-0600867-A
Dec. 2019
三菱電機汎用インバータ E800 取扱説明書(通信編)
IB(名)-0600870-A
Dec. 2019
三菱電機汎用インバータ E800 取扱説明書(保守編)
IB(名)-0600873-A
Dec. 2019
三菱电机通用变频器E800 使用手册 (功能篇)
IB(NA)-0600869CHN-A
Dec. 2019
三菱电机通用变频器E800 使用手册 (通讯篇)
IB(NA)-0600872CHN-A
Dec. 2019
三菱电机通用变频器E800 使用手册 (维护篇)
IB(NA)-0600875CHN-A
Dec. 2019

3/79
BCN-P5999-1305-1c
CONTENTS
REVISIONS ....................................................................................................................................................................5
1. OUTLINE.................................................................................................................................................................7
2. SYSTEM CONFIGURATION ..................................................................................................................................7
3. GOT.........................................................................................................................................................................8
3.1 Supported Models ...........................................................................................................................................8
3.2 System Applications that are Automatically Selected......................................................................................8
3.3 Controller Settings of Screen Design Software...............................................................................................8
3.4 GOT Ethernet Setting of Screen Design Software..........................................................................................9
3.5 Graphics mode (Graphics Setting)..................................................................................................................9
4. Inverter FR-E800-E.............................................................................................................................................. 10
4.1 Inverter FR-E800-E Communication Settings .............................................................................................. 10
4.2 The Input Terminal Assignment Settings.......................................................................................................11
4.3 The Output Terminal Assignment Settings ....................................................................................................11
5. SCREEN SPECIFICATIONS ............................................................................................................................... 12
5.1 Screen Specifications................................................................................................................................... 12
5.1.1 Common Items of Each Screen............................................................................................................ 12
5.1.2 Main Menu (B-12000)........................................................................................................................... 13
5.1.3 Parameter (List) (B-12100)................................................................................................................... 14
5.1.4 Parameter (Bookmark) (B-12110) ........................................................................................................ 15
5.1.5 Op. Cmnd (Op. Procedure) (B-12120) ................................................................................................. 16
5.1.6 Op. Cmnd (Op. during inv. op.) (B-12121)............................................................................................ 17
5.1.7 Batch Monitor 1 to 2 (B-12200 to 12201) ............................................................................................. 18
5.1.8 Alarm History (Inverter) (B-12300) ....................................................................................................... 19
5.1.9 Machine diag.(load char. meas.) (B-12310) ......................................................................................... 20
5.1.10 Inverter Life Diagnosis 1 to 2 (B-12320 to 12321)................................................................................ 21
5.1.11 Manual Display (B-12900).................................................................................................................... 22
5.1.12 Station Number Switching (B-14000)................................................................................................... 23
5.1.13 Parameter Storage (Recipe) (B-14100) ............................................................................................... 24
5.1.14 Parameter Copy (Recipe) (B-14101).................................................................................................... 25
5.1.15 Backup Execution (B-14103)................................................................................................................ 26
5.1.16 Restoration Execution (B-14104) ......................................................................................................... 27
5.1.17 Copy Execution (B-14105) ................................................................................................................... 28
5.1.18 Machine Diagnosis Execution (B-14301) ............................................................................................. 29
5.1.19 Machine Diagnosis Start Warning (B-14302)....................................................................................... 30
5.1.20 Logging (B-14900)................................................................................................................................ 31
5.1.21 Option Settings (B-32000).................................................................................................................... 32
5.1.22 System Alarm (GOT) (B-32001) ........................................................................................................... 33
5.2 Screen Operation ......................................................................................................................................... 34
5.2.1 How to Register/Remove Parameters in [Parameter(Bookmark)] ....................................................... 34
5.2.2 How to Operate Machine Diagnosis (Load Characteristics Measurement) ......................................... 36
5.3 Device List.................................................................................................................................................... 39
5.3.1 Controller Devices ................................................................................................................................ 39
5.3.2 GOT Internal Devices........................................................................................................................... 39
5.3.3 Label (GT Desinger3)........................................................................................................................... 42
5.4 Comment...................................................................................................................................................... 43
5.5 Recipe........................................................................................................................................................... 43
5.6 Script............................................................................................................................................................. 44

4/79
BCN-P5999-1305-1c
6. Utilize Sample Screen.......................................................................................................................................... 45
6.1 Checks Before Utilization ............................................................................................................................. 46
6.2 Utilization Procedure .................................................................................................................................... 47
6.2.1 How to Open the Sample Screen Installed to GT Designer 3.............................................................. 48
6.2.2 Preparation before Utilization............................................................................................................... 49
6.2.3 Utilize Another Project .......................................................................................................................... 51
6.3 Works after Utilization................................................................................................................................... 53
6.3.1 Settings of Label (GT Designer3)......................................................................................................... 53
6.3.2 Settings of GOT Environmental Setting ............................................................................................... 54
6.3.3 Settings of Project Script ...................................................................................................................... 57
7. User Customize.................................................................................................................................................... 58
7.1 How to Display the Specified Parameters in [Parameter (List)] Screen....................................................... 58
7.2 Document Data Used in [Manual Display (B-12900)] Screen...................................................................... 60
7.3 RS-485 Connection ...................................................................................................................................... 63
7.3.1 Controller Setting of GOT..................................................................................................................... 63
7.3.2 Inverter FR-E800 Communication Settings.......................................................................................... 64
7.3.3 Settings of Sample Screen................................................................................................................... 65
7.4 Connecting GOT and Inverter via PLC (Ethernet)........................................................................................ 66
7.4.1 Controller Setting of GOT..................................................................................................................... 67
7.4.2 PLC Side Settings (GX Works3)........................................................................................................... 68
7.4.3 Inverter FR-E800-E Communication Settings ...................................................................................... 69
7.4.4 Settings of Sample Screen................................................................................................................... 69
7.5 Connecting GOT and Inverter via PLC (CC-Link IE TSN)............................................................................ 70
7.5.1 Controller Setting of GOT..................................................................................................................... 71
7.5.2 PLC Side Settings (GX Works3)........................................................................................................... 71
7.5.3 Inverter FR-E800-E Communication Settings ...................................................................................... 72
7.5.4 Settings of Sample Screen................................................................................................................... 72
7.5.5 Precautions........................................................................................................................................... 72
7.6 Changing the Communication Settings of the Inverter from CH1 in [Controller Setting] ............................. 73
7.7 Changing the Inverter Network No. and Station No..................................................................................... 74
8. Limitations............................................................................................................................................................ 77
8.1 Limitations of Link Devices........................................................................................................................... 77
8.2 Switching from the User Screen................................................................................................................... 77
8.3 SD Card........................................................................................................................................................ 77
9. Precautions .......................................................................................................................................................... 78
9.1 When Having Changed the Settings of Recipe Function Set in This Sample Screen ................................. 78
9.2 Trigger of Recipe Function ........................................................................................................................... 78
9.3 When the SD Card or the SRAM User Area of the GOT Does Not Have the Sufficient Available Space.... 78
10. Trademarks.......................................................................................................................................................... 79

5/79
BCN-P5999-1305-1c
REVISIONS
Sample Screen Manual
Date
Control No.*
Description
2020/4
BCN-P5999-1305
First edition
2020/4
BCN-P5999-1305-1a
Correction of errors
・Corrected the screen No. of "5.1.4 Parameter
(Bookmark)"
2020/9
BCN-P5999-1305-1b
Correction of errors
・Add remarks of "5.1.10 Inverter Life Diagnosis 1
to 2"
・Corrected the Set value of "7.3.2 Inverter
FR-E800 Communication Settings"
・Corrected the Set value of "7.7 Changing the
Inverter Network No. and Station No. "
2020/11
BCN-P5999-1305-1c
No revision
* The control No. is noted at the lower right of each page.
Project Data
Date
Project Data
GT Designer3*
Description
2020/4
MITSUBISHI_FR-E800-E_V_Ver1_E.GTX
1.235V
First edition
2020/4
MITSUBISHI_FR-E800-E_V_Ver1a_E.GTX
1.235V
No revision
2020/9
MITSUBISHI_FR-E800-E_V_Ver1b_E.GTX
1.235V
Corrected the Parameter name
2020/11
MITSUBISHI_FR-E800-E_V_Ver1c_E.GTX
1.250L
Supported version of GT
Designer3 was changed.
* The version number of screen design software used to create the project data is listed. Please use the screen
design software with the listed version or later versions.
* GOT Graphic Ver.2 is used as graphics setting.

6/79
BCN-P5999-1305-1c

7/79
BCN-P5999-1305-1c
1. OUTLINE
This manual explains the sample screens of GOT2000 connected to a FR-E800-E inverter via Ethernet. The sample
screens can be used to change the running speed, rotation direction, and the parameters as well as to monitor the
current values and execute machine diagnosis (load characteristics measurement).
By changing the controller settings, the following connections are supported.
(a)When connecting GOT2000 to inverter FR-E800 in RS-485 connection.
(b)When connecting GOT2000 to MELSEC iQ-R/Q/L series PLC and then connecting the PLC to inverter FR-E800-E
via Ethernet interface unit/CC-Link IE TSN master/local module.
Please refer to "7. User Customize" for how to change [Controller Setting] and "8. Limitations" for the limitations
regarding CC-Link IE TSN.
2. SYSTEM CONFIGURATION
*1: The SD card is used for the recipe function and document display function.
*2: The battery is used to back up the clock data and the recipe data in the SRAM user area in case of power
failures. (The battery is included as standard in the GOT.)
*3: For more details on the cable, please refer to "GOT2000 Series Connection Manual (Mitsubishi
Products)".
*4: The recommended number of devices is up to 16 in this sample screen.
■Additional Explanation
・This sample screen can also be used for connecting the GOT to inverters via PLC.
Please refer to "7. User Customize" for details.
・This sample screen assumes the inverter connection via the channel No.1, network No.1 and station No.1
to 16. When the inverter is connected via other channels, networks or station numbers, please refer to "7.
User Customize".
Ethernet cable*3
GOT2000
・GT27**-V (640×480)
・Interface:
Standard I/F (Ethernet)
・SD card *1
・Battery (GT11-50BAT) *2
・FR-E800 (-E) *4
・Interface:
Ethernet
Motor
Hub
・FR-E800 (-E) *4
・Interface:
Ethernet
Motor

8/79
BCN-P5999-1305-1c
3. GOT
3.1 Supported Models
The following GOTs are compatible with this sample screen.
・GT27 model
・GT25 model
* This sample screen is created in GT27**-V (640×480).
Please refer to "GT Designer3 (GOT2000) Screen Design Manual" for how to change the GOT model.
3.2 System Applications that are Automatically Selected
Type
System Application Name
Standard Function
Standard System Application
Standard Font
Japanese
Communication Driver
Ethernet Connection
Ethernet (FREQROL (Batch monitor) ), Gateway
Extended Function
Standard Font
Chinese (Simplified)
Outline Font
Gothic
Alphanumeric/Kana
Japanese(Kanji)
Chinese(Simplified)
Key Window Design Information
Recipe Display (Record List)
Document Display
Document Display (PDF)
PDF Search/Bookmark function
3.3 Controller Settings of Screen Design Software
Setting for Each Channel
CH
Item
Set value
Remarks
CH1
Manufacturer
MITSUBISHI ELECTRIC
Controller Type
FREQROL 800/E700NE (Batch monitor)
I/F
Ethernet:Multi
CH2
None
CH3
None
CH4
None
CH1 Detail Setting
Item
Set value
Remarks
GOT NET No.
1
GOT Station
18
GOT Communication Port No.
5036
Retry (Times)
3
Startup Time (Sec)
3
Timeout Time (Sec)
3
Delay Time (ms)
0
CH1 Connected Ethernet Controller Setting
Host
Net No.
Station
Unit Type
IP Address
Port No.
Communication
1
*
1
1
FREQROL
192.168.3.50
5001
UDP

9/79
BCN-P5999-1305-1c
3.4 GOT Ethernet Setting of Screen Design Software
GOT IP Address Setting
Port
Item
Set value
Remarks
Standard Port
Update GOT Ethernet Standard Port setting
Checked
GOT IP Address
192.168.3.18
Subnet Mask
255.255.255.0
Extended Port
None
Wireless LAN
None
GOT Ethernet Common Setting
Item
Set value
Remarks
Default Gateway
0.0.0.0
Peripheral S/W Communication Port No.
5015
Transparent Port No.
5014
3.5 Graphics mode (Graphics Setting)
Graphics mode is GOT Graphic Ver.2.

10/79
BCN-P5999-1305-1c
4. Inverter FR-E800-E
4.1 Inverter FR-E800-E Communication Settings
Set the parameters of communication settings with PU (operation panel or parameter unit). An inverter reset after
the setting is required for the parameters of the communication settings.
Item
Parameter
Set value
Remarks
Operation mode selection
Pr.79
0
(Default value)
*2
Communication startup mode
selection
Pr.340
10
(Default value)
*2
Communication EEPROM write
selection
Pr.342
0
(Default value)
*2
PLC function operation selection
Pr.414
0
(Default value)
*2 *3
Stop mode selection at
communication error
Pr.502
0
(Default value)
*2
Protocol selection
Pr.549
0
(Default value)
NET mode operation command
source selection
Pr.550
5
*2
Operation frequency during
communication error
Pr.779
9999
(Default value)
*2
Ethernet communication network
number
Pr.1424
1 to 239
*1
Ethernet communication station
number
Pr.1425
1 to 120
*1
Link speed and duplex mode
selection
Pr.1426
0
(Default value)
*2
Ethernet function selection 1
Pr.1427
5000 to 5002,
5006 to 5008
*1
Ethernet function selection 2
Pr.1428
9999
*2
Ethernet function selection 3
Pr.1429
9999
*2
Ethernet signal loss detection
function selection
Pr.1431
0
*2
Ethernet communication check
time interval
Pr.1432
9999
*2
Ethernet IP address 1
Pr.1434
0 to 255
*1
Ethernet IP address 2
Pr.1435
*1
Ethernet IP address 3
Pr.1436
*1
Ethernet IP address 4
Pr.1437
*1
Subnet mask 1
Pr.1438
255
(Default value)
*1 *2
Subnet mask 2
Pr.1439
255
(Default value)
*1 *2
Subnet mask 3
Pr.1440
255
(Default value)
*1 *2
Subnet mask 4
Pr.1441
0
(Default value)
*1 *2
*1: Settings of the GOT can be changed. When changing the settings, also change the settings of the inverter.
*2: Change the settings depending on the operation environment.
*3: Because the default value of the inverter is "0: disabled", change the value to 1 or 2 when using PLC function.
[Additional Explanation]
When trying to monitor the devices of the PLC such as X and Y at the time when Pr.414 "PLC function operation
selection" is "0: disabled", the system alarm "322 Dedicated device is out of range. Confirm
device range." is output.

11/79
BCN-P5999-1305-1c
4.2 The Input Terminal Assignment Settings
In this sample, operation commands are input on the GOT screen with the following functions of input terminals. The
input terminals and the assigned functions are listed in the table below.
Item
Parameter
Set Value
Function
RL terminal function selection
Pr.180
0
Low-speed operation command
RM terminal function selection
Pr.181
1
Middle-speed operation command
RH terminal function selection
Pr.182
2
High-speed operation command
4.3 The Output Terminal Assignment Settings
In this sample, the functions are assigned to the output terminals and the output signals are displayed on the GOT
screen. The output terminals and the assigned functions are listed in the table below.
Item
Parameter
Set Value
Function
Output Terminal ABC
Pr.192
99
Abnormal

12/79
BCN-P5999-1305-1c
5. SCREEN SPECIFICATIONS
5.1 Screen Specifications
This section explains the details of the screens in this sample.
Operations performed according to instructions in the screens described as "***execution" in this manual.
5.1.1 Common Items of Each Screen
Outline
Functions and settings common in each screen are described
The common items are not applied to the screens below.
・[Station Number Switching] screen (B-14000) to [Machine Diagnosis Start Warning] screen (B-14302)
・[Option Settings] screen (B-32000)
・[System Alarm (GOT)] screen (B-32001).
Description
1. Switches to [Station Number Switching] screen.
2. Displays the station number and the axis name selected on [Station Number Switching] screen. Axis
name can be changed to the name specified by the user. When changing the axis name, edit comment
No.1 to 16 of the comment group No.340.
3. Notifies users of the alarm occurrence of the inverter. Lights red when an alarm is occurring.
Touch this icon to switch to [Alarm History (Inverter)] screen.
4. Displays the current date and time. Touch the date and time to switch to [Option Settings] screen.
5. Displays [Option Settings] screen.
6. Notifies users of the system alarm occurrence of the GOT. Lights yellow when an alarm is occurring.
Touch this icon to switch to the system alarm screen.
7. Switches to [Main Menu] screen.
8. Switches to the previously displayed screen.
9. Switches between the screens. The blue switch that indicates the currently displayed screen does not
switch the screen.
Touch the arrow icon to switch the destination screen.
Remarks
7
5
9
8
1
3
4
2
6

13/79
BCN-P5999-1305-1c
5.1.2 Main Menu (B-12000)
Outline
This screen is displayed when turning on the sample screen. Each function screen can be switched to from
this screen.
Description
1. Switches between the screens.
2. Switches to [Manual Display] screen.
"3. Parameters" of "INVERTER FR-E800 Instruction Manual (Function)" is displayed in Startup and
Operation.
"2. Protective Functions" of "INVERTER FR-E800 Instruction Manual (Maintenance)" is displayed in
Maintenance.
Remarks
・Reads the data required for the operation of the sample screen everytime the main menu is displayed after
turning on the GOT. The screen cannot be operated during reading the data.
1
2

14/79
BCN-P5999-1305-1c
5.1.3 Parameter (List) (B-12100)
Outline
This screen is used to display and set the parameters of the inverter connected to the GOT.
Description
1. Switches between the screens.
2. Displays parameter names and set values. Touch the set values to change them.
Touch the switches in [Regi.] column to register the parameters as bookmarked parameters and
display them in [Parameter (Bookmark)] screen.
Touch the switch again to deselect the registered bookmarked parameters.
3. Switches to [Manual Display] screen.
(Displayed manual: "3. Parameters" of "INVERTER FR-E800 Instruction Manual (Function)")
4. Displays the current page number and the total number of pages of Parameter (List).
Touch the current page number to change the page to display.
5. Switches the displayed page of the parameters.
Remarks
・The units of the parameters cannot be changed.
・Bookmark registration is common in the all station numbers.
・When inputting the value which is out of the setting range of the inverter, the system alarm "315 Device
writing error. Correct device." occurs.
3
5
1
4
2

15/79
BCN-P5999-1305-1c
5.1.4 Parameter (Bookmark) (B-12110)
Outline
This screen is used to display and set the parameters registered in the Parameter (List) screen.
Description
1. Displays parameter names and set values. Touch the values to change them.
2. Switches to [Manual Display] screen.
(Displayed manual: "3. Parameters" of "INVERTER FR-E800 Instruction Manual (Function)")
3. Displays the current page number and the total number of the pages of Parameter (Bookmark). Touch
the current page number to change the page to display.
4. Switches the displayed page of the parameters.
Remarks
・The units of the parameters cannot be changed.
・Bookmark registration is common in the all station numbers.
・When inputting the value which is out of the setting range of the inverter, the system alarm "315 Device
writing error. Correct device." occurs.
1
4
2
3

16/79
BCN-P5999-1305-1c
5.1.5 Op. Cmnd (Op. Procedure) (B-12120)
Outline
This screen explains how to execute operation commands to the inverter connected to the GOT.
Operation commands are performed according to the order (STEP) on the screen.
Description
1. Sets the speed or the operation frequency of the inverter operation.
Low Speed/Middle Speed/High Speed : Selects the speed of the inverter operation from 3-speed
operation ([Low Speed], [Middle Speed] or [High Speed]).
Touch [STOP] switch to deselect the selected speed operation
switch.
Running Frequency (Hz) : Sets the operation frequency of the inverter. Sets the frequency by
inputting a numeric value or incrementing or decrementing the
frequency by 1Hz with touch switches on the left and right sides of
the value input area (the switches can be held down). When
3-speed operation is enabled, the settings of 3-speed operation
have priority.
2. Notifies the inverter of the operation command. The motor rotates and stops according to the operation
of each switch.
3. Switches to [Op. Cmnd (Op. during inv. op.)] screen.
Remarks
・When the inverter is in the NET operation mode, commands can be input to the inverter by the GOT. When
using this screen, please use the inverter in the NET operation mode.
・When connecting GOT2000 to the inverter via CC-Link IE TSN, [Forward] or [Reverse] cannot be
performed. Please refer to "8.1 Limitations of Link Devices" for details.
・Selection status of 3-speed operation switch is the status selected in the GOT last time.
1
2
3

17/79
BCN-P5999-1305-1c
5.1.6 Op. Cmnd (Op. during inv. op.) (B-12121)
Outline
This screen is used to execute operation commands and operate the inverter connected to the GOT.
Description
1. The output frequency and the output current are displayed. The panel meters operate with the
numerical displays.
2. Displays the inverter status.
Operating Status of Inverter : Displays Stop/Forward Rotation/Reverse Rotation/Machine Error
Occurring.
Inverter Fault : Lights red when an ALM (fault) is occurring.
Remarks
・When the inverter is in the NET operation mode, commands can be input to the inverter by the GOT. When
using this screen, please use the inverter in the NET operation mode.
・When connecting GOT2000 to the inverter via CC-Link IE TSN, [Forward] or [Reverse] cannot be
executed. Please refer to "8.1 Limitations of Link Devices" for details.
・"Machine Error Occurring" is displayed when an ALM (fault) is occurring.
・Selection status of 3-speed operation switch is the status selected in the GOT last time.
2
1

18/79
BCN-P5999-1305-1c
5.1.7 Batch Monitor 1 to 2 (B-12200 to 12201)
Outline
This screen is used to monitor the monitoring items of the inverter connected to the GOT in a batch.
Description
1. Displays names and the current values of monitoring items
2. Switches the monitoring items to display.
Remarks
1
2

19/79
BCN-P5999-1305-1c
5.1.8 Alarm History (Inverter) (B-12300)
Outline
This screen is used to confirm the fault (failure) currently occurring and the alarm history of the inverter
connected to the GOT.
Description
1. Displays the fault (failure) currently occurring.
2. Displays the alarm history of the latest eighth faults (failure).
3. Switches to [Manual Display] screen.
(Displayed manual: "2. Protective Functions" of "INVERTER FR-E800 Instruction Manual
(Maintenance)").
4. Executes the inverter reset. (Operates when holding down the switch for 3 seconds).
Use this switch when performing the inverter reset after completing dealing with the fault (failure)
currently occurring.
5. Executes the all clear of the alarm history. (Operates when holding down the switch for 3 seconds).
Remarks
・The system alarm "401 An error response has been received from the connected device" occurs when
connecting the GOT to the inverter via PLC with CC-Link IE TSN and executing the inverter reset.
Therefore display [Alarm History (Inverter)] screen again after the communication with the inverter recovers
to restart the monitoring.
5
1
2
3
4

20/79
BCN-P5999-1305-1c
5.1.9 Machine diag.(load char. meas.) (B-12310)
Outline
This screen is used to display and set the parameters regarding load characteristics of the inverter
connected to the GOT.
Touch [Auto measure] switch to notify the inverter of the start command of load characteristics
measurement.
Description
1. Sets the standard value for the normal load characteristics.
2. Displays the image (PNG file) of the overload and normal load ranges for load characteristics
measurement. The graph is being fixed and does not move.
3. Sets the speed (minimum and maximum frequency) for performing the load characteristics
measurement.
4. Displays [Machine Diagnosis Execution] screen.
5. Displays the output frequency being measured.
6. Sets the upper and lower limit warning detection width.
7. Lights yellow when Load Fault Warning is occurring.
Remarks
・When the inverter is in the NET operation mode, commands can be input to the inverter by the GOT. When
using this screen, please use the inverter in the NET operation mode.
・When connecting GOT2000 to the inverter via CC-Link IE TSN, [Auto measure] cannot be performed.
Please refer to "8.1 Limitations of Link Devices" for details.
・Perform the machine diagnosis after confirming that warnings are not occurring on the inverter side.
1
3
2
5
7
6
4