Mizuho MOS-1302B User manual

Operating Table Operator’s Manual
MOS-1302B
The operating table is designed to support a patient during surgical procedures. Using
it for other purposes may result in damage or injury.
The operator and the person in charge of the maintenance of this operating table
MUST read this Operating Table Instruction Manual carefully and understand the
contents before operating, inspecting, adjusting, or servicing the table.
Keep this Manual where it is readily accessible for reference by those concerned
in case of need.
Sale Agent
Manufacturer:
Mizuho Medical Co., Ltd.
Hongo Is hiwata building 7F 3 - 38-1 , H o ngo,
Bunkyo -k u , Tokyo 113 -0033 , Japan.
3-30 -13 Hongo, Bunkyo -k u
Toky o 113 -0033, Japan
MES-CK18-470-11EN Ver.4 2021-06-18

Contents
1 Introduction ...........................................1
2 Before use..............................................5
3 Component identication ....................15
Main unit ..............................................................................16
Control unit..........................................................................17
4 Operation .............................................19
Installation and battery charging.......................................20
Switch On/Off power...........................................................25
In case of emergency..........................................................27
Lock and unlock the operating table.................................28
Brake Release......................................................................29
Lateral tilt .............................................................................30
Trendelenburg ....................................................................32
Tilt the back plate ................................................................33
Change height of the tabletop ...........................................34
Tilt the seat plate .................................................................35
Return to level .....................................................................37
Adjustment of head plate ...................................................38
Adjustment of seat plate ....................................................40
Adjustment of leg plate ......................................................41

1
Introduction
2
Before use
3
Component
identification
4
Operation
6
Maintenance
and inspection
7
Specifications
8
When the
control unit
can not be
used
5 Using the leg traction device .............45
The leg traction device components.................................46
Examples of combination of various leg traction
device components.............................................................47
Femoral neck fracture procedure position .................47
Femoral shaft fracture procedure position ................51
Leg fracture procedure position .................................56
Attaching the lower limb support right/left..................60
Attaching/Detaching the traction shoe.........................61
6 Maintenance and inspection ...............63
Inspection before and after use.........................................64
Periodic replacement parts ................................................65
Version information of the software..................................65
7 Specications ......................................67
Specications......................................................................68
Appearance..........................................................................70
8 When the control unit can not be used ...71
9 Troubleshooting ...................................73
Troubleshooting ..................................................................74
In case of malfunction ........................................................75
App. Electromagnetic compatibility ......77
Electromagnetic Compatibility ..........................................78
5
Using the
leg traction
device
9
Troubleshooting
APP
Electromagnetic
compatibility

1
1
Introduction
1 Introduction

2
1
Introduction

3
1
Introduction
This Manual is intended to support the safe and effective operation of the operating table.
Read this Manual carefully and familiarize yourself thoroughly with its contents (operation,
inspection, adjustment, servicing) before operating the table.
Using the table without following the instructions contained in this Manual may cause a serious
accident.
Safety information in this Manual and on the labels attached to the table is given in the following
three forms for easy and full understanding:
Introduction
WARNING
CAUTION
NOTE
A WARNING notice indicates a situation which can result
in death or serious injury to a person if the notice is
ignored and the table is handled improperly.
A CAUTION notice indicates a situation which can result
in injury to a person and/or damage to property if the
notice is ignored and the table is handled improperly.
Description under this heading gives supplementary
explanation of the functions of the table.
The WARNING and CAUTION notices in this Manual relating to the operation, inspection,
adjustment, or servicing of the table apply in using the table for surgical operations.
The user is solely responsible for safety if the table is operated, inspected, adjusted, or serviced in
a way not specied in this Manual.
This product is designed to support patients during surgical procedures.
This product has a functions to adjust the height of the tabletop and to position a patient's body.
Both a medical grade AC power and a battery are available as a power source.
This product is to be used by health care professionals, including but not limited to surgeons,
nurses and biomedical technicians.
n
About this product

Mattresses (for head, back, seat, and legs)
Operator’s manual
Main unit
Control unit
4
1
Introduction
Accessories

5
2
Before use
2 Before use

6
2
Before use
When the operating table is in use, never commit any of the following actions.
It may cause damage of the operating table, electric shock or re.
Any serious incident that has occurred in relation to the device should be reported to the
manufacturer and the competent authority in which the user and / or patient is established.
Please read carefully before use
Head plate or leg plate
- Do not sit on the head plate or
the leg plate(s).
Otherwise it may cause a
person to tumble off or to get
injured.
- Before lowering the table or placing it in
a reverse Trendelenburg position, check
if there are any devices under the leg
plates. If the leg plates come in contact
with devices that are to be subjected to
excessive force, the leg plate insertion
shaft may be damaged.
- When transferring a patient from the bed (Fig a) or
changing a patient’s body position (Fig b), do not apply
excessive force on the head plate or leg plate.
The operating table may get deformed or damaged.
Fig a when transferring a patient from
the bed
Fig b when changing a
patient’s body position
head plate
power cord
WARNING
CAUTION
CAUTION
head plate head plateleg plate leg plate
-Do not place any heavy object on the
power cord.
-Do not ride over the power cord with a
castered device.
-Do not pull the power cord forcefully.
-Do not place any objects in the
place where the power cord is to be
unplugged from the medical grade
outlet, which would obstruct it from
being unplugged.
WARNING Control unit
- Do not pull a cord of control
unit forcefully.
- Do not apply strong shock to
the control unit.
It may get damaged.
WARNING
Power cord