MJ LED LIGHTNING MJ-2042CR User manual

LED OUTDOOR WIRELESS
BATTERY PAR-1218
MJ-2042CR
User Manual
=======PROFESSIONAL STAGE LIGHTING ========
Thank you for choosing our outdoor LED wireless par can with battery light. For
the sake of your safety, Please read and follow these instructions carefully and keep
this manual in a safe place for future reference

Most important: FIRST CHARGE THE FIXTURES FOR 6-8 Hours on the First
Charge before use. Plug in Power cord. Turn ON charger Switch to charge.
Introduction
Unpacking: Thank you for purchasing this product, all products has been thoroughly tested
and has been shipped in perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your fixture for any damage and be sure all accessories necessary to operate
the unit has arrived intact. In the case damage has been found or parts are missing, please
contact the manufacturer or your dealer for further instructions. Do not return this unit to your
dealer without first contacting.
Introduction: The Light is a DMX intelligent and battery powered LED par light. This par
light is light weight and compact which makes it a great piece for mobile DJ‟s and clubs.
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit
under water.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs
yourself; doing so will void your manufactures warranty. In the unlikely event your unit may
require service please contact the manufacturer or your dealer.
PLEASE recycle the shipping carton whenever possible.
General Instructions
To optimize the performance of this product, please read these operating instructions carefully
to familiarize you with the basic operations of this unit. These instructions contain important
safety information regarding the use and maintenance of this unit. Please keep this manual
with the unit, for future reference.
Notice :ple
ase pay attention to ventilation, to prevent the battery
overheat cause burning When charging.
1
Charge Warning:
1.For carton box:
Please do NOT put in carton box while charging.
2.For Flight case:
Please do NOT close the case while charging.
3.For charge time:
Please do NOT charge over 10 hours.
Warning:
Please do NOT use the lamp under the close environment.
Please do NOT use the lamp under the water.
Please do NOT connect the power cable hand by hand over 5pcs.
Before open the LED outdoor wireless par can with battery light par light
and if you want to do the repair work, please make sure the power
source is at the separation condition.
Unceasingly carries on the product improvement about our company the
policy, in this instruction booklet carries the data will have the possibility
to be able to change in the future, when no longer separate notice
change matters concerned. Our company retains when the product
improvement changes the related specification the authority. This
instruction booklet publisher cannot be responsible regarding this
instruction booklet in information accuracy, also cannot the related
consequence which causes regarding these information be responsible
8

Features
● Power supply: AC100V-240V
● Frequency: 50-60Hz
● Power consumption:216W
● Light source: 12pcs 18W high brightness RGBWA+UV 6in1 LED
● Lamp life: 6-10 ten thousand hrs
● LED angle: 30(±5) degree
● Color: 16.7 million kinds of color change
● Control channels: 6/10 Ch
● Battery power & wireless DMX&WIFI
●Wireless DMX-512 protocol
●Built in 2.4G receiver/ transmitter for wireless DMX operations
● Control mode: DMX512, master/slave, auto, sound active, IR remote
● Automatic model(by function button) : color change, color strobe, color
dimmer, color gradual change/color jump change
● Operation menu: 4 digit digital LED display
●Waterproof Rating: IP65
● Packing size: 310*310*300mm
● N.W: 4.8kg
● G.W: 5.5 kg
Safety Precautions
● To reduce the risk of electrical shock or fire, do not expose this unit under
the water.
● Do not spill water or other liquids into or on to your unit.
● Be sure that the local power outlet match that of the required voltage for
your unit.
● Do not attempt to operate this unit if the power cord has been frayed or
broken. Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical shock and
fire in case of an internal short.
● Disconnect from main power before making any type of connection.
● Do not remove the cover under any conditions. There are no user
serviceable parts inside.
● Never operate this unit when it‟s cover is removed.
● Never plug this unit in to a dimmer pack.
● Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
● Do not attempt to operate this unit, if it becomes damaged.
● During long periods of non-use, disconnect the unit‟s main power.
● Always mount this unit in safe and stable matter.
● Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to the point they exit from unit.
2
There is one buttons on the rear panel of the lighting. it is for power ON/OFF
●When use the fixture with DMX, not wireless, please set the 2.4G signal menu
for “off”
●When use the wireless DMX, please set the 2.4G signal menu for “on”
● When charge the light, please switch the button for “off”. At the same time, if
the switch for power is “on”, the light will be at work during the process of charge,
but will consume some power from the charge; if the switch for power is “off”, the
light will be blackout and not be at work.
For Battery Function and Charge
The unit has the function of battery powered. The button for battery and charge is
set on the rear panel. It is showed as the following picture, and the function is
described as below.
1. LED display 2. Button switches 3. Power ON/OFF
4. Wireless Antenna 5. AIR VALVE 6. DMX-In
7. DMX-Out 8. Power in 9. Power out
7

Remote Operation
Function:
1, UP-dimming the up button
2, Down- dimming down button
3, OFF- Turn off light
4, ON- Turn on light
5, R, G, B, W, A, UV keys are 6 kinds of each color
6, 9 numeric keys for 9 static colors (AC 1...AC 9)
7, 0 button for mixed color mode, up and down adjust 32 kinds of static color
8, AUTO button is the color change mode, the up and down keys adjust speed
9, STROBE button is color strobe mode(optional 32),up and down adjust speed
10, FADE button is the gradient mode, the up and down keys adjust speed
11, SOUND button is the voice control mode,up and down adjust the voice control
Note: If you want use remote control to do master-slave function, you should be only
one light do master light and turn on IR, other slave light should be turn off IR.
Tip for the battery and charge
●The battery can last for 3-4 hours when all LEDs on after full charge , and
can last for more than 10-12 hours on auto running mode. Up to 20 Hours
with one color diode on. Results will vary based on brightness of LEDs
●It is suggested to charge the battery for at least 6 hours, which will extend
the life span of the battery.
6
● Cleaning -The fixture should be cleaned only as recommended by the
manufacturer. See “Cleaning” for details.
● Heat -The appliance should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances (including amplifiers) that
produce heat.
● The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked
change in performance
● Fuse standard is 2A/250V
● Grounded using yellow/green line
● The ambient temperature must always be under +35° C
Set Up
Power Supply: Before plugging your unit in, be sure the source voltage in
your area matches the required voltage for your light is workable in
100-240V/50~60Hz. Because line voltage may vary from venue to venue,
you should be sure your unit voltage matches the wall outlet voltage before
attempting to operate you fixture.
Operating Instructions
Operating Modes: You can use the light in 5 ways:
● Sound activation – The unit will activated by the sound signal.
● Static display – The unit will display the color in static way.
● Auto Mode -The unit will automatically chase through the different patterns.
● DMX control mode -This function will allow you to control the lighting with a
standard DMX 512 controller.
● Battery powered – This function will allow you to control the lighting
independently without any DMX cable
DMX Mode: Operating through a DMX controller give the user the freedom
to create their own programs tailored to their own individual needs. This
function also allows you to use your fixtures as pattern changing lights.
1. This function will allow you to control each individual fixtures traits with a
standard DMX 512 controller.
2. The light use 6/10 DMX channels to operate. Please see “DMX channel and
Functions” for the DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR connections
to any standard DMX controller. Set your desired DMX address following the
setup specifications that come with your DMX controller.
3

4. The unit can automatically recognize the DMX signal once the DMX
connection is done.
DMX Linking
To ensure proper DMX data transmission, when using several DMX fixtures
try to use the shortest cable path possible. The order in which fixtures are
connected in a DMX line does not influence the DMX addressing. For
example; a fixture assigned a DMX address of 1 may be placed anywhere
in a DMX line, at the beginning, at the end, or anywhere in the middle.
When a fixture is assigned a DMX address of 1, the DMX controller knows
to send DATA assigned to address 1 to that unit, no matter where it is
located in the DMX chain.
Buttons instruction
There are four touch buttons under the LED Alpha-numerical display: Menu,
Down, Up, Enter. Normally, the LED will display the current DMX address
code of the fixture. At this time, presses Menu to choose the function you
want to set up. Press and hold Up or Down to fast scrolling within the menu
options. When an options flashing the LED display, press Enter to confirm
and Menu to exit.
Menu up down Enter
No.
Display
Function
1 A001
A001—A512 (DMX address setting) press “UP” and “Down”
button change the DMX address
2 CHND
6CH/10CH
Channel choose (6CH/10
CH) Press “UP” and “Down” button change
the DMX Channel
4 CL01
CL01—CL32 (Color Mixing), press “UP” and “Down” button
change the mixing color
5 CC01
CC01—CC99 (Color change by Snapping), press “UP” and “Down”
button change the Snapping speed
6 EE01
EE01—EE99 (Color change by Fade), press “UP” and “Down”
button change the Fade speed
7 FF01
FF01—FF99 (Color change by pulse), press “UP” and “Down”
button change the pulse speed
8 ST01
ST01—ST99 (Strobe by hand), press “UP” and “Down” button
change the strobe speed
9 SOU1
Sound mode 1/2/3/4
（
press “UP” and “Down” button change
）
When you press enter key,it can be adjustment Sound sensitivity
10
POUR
-ON/OFF
Turn light ON/OFF(when you setting it ON, you can press the
MENU button for 3 seconds to turn on or turn off light.
11
IRCL
-ON/OFF
IR remote ON/OFF
12 2.4G -ON/OFF 2.4G wireless ON/OFF
4
13
R000
R000—R255 (Red dimming by hand)
14
G000
G000—G255 (Green dimming by hand)
15
B000
B000—B255 (Blue dimming by hand)
16
U000
U000—U255 (White dimming by hand)
17
Y000
Y000—Y255 (Amber dimming by hand)
18
P000
P000—P255 (Purple dimming by hand)
19 T000 Temperature display, this light no function)
＊If there is no operation after 30 seconds, the LED display will display the power
level(----), which is 25 percent per grid.
DMX Channel
Channel
Value
6CH
10CH
CH1
0
Off
Off
1-255
Red dimmer
Main dimmer
CH2
0
Off
Off
1-255
Green dimmer
Red dimmer
CH3
0
Off
Off
1-255
Blue dimmer
Green dimmer
CH4
0
Off
Off
1-255
White dimmer
Blue dimmer
CH5
0
Off
Off
1-255
Amber dimmer
White dimmer
CH6
0
Off
Off
1-255
Purple dimmer
Amber dimmer
CH7
0
Off
1-255
Purple dimmer
CH8
0-9
Off
10-255
Strobe function slow-fast
CH9
0-9
Off
10-50
Color mixing (with CH10 to change color)
51-100
Color change by Snapping(with CH10 to use)
101-150
Color change by Fade(with CH10 to use)
151-200
Color change by pulse(with CH10 to use)
201-220
Sound mode 1
221-240
Sound mode 2
241-255
Sound mode 3
CH10
0
No action
1-255
Speed control slow to fast
5